Pay in installments of $6.64 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 20 - Jul 25
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
do all britax bases compatible Britax B-Safe Gen2 FlexFit Infant Car SeatB Safe Gen2 FlexFit pairs trusted Britax safety with the best fit for baby. As the next generation of Britax infant car seats, it has a spacious seating area and tagless smooth touch knit fabric. A steel reinforced base & SafeCell crumple zone give you peace of mind. Two layers of side impact protection surround the head, neck & torso. No rethread harness moves with the headrest for easy height adjustment as baby grows. Easy to install with or without
B-Safe Gen2 FlexFit pairs trusted Britax safety with the best fit for baby. As the next generation of Britax infant car seats, it has a spacious seating area and tagless smooth-touch knit fabric. A steel reinforced base & SafeCell crumple zone give you peace of mind. Two layers of side impact protection surround the head, neck & torso. No-rethread harness moves with the headrest for easy height adjustment as baby grows. Easy to install with or without the base.
Specifications
- Looking for B-Safe Ultra? B-Safe® Gen2™ FlexFitTM is the next generation of Britax infant car seats, made with a spacious seating area and smooth-touch fabric.
- Tagless fabric helps prevent irritation behind your baby’s head; covered harness release button.
- 6-Position, Quick-Adjust Harness & Headrest move together to create the perfect fit as your baby grows—no rethreading, ever!
- Sturdy Build gives you peace of mind while you’re on the go with your baby.
- 2 Layers of Side Impact Protection: Energy-absorbing shell & foam-lined headrest surround the head, neck, and torso.
- High Strength Steel reinforces the car seat base to help keep it stabilized.
- Patented SafeCell Technology acts as a crumple zone, absorbing crash energy to help keep it away from your little one.
- European Belt Guide provides increased stability when installed without the base.
- Exclusive SafeCenter LATCH for secure installation in 3 easy steps: connect lower anchors, pull straps to tighten, click carrier into the base.
- Quick-Push LATCH Connectors lock into place with a click and are easily released with the push of a button.
- 1-Hand Buckle Release to quickly and easily unbuckle baby and keep moving.
- Soft Comfort Pads help keep your child’s neck from rubbing against the harness.
- Built-In Lock-Offs help to ensure a snug vehicle seat belt installation with minimal effort.
- Spring-Assisted Recline helps you find the best installation angle for your vehicle.
- Easy-Read Level Indicators are visible from all angles, clearly displaying the proper installation position for your vehicle.
- Removable Infant Pillow gives your newborn baby support when they are under 11 lbs.
- The ergonomic handle is comfortable to carry with your hand or forearm.
- SPF 50+ Extra-Large Canopy protects your little one from sun and rain.
- Click & Go Stroller Compatibility allows you to pair the car seat with any Britax stroller.
Dimensions & Weight
- 17.9" W x 25.85" H x 26.6" L
- Product Weight - Car Seat Only - 11.6 lbs.
- Product Weight - Base Only - 9 lbs.
- For children 4 - 35 lbs., 32" or less.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 8 reviews
Sort
Product Reviews
★★★★★ 5
Decent copper clad aluminum
Size: 14AWG-50FT
If you want the best wire, you should probably go with pure copper wire. It is more expensive but conducts better and thus is more efficient and less likely to heat up. If you are doing a low power, short run of cable, however, this wire should serve your purposes well.
My purposes for such wire are varied. I am a licensed ham, like to build circuits, and have an electrical engineering degree. Depending on the specific tasks I'm on, some I'll gladly use this wire, others I'll go with pure copper.
In comparison to other similar copper clad aluminum wire I've used in the past, the wire is pretty flexible and easy to work with. I also prefer the softer insulation like this has. You need to fit the wire to the job but if you have the job this is right for, it'll serve you well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2024
★★★★★ 5
good wire for the price
Size: 14AWG-50FT
This speaker wire is of good quality. I don’t know what to say about it besides that its 14 gauge, which is a bit on the thick side, but good for getting high quality sound or for doing long runs of cable. Its not pure copper, but that's not really necessary unless you are an audiophile and even then, i wonder if its really noticeable. The 50 feet it comes with is enough for a 5.1 surround system, as long as your speakers aren’t too far away. I haven't noticed any weird sounds from my system after setting it up with this cable. The housing is relatively thick but not shielded, so I was careful to keep it away from power cords. All in all this is good cable, especially for the price, and I would purchase it again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2024
★★★★★ 4
Not as good as pure copper, but maybe good enough
Size: 14AWG-50FT, Size: 14AWG-50FT
This wire is copper-clad aluminum, which means you sacrifice some conductivity for a for a less expensive conductor. This wire is very lightly clad with copper - the thinness of the copper coating is obvious from a casual observation (see image).
I measured 4-wire resistance across the entire length (50') of wire - it comes out to 0.34 ohms on each lead. This is a bit less than double what you'd expect from an equivalent length of the same gauge of multistrand copper, so if you're planning on running a long length of this it might be prudent to pretend that you're working with a slightly smaller gauge than you actually are. That is exactly the approach I'm taking with it, and it works well for me within that context.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2024
★★★★★ 5
Great speaker wire
Size: 14AWG-50FT
I ordered this speaker wire to replace my speakers in my car. I highly appreciated that there are 50' included on this spool, it's perfect for rewiring the stereo speakers in a car (or house). The wire appears to be made well and is the correct gauge. The sound quality is great with my new speakers, and I am highly impressed.
I recommend this speaker wire to others, it's exactly what I needed and has met my expectations for high quality speaker wire.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2024
★★★★★ 3
Higher resistance than expected
Size: 14AWG-50FT, Size: 14AWG-50FT
I like Nilight products, I really do, but this one isn’t as good as it could be. After reading other reviews I wanted to take a different test approach and measure the resistance of the whole roll. I thought this might explain the low rating of 5.6A at 12V. I believe my test explains this rating. First, you need to make sure you understand that this is copper clad aluminum. It is clear in the ad title but make sure you are good with that.
The test consisted of me removing the entire 50 feet of wire from the spool to reach the other end. I then stripped back the end and tied the two together securely. Only soldering would have produced a more complete contact. I then tested the resistance of the roll with an Agilent U251B multimeter which gave the reading in the pic of .75ohms. That’s not much but compared to what I found on several charts that was high.
The average resistance of 14 gauge 41 strand copper wire should be 2.63ohms per 1000 feet or .1315 per 50 feet. The wire tested 5.7 times greater resistance. Obviously aluminum will test with more resistance than pure copper but I was unable to find what those values should be.
The insulation is thick and durable so abrasion wear shouldn’t be an issue if routed properly.
The wire may still be great for your application but if you are considering pushing this wire to the load limit you may want to upsize to 12 gauge.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 27, 2024