SKU: 26617669119
peg perego 24 volt conversion

peg perego 24 volt conversion 24 Volt Conversion for 12 Volt Power Wheels w/ charger – ML Toys Store

Sale price$25.90 Regular price$28.78
Save 10%

Pay in installments of $7.20 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 22 - Jul 27

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

peg perego 24 volt conversion 24 Volt Conversion for 12 Volt Power Wheels w/ charger – ML Toys StoreThis kit converts any 12v grey battery Power Wheels to 24 volts and allows you to go back to 12 volts whenever you want. It also increases run time 33% over the stock battery. Includes a 24 volt charger that will recharge the batteries in 6 hours. Indicator light to let you know when batteries are charged and conditioner so you don't ruin the batteries over the winter. Kit Includes: 2 of our 12v 12amp batteries wired to 24 volts with 40 amp fuse and

This kit converts any 12v grey battery Power Wheels to 24 volts and allows you to go back to 12 volts whenever you want. It also increases run time 33% over the stock battery. Includes a 24 volt charger that will recharge the batteries in 6 hours. Indicator light to let you know when batteries are charged and conditioner so you don't ruin the batteries over the winter.

Kit Includes:
2 of our 12v 12amp batteries wired to 24 volts with 40 amp fuse and Power Wheels style connector
1 24 volt charger-conditioner w/ Power Wheels style connector

Spade Connections or Soldered Connections:
Spade connections give you the flexibility of easily changing a single battery from your pack to replace a bad one or change to a different voltage.
Soldered connections give the strongest physical attachment and the best possible electrical connection for reducing amperage draw.

Each battery is:
Length: 5.95"
Width: 3.96"
Height 3.74"
They can be put side-by-side, end-to-end, or standing on edge.


If your battery compartment doesn't have this much room consider using our 24 Volt Dune Racer Conversion Kit instead which separates the 2 batteries into 2 different compartments.Measure for fit. You can also trim your battery compartment if needed or use our Battery Extension Cord to move them to a different location. Be sure to use 24v capable motors.

For vehicles not made by Power Wheels you'll need to change your car's battery connector to the one linked on this page (sold separately).

Easy Installation Instructions:

Download written Battery Charging & Maintenance Instructions

or watch video:

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 26617669119

Discover Niche Categories That Outsell peg perego 24 volt conversion

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 25 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jerry D.
Massapequa, US
★★★★★ 5
Direct replacement on my 95 SeaRay 175
Size: PP67-712 V1
My boat started to have issues with not turning over when I used the ignition switch. Replaced the switch and had no effect. Replaced the solenoid and that fixed the problem. Good price, so I replaced all 3 solenoids (Trim/ starter). Solenoids had all needed hardware (nuts/washers)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 9, 2024
K
Verified Purchase
Kris Nicholas
Natrona Heights, US
★★★★★ 5
They Fixed My Boat
Size: PP67-712 V1
My boat wouldn’t start, and the outdrive wouldn’t go up or down. So I bought three of these solenoids and replaced the starter and both trim motor solenoids/relays. Now it starts right up with no problems and the trim motor is working again also. I have a 2006 Stingray boat.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2022
J
Verified Purchase
Josh T.
Cuba, US
★★★★★ 1
Poor quality
Size: PP67-712 V1
Poor quality. Replaced a starter solenoid on a mercruser 4.3. Right off install it would click but not make a connection to start motor. Confirmed this was the culprit by jumping the terminals. After testing multiple times found it worked a little less than half the time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
J
Verified Purchase
Joe Doakes
Massapequa, US
★★★★★ 5
Ya Just Gotta Have One
Size: 7.2 Surround + 3 HDMI
This is a must-have for in-wall wiring of your surround. I chose this one because I installed a 7.2 system with gold-plated jacks and it worked out great. You can get almost any combination of HDMI, subs/surrounds that you need (5.1, 5.2, 7.1, 7.2 etc). Do your planning on location and wire-routing; get good quality speaker wire and HDMI (high-speed with Audio Return Channel); get the remod-style mounting bracket/box then cut your hole at the same height/level as your electrical outlets and preferably between the same studs as your TV's wire-box so your HDMIs just run straight up to the TV (remember to install the bracket BEFORE you run your wires). When connecting the wires to these terminals, it's best to have 10 to 12 inches of wire coming out of the wall because you need space for your hands to manipulate the wires and nuts on the terminals. If you have a basement with access to the floor below the mounting location, it's best to drill 4 half-inch holes straight up through the bottom plate of the wall and feed your wires up those holes. Tip: If your TV and Surround Receiver are fully compatible you really only need 1 HDMI port on the wall plate, because you can plug your devices into the receiver and just sent the A/V/data to the TV while the audio is returned over the same HDMI.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2016
R
Verified Purchase
Robert E. Hoffman
Carnegie, US
★★★★★ 5
Made a wire nest look fairly neat.
Size: 7.1 Surround + HDMI
My only complaint is that it wasn't available in black as it's in a dark walled home theater. However, it's behind the receiver so it's not real visible. It worked as expected and definitely kept the wiring neater and allowed me to run it through the walls.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2024

recommand products