Pay in installments of $7.05 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex sirona s manhattan grey CYBEX Sirona S Convertible Car Seat | Infant SeatThe Cybex Sirona S 360 is the ONLY convertible car seat to feature a 360 rotatable seat with load leg stability, linear side impact protection, and SensorSafe technology. This Sirona S 360 rotating convertible car seat is the first model to include an innovative 360 rotatable seat with load leg technology, making switching between rear facing and forward facing positions quick and easy. The Sirona S car seat's load leg stabilizes the seat and can
The Cybex Sirona S 360 is the ONLY convertible car seat to feature a 360-rotatable seat with load leg stability, linear side impact protection, and SensorSafe technology.
This Sirona S 360 rotating convertible car seat is the first model to include an innovative 360° rotatable seat with load leg technology, making switching between rear-facing and forward-facing positions quick and easy.
The Sirona S car seat's load leg stabilizes the seat and can significantly reduce crash forces. These features, combined with an EasyLock bar for quick, simple, and secure installation, offer advanced safety protection for children — and greater peace of mind for parents.
SensorSafe™
The smart-tech harness chest clip with SensorSafe™ technology makes the Sirona S SensorSafe convertible seat even safer, providing alerts when unsafe situations arise — including if a child unbuckles themselves while the vehicle is in motion, if the back seat has become too warm or too cold, if a child has been seated for too long, or if the driver accidentally leaves the child behind after the vehicle has been switched off. These alerts are provided through an installed vehicle receiver and the user-friendly smartphone SensorSafe App.
Product Features :
-
An innovative, one-hand 360° rotatable seat allows parents to easily get their child in and out — a signature feature of the Cybex Sirona S 360
-
The load leg stabilizes the car seat and can reduce rotation in certain crashes by up to 30%
-
The only convertible car seat in North America with a one-time vehicle belt installation for both rear-facing and forward-facing modes
-
EasyLock bar reduces the force needed up to 4x for quick, simple, and secure installation
-
A smart-tech harness chest clip with SensorSafe technology alerts parents if their child becomes unbuckled, the car temp gets too warm, or unsafe conditions arise
-
12-position recline adjustment, even while the seat is in use
-
Linear Side-impact Protection absorbs up to 25% more impact in a collision, making the Cybex Sirona S 360 one of the safest convertible car seats
-
An anti-rebound design reduces car seat rebound movement
-
Magnetic buckle holders make entry and exit from the seat a breeze
-
A dishwasher-safe cup holder can be positioned on either side of the seat
-
12-position, height-adjustable headrest with no-rethread harness
-
Dual-level indicators help ensure the proper car seat angle
-
A steel-reinforced frame provides strength and durability
-
Harness pads and a 3-position padded buckle provide extra comfort
-
Removable newborn insert provides support for small babies
-
Innovative one-pull LATCH removal system
- LATCH Connection storage inside the base when not in use
-
Rear-facing from 4 lbs. to 50 lbs. Forward-facing from 22 lbs. to 65 lbs. — making the Cybex Sirona S 360 a safe choice as your child grows (when compared to the same car seat without L.S.P. extended)
-
SensorSafe is compatible with most vehicles 2008 or newer with an OBD II port. For some electric vehicles, contact Cybex as an additional adapter may be needed
-
Measurements of the Sirona S 360 rotating convertible car seat: Forward-facing (Fully upright) 25.5” H x 20” W x 25.3” D Weight: 30.4 lbs.
- Use from birth up to 65 lbs. or 49 inches, following the directions in your user manual
Product Details :
-
Group: Convertible Car Seat
-
Height: max. 49 in
-
Weight: From 4 lbs. up to 65 lbs.
-
Age: From newborn to approx. 4 years
- 2-year limited manufacturer's warranty
- Care: Fabrics machine washable cold, delicate cycle, with a mild detergent.
Functions :
-
SensorSafe™ Technology
-
12-Position Recline
-
Linear Side Impact Protection (L.S.P.)
-
Anti-Rebound Design
- Magnetic Buckle Holders
Upgrade to the Cybex Sirona S 360 today and experience the Sirona S car seat advantage for unmatched safety and convenience! Order now at Kido Bébé!
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 8 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Great Product that does exactly what it says it will.
Color: Beige, Size: 34"- 3 Panel
I really enjoy this product and it does exactly what it describes. I use it on my balcony. It is effective, but still very lightweight. It is easy to assemble as well. The price point is excellent. Also, I had an interaction with the company about an issue and they were incredibly responsive and helpful, fixing the issue immediately. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 3, 2026
★★★★★ 5
Great WFH screen for video calls
Color: Black, Size: 22"- 4 Panel
I share a workspace with my hubs since we both work from home. I have the attention span of a 🐿️ and need this so I can focus on my work and not get distracted by him, since he is very amusing to watch. This screen is very lightweight and the panels can move and create a little cubicle around your workspace. I personally loved cubicles & despise open space seating, even at home. The ADHDer in my loves being able to block things away from my field of vision.
These panels also hide any mess behind you, especially if you forget to blur the background on Teams or Zoom calls or if you don’t have the option to change your backgrounds.
This was fairly easy to put together and very easy to move and adjust. The screen is a much better option than a sheet as I’ve seen others use on calls.🤦🏻♀️😂 I’m not sure how it will stand up around rambunctious pets or kids, but fairly certain it takes quite a push to knock it over. We have four cats & I’m pretty sure someone would try to climb this, which is why they’re not allowed in our workspace.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 10, 2025
★★★★★ 4
Difficult to assemble, but a good basic divider
Color: Beige, Size: 22"- 4 Panel
I bought this to use as a background for when I have video calls. I wish I'd ordered the 6- or even 8-panel to block a little more, but that's my own error. It still covers a good portion of the room, so I'll make do, or maybe buy another at a later date to expand it.
It looks ok, if a little plain. The fabric panels have creases in them from being folded and will need to be steamed or ironed out for a nicer look. It would be easy to make your own panels as well, if you're so inclined.
The construction is decent. The frame is lightweight and if you don't angle the base supports the right way it may tip over if you extend it too far. The fabric panels aren't the highest quality, but are sturdy enough. They seem like they would handle being thrown in the wash well.
The only issue I have with it is that it was so difficult to put together. The push latches that connect the poles don't push it well and hurt my hands. The fabric panels are sized to be extremely taut, which makes it very difficult to get them on the bars without forcing the bar to bend slightly.
Overall, this is a good divider if you're looking for something simple and functional without being too worried about aesthetic. It's also a good, inexpensive base if you want to make your own custom panels.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
★★★★★ 5
Great Room divider
Color: Beige, Size: 34"- 3 Panel
Works well in separating my kids play area from my computer/office room. Easy to put together, height is perfect somewhat sturdy, looks great, light weight, not good if you are using it as a door, but if it is to stay in place than it is stable enough.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 3, 2025