SKU: 28217038581
indoor plant fly trap

indoor plant fly trap Venus Flytrap – Plant Detectives

Sale price$25.51 Regular price$28.34
Save 10%

Pay in installments of $7.08 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 31 - Sep 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

indoor plant fly trap Venus Flytrap – Plant DetectivesVenus Flytrap (Dionaea muscipula) Venus Flytrap is a compact carnivorous perennial that brings real motion and curiosity to patios, bog planters, and bright indoor setups. The hinged traps snap shut when triggered, turning pest control into a living display that never feels ordinary. It stays small, so it fits easily in containers and can be placed where you can enjoy the details up close. With strong light and mineral free water, it is a reliable

Venus Flytrap (Dionaea muscipula)

Venus Flytrap is a compact carnivorous perennial that brings real motion and curiosity to patios, bog planters, and bright indoor setups. The hinged traps snap shut when triggered, turning pest control into a living display that never feels ordinary. It stays small, so it fits easily in containers and can be placed where you can enjoy the details up close. With strong light and mineral-free water, it is a reliable grower that rewards consistent care year after year.

Distinctive Features

This plant forms a low rosette of modified leaves, each ending in a jaw-like trap edged with toothy spines that interlock when the trap closes. Traps are typically green with red to burgundy coloring inside, with deeper color developing in brighter light. In late spring to early summer it can send up a tall stem of small white flowers above the traps, keeping blooms away from the catching zone. It also needs a winter rest period, during which growth slows and older traps die back before resuming in spring.

Growing Conditions

  • Sun: Full sun to bright light, with several hours of direct sun ideal for strong growth and good trap color.
  • Soil: Use a nutrient-poor, acidic carnivorous plant mix such as peat with perlite or silica sand, and never use fertilized potting soil.
  • Water: Keep the medium consistently moist using rain, distilled, or reverse osmosis water, because minerals from tap water can damage the plant.
  • USDA Zones: USDA Zones 7 to 10, and in colder zones grow in containers so it can be protected during winter dormancy.
  • Temperature: Prefers warm growing-season conditions, but benefits from cool winter dormancy rather than constant indoor warmth.
  • Humidity: Average humidity is acceptable with proper watering, and higher humidity can support cleaner growth in hot weather.

Ideal Uses

  • Focal Point: Display in a small pot or bog bowl at eye level so the traps become a conversation-starting centerpiece.
  • Containers: Grow in dedicated pots to control soil purity and water quality, especially on sunny decks and patios.
  • Bog Gardens: Plant in a prepared bog planter or bog bed where constant moisture and acidic media are easy to maintain.
  • Indoor Bright Spots: Use under strong grow lights or in very bright windows when outdoor sun is not available.
  • Teaching and Curiosity: Keep on hand for a hands-on, living science display that makes plant care feel interactive.

Low Maintenance Care

  • Watering: Never let the pot dry out, and keep a shallow water tray during active growth if conditions are warm and sunny.
  • Feeding: Do not fertilize the soil, and avoid feeding meat, because the plant catches what it needs when grown with enough light.
  • Dormancy: Provide a cool, bright winter rest with reduced watering and expect dieback, then resume normal care as new growth returns.
  • Flower Stalk: If you want maximum trap growth, remove the flower stalk early, because blooming can slow rosette production.
  • Repotting: Repot every 1 to 2 years into fresh carnivorous mix to refresh acidity and improve root health.

Why Choose Venus Flytrap?

  • Unique Display: Offers real movement and a one-of-a-kind look that no typical houseplant can match.
  • Compact Size: Fits easily on windowsills and patios, typically staying about 4 to 6 inches tall with a wider spread.
  • Natural Pest Control: Traps small insects as part of its normal growth cycle when grown in strong light.
  • Container Friendly: Thrives in pots where you can control water quality and media, which is the key to long-term success.
  • Seasonal Rhythm: Returns each year with a clear growth cycle, making care feel predictable once the dormancy habit is understood.

