Pay in installments of $5.17 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 20 - Jul 25
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cherry red philodendron care Philodendron 'Cherry Red'Philodendron 'Cherry Red' Philodendron Family: Araceae Pot diameter: 12 cm Height: 30 cm No moss pole needed just your company Philodendron 'Cherry Red' is a stunning variety with cherry red new growth maturing into deep green with bronze tones. A compact, self heading design plant for interiors, offering tropical flair with minimal care. Araceae Evergreen Filtered light Moderate care Self heading hybrid Light Filtered Bright indirect, no harsh sun
Philodendron 'Cherry Red' — Philodendron
Family: Araceae • Pot diameter: 12 cm • Height: 30 cm
No moss pole needed — just your company 🪴
Philodendron 'Cherry Red' is a stunning variety with cherry-red new growth maturing into deep green with bronze tones. A compact, self-heading design plant for interiors, offering tropical flair with minimal care.
Araceae Evergreen Filtered light Moderate care Self-heading hybrid
Light
🔆 Filtered
Bright indirect, no harsh sun
Water
💧 Moderate
Slightly moist soil, never soggy
Temperature
🌡️ 18–27°C
Stable indoor climate, draft-free
Soil
🌱 Airy mix
Aroid blend with good drainage
What makes it special
- 🍒 Striking cherry-red new foliage
- ✨ Bronze-green maturity for a continuous color show
- 🪴 Compact, self-heading habit (no pole needed)
Best uses
- 🎨 Design interiors where color is the focus
- 🛋️ Shelves, consoles, coffee tables
- 🌴 Part of an “Aroid care” collection with other Philodendrons
Where to place it
Bright indirect light with stable temperatures and good airflow. Avoid direct midday sun and cold drafts.
Best plant companions
- 🌱 With Philodendron 'Prince of Orange' for warm tones
- 🍃 With Philodendron erubescens types for gradient foliage
- 🌿 With Anthurium for a premium tropical vibe
Variety origin
Philodendron 'Cherry Red' is a horticultural hybrid selected for vivid red new leaves and a compact, self-heading form. Likely related to the P. erubescens group, known for its reddish juvenile foliage.
Developed for interiors to deliver a reliable color “flash” with each new leaf, while being easy to care for. Its popularity comes from its showy foliage without the need for climbing support, ideal for modern homes and offices.
1) Soil: Airy aroid mix (peat/bark/perlite) with excellent drainage.
2) Watering: Water when the top 2–3 cm dry out; never let it sit in soggy soil.
3) Light/Temperature: Bright indirect light, 18–27°C; keep away from drafts and scorching sun.
| 🔎 Detail | Info |
|---|---|
| 🌿 Species | Philodendron 'Cherry Red' |
| 🪴 Pot/Size | 12 cm • 30 cm tall |
| 🔆 Light | Filtered light, bright shade |
| 💧 Water | Moderate, slightly moist soil |
| 🌡️ Temperature | 18–27°C |
| 📈 Growth | Compact, self-heading |
| 🧪 Toxicity | Caution: Contains calcium oxalates, can irritate if ingested/contacted |
💡 Tip: To enhance red flush, provide abundant indirect light and balanced slow-release fertilizer.
🤔 Did you know? Self-heading Philodendron hybrids form rosettes without support, giving a full, bushy look at low height.
Why you'll love it
🍒 Cherry-red flushes that steal the show.
🪴 Compact habit for shelves and consoles.
✨ Easy care with a premium look.
🧠 Greenleaf geek facts — Plant science nobody asked for
🌿 Subfamily Aroideae (aroids).
🧬 Red flush due to anthocyanins in new foliage.
🌱 Self-heading habit; no staking required.
💧 Prefers 50–70% humidity and aerated substrate.
✂️ Propagation by crown division or stem cuttings.
🔆 What light does it need?
Bright filtered light; avoid direct sun to preserve foliage color.
💧 How often should I water?
When the top 2–3 cm of soil dry out; reduce frequency in winter.
🌡️ What temperatures does it prefer?
Ideally 18–27°C; protect from drafts and sudden fluctuations.
🌱 What soil does it need?
Airy, well-draining aroid mix (peat, bark, perlite/pumice).
© Original plant description by Greenleaf Garden Center. All rights reserved. | Το κείμενο αποτελεί πρωτότυπο υλικό. Απαγορεύεται η αντιγραφή (Νόμος 2121/1993).
🔎 Note: Due to natural plant variation, the specimen you receive may differ slightly from the photo in form, size, or coloration depending on season and growing conditions.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 7 reviews
Sort
Product Reviews
★★★★★ 4
The basic set-up is relatively easy which was a big plus for me......
First let me start off by saying that I am not an audiophile. So, this review will not get into the weeds of the more complex settings this receiver is capable of. For example, the Dirac room measuring option. No way was I attempting to mess with that. Especially, after reading that some reviewers who actually have experience with Dirac found it could be confusing/difficult to set up. Besides I come from a previous Onkyo the TX-SR607 which had the AccuEQ Room Calibration similar to this receiver, so I used that instead with no issues. As far as hooking up the speakers it's pretty straight forward. If you have banana plugs, use them, seriously. I originally planned on using banana plugs but in order to save time I decided against that. But I wish I had taken the extra time to go with bananas because trying to thread the speaker wire into the speaker terminals is tedious, there not much room between the terminals and even me with my skinny fingers struggled a bit. Wish Onkyo designed their terminals side by side, but I think only Denon does that. Anyway, after all the speakers were connected (I'm currently using a 5.1.2 setup) and I connected my tv, Blu-ray player, CD player, etc., etc., I ran the AccuEQ Room Calibration, and I was good to go. I did change the some of the settings like speaker volume that AccuEQ has set but nothing major. I have noticed that I need to turn the volume up much higher on this Onkyo than on my previous one. What I mean by that is that on my previous Onkyo I would set the volume indicator at around 30-35 tops for movies. With this one it's more like 40-45, maybe how the volume is measured is different on this one. The sound is excellent for movies and music I have no complaints there. I have only tried a few of features so far like Airplay but will dig deeper into the manual (I downloaded from the internet) as time goes by. I will say as far as build quality is concerned it's not bad, but IMO my old Onkyo, a 2009 model, had the look and feel of a more expensive receiver. But it's what's inside that matters most so hopefully this one last as long as my previous Onkyo.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2024
★★★★★ 1
Sound unexpectantly blasted for no reason. It malfunctioned!
