SKU: 16448405853
dracaenas

dracaenas 8-in Dracaena Marginata

Sale price$21.50 Regular price$23.89
Save 10%

Pay in installments of $5.97 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 9 - Sep 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

dracaenas 8-in Dracaena MarginataSUN The Dracaena Marginata prefers medium to bright, indirect light, though it can tolerate lower light levels. Placement at the interior of a room or light filtered through blinds will avoid leaf burn caused by direct sunlight. WATER Water generously once the top 50% 75% of the soil has dried. They can handle occasional dry conditions but grow best under consistent care. Reduce frequency during fall and winter. AIR Average indoor air tends to work

SUN

The Dracaena Marginata prefers medium to bright, indirect light, though it can tolerate lower light levels. Placement at the interior of a room or light filtered through blinds will avoid leaf burn caused by direct sunlight. 

WATER

Water generously once the top 50%-75% of the soil has dried. They can handle occasional dry conditions but grow best under consistent care. Reduce frequency during fall and winter. 

AIR 

Average indoor air tends to work well for the Dracaena, though these come from subtropical regions and will thrive under their natural conditions. Maintain temperatures between 70º-85º and extra humidity. You can provide a regular boost of humidity by:


  • Misting the leaves 2-4x per week with non-tap water
  • Adding a humidifier nearby
  • Creating a pebble tray that lives underneath the pot
  • Placement in a bathroom or kitchen, if lighting is suitable

PET FRIENDLY

Keep out of reach from curious pets. These are toxic when ingested.

AESTHETIC

Native to subtropical Madagascar, the Dracaena Marginata grows upright on tall, asymmetrical branches with sturdy and narrow, sword-like leaves. Their name is derived from the Greek word for “female dragon” due to the red border along the leaves and red-colored sap emitted by the plant when injured. A white stripe runs through the middle of each leaf, creating a beautiful tricolor masterpiece. Under proper care indoors, these can grow up to 6-10 feet tall in their lifetime.

HEALTH BENEFITS

Active exposure to and care for plants has many proven wellbeing benefits, such as: 


  • Lower stress levels
  • Improved mood
  • Superior mental clarity and focus

Dracaena Marginatas are fantastic air purifiers, producing oxygen while absorbing the most common indoor toxins and carbon dioxide through the leaves and soil.  

SPIRITUAL INTERPRETATIONS

Dracaena Marginatas carry the symbol of good fortune and happiness. It becomes an emblem of positive energy in any dedicated space such as the dining room or office. According to ancient Feng Shui practices, intentional placement at the center of your home attracts this energy towards health and overall wellbeing.

DIFFICULTY LEVEL

Easy Intermediate Experienced 

WHAT’S INCLUDED

Arriving to you in careful packaging:


  • Live Dracaena Marginata plant
  • Temporary 8-inch nursery pot
  • Care card with tips for success 
  • Grounded Office Hours: Complimentary 1-on-1 support from our Plant Specialist

OUR RECS

We recommend a ceramic or clay planter with a drainage hole to provide ideal moisture balance for the Dracaena. When repotting, keep it in a planter of the same size or no more than 2 inches larger.  


Ideal soil is a well-draining mix with aerating and moisture-retaining amendments such as perlite, sand, and vermiculite.


Nature is unique - each plant may vary slightly from the plant shown here. Ceramic planters are sold separately.


Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 16448405853

Discover Niche Categories That Outsell dracaenas

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
SOmeone
Houston, US
★★★★★ 1
Did not work.
Size: 96158T-2PCS
I went to double check that I can read but it says 35hp-275hp and it sure didn’t work on my 200ho mercury so I do not recommend. If you’re on a time crunch don’t push your luck buy OEM like I am doing right after this review.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
J
Verified Purchase
James
Draper, US
★★★★★ 5
Great Banana Plugs
Size: 6 Pairs / 12 pcs
I recently purchased these FosPower banana plugs to tidy up my speaker wiring, and they’ve been a significant improvement over bare wire ends. Installation is straightforward: strip the wire, loosen the two tiny set screws, slide the wire in, tighten everything down, and then screw the barrel back on. Once assembled, the connection feels secure and tight, making it much easier to swap gear around and reducing the risk of stray strands causing a short. The standout feature of this design is the dual set-screw clamp. It firmly grips the speaker wire without relying on the outer collar to “crush” it in place. I’m using 12-gauge wire, and it holds well for my setup. Initially, the plugs may fit snugly in some binding posts. Once seated, there’s no wobble, but it might take a bit of extra push the first time. The set screws are small, so a bit of precision is needed. Use a small flathead screwdriver and don’t over-tighten them. Overall, these plugs feel well-made, look clean once installed, and fulfill their purpose as banana plugs: making speaker connections quick, neat, and reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
T
Verified Purchase
Todd C Blake
Port Orchard, US
★★★★★ 5
Great Banana Plugs!
Size: 6 Pairs / 12 pcs
These FosPower banana plugs work very well. I have used dozens of these great FosPower banana plugs over the years, and they definitely work as advertised. When comparing apples to apples (or bananas in this case....lol), all Banana plugs work virtually the same way, and these banana plugs are no different. Strip speaker wire, unscrew banana plug cover, loosen speaker wire retaining screw(s), insert speaker wire, tighten speaker wire retaining screw(s), screw on banana plug cover, and wallah, a secure/conductive speaker/amplifier wire connector is created. Albeit, some banana plugs require the speaker wire to be splayed over a hollow post, and then they are held down by a screw-on retainer/cover. However, I much prefer these FosPower dual retaining screw type of banana plugs for their speaker wire holding ability. I always use high quality 14 gauge OFC speaker wire with these FosPower banana plugs, and they work perfectly together. I have used these FosPower banana plugs with many different speaker and amplifier brands over the years, including Klipsch, Pioneer, Polk, Denon, Dayton Audio, and Fosi with no problems at all. They just work, and work well. I have never had a FosPower banana plug break, release the speaker wire or short out, in all of the years that I have used them. Yes, these FosPower banana plugs do fit rather tightly into the connectors, at first, on a lot of speaker and amplifier brands/models. However, after the initial "squeeze" the banana plugs will lossen up, and become easier to install and remove. However, they still retain their great holding ability even after the initial squeeze. In order to overcome this initial "tightness," I usually just stick the FosPower banana plugs into a connector of an old portable amplifier, before assembling them, in order to squeeze them before inserting them into their final speaker or amplifier destinations. This is especially useful when working in tight places, where there is not much room to work in order to push the FosPower banana plugs into their tight connections firmly. Overall, I highly recommend these FosPower banana plugs. I am currently using them all over the house and shop for home theater and music listening (and testing projects). Just be aware of the tight fit in some speakers and amplifiers. Also, the 2 very tiny speaker wire retaining screws can be a challenge sometimes. Just use a good standard blade jewelers screwdriver, and be careful not to remove the retaining screws all of the way or over-tighten them. Once these things are mastered, using these FosPower banana plugs becomes second nature. Have fun!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 28, 2024
S
Verified Purchase
Steve M Vedder
Phoenix, US
★★★★★ 5
Great Product
Size: 6 Pairs / 12 pcs
These banana plugs have worked perfectly, no matter what gauge I have run in them, they work great. Easy assembly and great quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
P
Verified Purchase
PowerTripp
Massapequa, US
★★★★★ 4
The most legit banana plugs I could find on Amazon
Size: 6 Pairs / 12 pcs, Size: 6 Pairs / 12 pcs
NEW PREFACE:: I am kind of glad I first bought the horribly magnetic, horribly made and GOLD PAINTED Sewell crimp on plugs (some reviewers say that Sewell are better and easier to use than the FosPower, which is true in design, but in quality of materials FosPower beats them hands down!!) ... Changing from those to these FosPower plugs plus the Monoprice 90° plugs, I am flabbergasted at the difference they make in sound quality. I have heard people say that they can hear the difference and even as an audiophile I was skeptical..... but my skepticism has been completely erased by what I am hearing with my own ears. I waited a few days to make sure I wasn’t just tripping before updating this review 🤣....but it has become clear to me how much a difference plugs made from the right materials actually make!!! I am 100% serious that the bass coming out of my Polk Signature Series tower speakers has at least doubled at the same volume. I can also now turn the volume up Way past my max volume before, without any distortion and much more clarity and less harsh highs. Everything just sounds warmer in general now which is amazing!!!! This is dangerous info for me... because now I’m thinking about making some really nice custom wires to see how much of a difference that makes 🙄🙄🤣 OK onto the review of the actual plugs here~~ These seem like decent connectors. I can’t tell if they are brass or copper, but they only have a slight hint of a magnetic property when testing them with a very powerful magnet. I was easily able to fit x2 - 14ga wires into it for bi-wiring purposes, including screwing on the collar. (As seen in my example pic) The gold plating on the tips seems legit and not painted like some of the plugs from Sewell... I have tested and tried quite a few plugs from Amazon and most seem to be crap. These however hold up better than most! These and the Monoprice 90° banana plugs with the black and red rubber sleeves. The latter are gold plated copper and have zero magnetic properties. (if you need 90° banana plugs) UPDATE: still the best plugs I have found, but upon full install found two issues. One is a defect where a set of the plug threads for the barrel cover body weren’t cut right. The body’s do not tighten and stay loose because of that. Obvious issue for vibration with metal on metal... The other issue is that even though these say they can fit different gauge wires, they seem to be geared more towards 12 or 10 gauge. I am using semi solid strand 14 gauge and find that unless I fold the wire over to make it double thick, the bolts use up all the thread and seem to become kind of loose inside the body. They won’t fully seat and keep spinning no matter how much you tighten. They seem to stay secure still but I just wonder about longevity over time with vibrations. So I just doubled up the wire and they seated fine! Not the worst issue in the world, but just kind of a pain since you have to strip the wire longer than you normally would so you can fold it over. ANOTHER UPDATE: I had to remove these plugs from the wire to connect them to a crappy spring terminal amp while my better amp was in the shop. The issue I wrote about with the set screws "bottoming out" on smaller gauge wire became a more pronounced issue! I could not unscrew the set screws anymore and just had to cut the wires... So that means I will need to purchase more of these to replace the ones I cannot get wire back into. Not the best design, but still one of the best plugs I have found on Amazon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2021

recommand products