If you want a plant that feels alive in the most literal sense, Venus Flytrap is an easy favorite. Keep it in bright sun, use only mineral-free water, and stick to a proper carnivorous soil mix, and it will perform consistently. Respect its winter dormancy and it becomes a long-term, repeatable success rather than a short-lived novelty.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 28217038581

Discover Niche Categories That Outsell indoor plant fly trap

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
terry
Carnegie, US
★★★★★ 4
Overall, very good for the price.
Size: 13"-32", Style: Single, Size: 13"-32", Style: Single
For the price, I’m pleased with it. Overall, it’s a sturdy stand with quality machining. All the screws went in easily, poorly machined products have crooked holes or bad threads. The mount base comes with 2 types, standard mount for a desktops surface. The other one is for desktops with monitor holes/cabling drilled through them. All the parts are heavy gauge and I encountered no difficulty during assembling. There seems to be a tension screw for the tilt feature. I had to tighten the screw that holds the tilt joint together because out of the box, the monitor flopped forward hard. I had to be mindful while mounting it to the main arm so it wouldn’t slam into my glass desktop. The 2 arms that allow you to move the monitor forwards and back, left and right were a little stiff, I loosened the screw a bit on the main arm, at the pole. That seemed to be all that was required. I tried to loosen the bolt where the 2 arms meet, and it wouldn’t budge. I didn’t force the issue. The instructions were adequate for assembly without covering anything else, like adjusting the tilt bolt for the weight of the monitor. So, while I think this was a good mount for the investment, there are tradeoffs to mention. I’m accustomed to swinging my monitors upward and dusting underneath them. Height is fixed by a screw on this one. I was struggling to install the monitor cables when I realized you can tilt the bottom toward you until the top or the monitor hits the pole, or, until it’s sitting nearly flat like a table. Elevated several inches above the desktop. I consider this a Pro / Con feature. Where the arm ties into the VESA mount, the fit is a little sloppy. It’s not a safety concern but I can wiggle the monitor backwards and forwards at the outer edges “About ¾ inch “before feeling any resistance from the mount. Same goes for tilting. I don’t see this as much of an issue. Normally, I don’t foresee any outside forces acting in the monitor to create a problem. However, there’s room for improvement. The rest of the machining seemed steller. I have multiple computers in different rooms. 32” monitors are used as primary monitors with 32” to 23” as secondaries. I like mine roughly 1” above the desk. That places the top of the monitor at my eye level and the ideal viewing angle. I have fully articulated, hydraulic mounts on most of my monitors. Nice ones for large heavy monitors run $75 to $100 and up. I paid $36 for this one. The……… WALI Monitor Arm Mount for Desk, Single Extra Tall Computer Desk Mount, Monitor Bracket Mount Stand Single, up to 32 inch, 22 lbs (M001XL), Black. Amazon lumps the reviews of similar products together, so I specified which mount I purchased. I’m using this one on a glass desktop, I’m attaching it to the same point I constructed from wood for a different mount. It didn’t lower the monitor low enough either. So, the top of that mounting point is 4” lower than the surface of the glass top. Despite being that low, I didn’t actually need the 32” pole / monitor mount, the 16” model would have worked. There’s still 2” of pipe available above the arm. The 32” was on sale & I didn’t know if the 16” would suffice. The pole is a screw together 2 piece. I unscrewed / removed the other pole as it looked out of place in my dual computer setup. That leaves a hole in the top of the pipe / mount. I wish they included a cap for that. The top pipe has a cap but of a different diameter. I’d like to give it 4 ½ Stars but Amazon won’t let me. I’ve got to go with 4. Height adjustments with heavy monitors and an Allen wrench can present a challenge, it’s the nature of the beast and I won’t give it 5 stars for a few reasons. The sloppy VESA mount and loose tilt motion. No instructions that cover that, or if I was supposed to loosen the arm at the pole to improve motion. I would recommend this mount to others.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2024
J
Verified Purchase
J. Masotti