I spent hours between installation and set up! I had to return it. I turned on NET (network) to play Sirius Xm and the volume was low but after a few minutes the sound turned all the way up to maximum completely on its own? This happened at least two more times. I contacted ONKYO and was told it is clearly defective and that their is no solution to correct the problem, and that I should return it immediately! I purchased the newer model and am pleased with its performance! It’s unfortunate because the first one that had the issue with the sound really played nice, but having sound change its volume so suddenly to its full capacity was not what I expected, nor felt comfortable enough to keep as I said I was told to return it, which I did! My advice here would be to purchase the newer model, which seems to be much more stable in its performance, and the quality is excellent.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
★★★★★ 5
Absolutely Love This Receiver
The Onkyo TX‑NR7100 has completely transformed my home theater. The sound quality is rich, detailed, and powerful, and the 9.2‑channel setup gives movies and music a level of immersion I didn’t realize I was missing. Dirac Live right out of the box is a huge win — the room correction made an immediate, noticeable improvement.
Setup was smooth, the interface is clean, and everything from streaming to switching inputs feels fast and reliable. It also plays perfectly with the rest of my system, and the THX certification really shows in how cinematic everything sounds.
I absolutely love this receiver. It’s one of those upgrades that makes you wonder why you didn’t do it sooner.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
★★★★★ 5
Incredible 9.2 Surround receiver at an unbeatable price.
I may return at a future date to give a more complete review, but others that are much more knowledgeable about audio equipment than I have already done so.
For me, the Onkyo (Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver) replaced a much older (2001) TX DS787 5.1 100 W Surround receiver that listed new for around $1050. I probably didn't pay quite that much but certainly something near $900. It was great for its time, perhaps even advanced with THX, Dolby, and other listening modes.
But it didn't have: HDMI inputs or outputs, any BlueTooth capability, no hard wired or WiFi connectivity or basically any operating or connection modes that most all modern receivers have. This turned into a big problem with modern LED/LCD/OLED TVs, Alexa and other now common devices.
I bought my new Onkyo TX-NR7100 from Amazon for $625. Other retailers (e.g.Best Buy) advertise it for up to $1200, so Amazon's price is outstanding. Set up was far more complicated (for me) than any previous receiver that I ever owned, mostly because there were a very large number of back panel input and output jacks, to and from the TV, as well as speaker outputs for 9.2 surround.
Suffice it to say that once everything was connected properly (I made a few mistakes along the way), I was completely thrilled. The On Screen Display, completely accessible either from the front panel or the remote was far superior to anything I had ever seen before. Literally every operating parameter is accessible to the user. And I used most of them.
It is also completely WiFi ready so my 150 Gbit home Wifi network lets it connect wirelessly and stream music error free. BlueTooth is also another way to connect almost any device to it for audio and audio/video playback if you connect the digital connections to and from a modern TV. It also speaks and listens to Alexa, although I must confess that I haven't played around with that much yet.
This is already much longer than I had intended, so let it suffice to say that the Onkyo TX-NR7100 is an absolutely incredible receiver for an incredible price. I'd give it 8 stars if I could.
JM TEPPER
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2024
★★★★★ 5
Sounds great.
Just received my Onkyo TX-NR 7100, watched a few YouTube videos before it arrived, so set up was easy. Ran accuEQ, I am getting new front speakers so I’ll wait to run Dirac. After accuEQ, I still had to make a few adjustments, to the speaker levels and especially the sub. It set my subwoofer way too low. As of right now having no problems with Bluetooth. I’ve only listened to music so far, can’t wait to watch a movie. For now I have a 5.1.2. System, getting new fronts, the Klipsch r51-m’s will go to the rear surround and Klipsch r41-m’s will be my height speakers in a 5.1.4 system. So far loving this avr.
Update 2: Just calibrated with Dirac for the 6th time. They tell you if you sit in a recliner, reclined measure with it reclined. Well I measured with the chair in its upright position. It makes a huge difference I hear the surrounds much better. Btw I listen to all channel stereo, I know audiophiles say it sucks, however I listened to 2 channel stereo for 20 years, when there was nothing else. I didn’t buy a 9 channel avr to listen to 2 channel stereo. Like Randy the cheap audio man says “ audiophiles aren’t always right. If it sounds good to you, that’s all that matters.” So try calibrating in the upright position, or if you sit on a stationary chair or couch, try positioning the mic slightly forward of your listening position. It makes a huge difference. Hope this helps, enjoy.
Update:
Ok bought Klipsch rp-600m speakers for the front with 52c center. 51m surrounds, 41m rear heights. Polk owm3 front heights. Why Polk? Lighter easy to hang and as height speakers they are only there for atmos. Ran Dirac live, the application does what it would take several hours to make it sound like it does, if I even could get it to sound so good. Apple TV 4K with my Hisense U8K. The google tv interface is ok, but Apple TV is faster and easier. The Onkyo 7100 is a gem, runs pretty warm but I have it out in the open. If you are going to put in a cabinet I suggest a fan. Very happy with the whole system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025