Draper, US
★★★★★ 5
Excellent mount, especially if you want your monitor mounted higher above the desk.
Size: 13"-32", Style: Single
This is the monitor mount I should have had all along. The extra tall pole allowed me to mount my 32" monitor at the correct height (something I couldn't do with the spring-mount I previously had. It came with good directions, everything needed for install except for a Phillips head screwdriver and a 10mm wrench for one cap nut. The arm that holds the monitor is highly adjustable, and once everything is tightened down, very sturdy. I recommend this one without reservations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 1, 2026
R
Verified Purchase
Ron
Cuba, US
★★★★★ 5
Easy and Functional for 3 Monitor Setup
Size: 13"-27", Style: Triple
Some assembly required. Used this to re-configure my 3 monitor setup. 2 27" monitors across the bottom and a 20-ish" monitor up top. First and foremost, anything bigger than 27" on the bottom two and it will not work. The span was just barely long enough for my application and still allow for any articulation of the monitors. I would prefer to have them angle towards me just a little more, but it works. Assembly was straight-forward. Instructions were pretty clear as far as the pictures go. I didnt actually read the text, but thats pretty much how obvious it is to assemble and mount the monitors. The tubing and clamps feel heavy-duty. With the exception of a drill, drill bits, and phillips head screw driver, they provide the tools and hardware necessary to assemble, mount and adjust the monitors, to include longer screws and offsets for the monitors if required. Installation on my desk went well. I used the through hole option strictly due to the desk not being able to accomodate the clamp. Word of caution... with all three monitors hung on the mount, this thing is HEAVY and all supported by just the main tube. If you use the clamp option, make sure your desktop/tabletop will allow the clamp to fully seat. Otherwise, you run the risk of it slipping loose and you'll be wearing the monitors if you happen to be sitting in front of them when it comes down. Once all the monitors are mounted, the overall setup is surprisingly sturdy considering the size of the main support tube. Yes, it will wobble some, but overall, it works pretty well and once the clamps are locked into place the monitors stay in place. Took a couple of hours for me to get it all set up, but it could be done quicker I'm sure. All in all, me likey!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 13, 2022
M
Verified Purchase
Mark L. S.
Phoenix, US
★★★★★ 5
Good value, well made, easy assembly.
Size: 13"-32", Style: Single
Well made, easy assembly, very versatile and cable management included.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
P
Verified Purchase
Patrick
Carnegie, US
★★★★★ 5
Overdo is what I do
Size: 13"-32", Style: Single
Since my 50" monitor is under the 22lb weight limit, I decided to give this arm a shot. Nobody seems to make an arm for something as big as a 50-inch even if they don't actually weigh that much. So what happened? The arm CAN support that weight and size. The manufacturer did a great job on the materials and it assembles very easily. For a regular monitor, this arm should work great. But the clamp design is not exactly sturdy enough for my bigger screen that exceeds the intended use. Clamped to the table top alone, the pole had a serious and unsafe lean to it. I ended up reinforcing my table with three layers of plywood secured with lag bolts right through the table top. Between the layers of plywood is the table top and a steel beam that the table top sits on. So this is a ridiculously strong base. With that in place, the arm does hold the monitor in the fully retracted position. Extended, there is way too much leverage and the arm starts to lean. So don't do that. It needs to stay totally retracted to the pole. To fit my monitor, I had to get VESA extension wings and those worked fine. This provides the solution I am going to use: angle irons bolted to the wings and running down to the table. I have room to do this. The angle irons will take up most of the weight and let the arm stay vertical and let me move it around. So it will be a three-legged mount instead of one. Eh. It will work fine for me until I come up with something better. Very tempted to drill holes in the clamp base and lag bolt that to the table. Nothing is going to beat that except welding it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2022

recommand products