SKU: 29016899178
aglaonema golden bay care

aglaonema golden bay care Aglaonema 'Golden Bay' – Foliage Factory

Sale price$21.62 Regular price$24.02
Save 10%

Pay in installments of $6.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 19 - Jul 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

aglaonema golden bay care Aglaonema 'Golden Bay' – Foliage FactoryAglaonema 'Golden Bay' Aglaonema 'Golden Bay' is a variegated Chinese evergreen with upright, leafy clumping growth. Green and golden yellow tones run through the leaf surface, and yellow toned petioles continue the colour through the centre of the plant. Firm patterned leaves belong to the normal cultivar appearance. Sudden even yellowing on older leaves, soft stems or persistent wet substrate point to root zone stress. Aglaonema 'Golden Bay' green

Aglaonema 'Golden Bay'

Aglaonema 'Golden Bay' is a variegated Chinese evergreen with upright, leafy clumping growth. Green and golden yellow tones run through the leaf surface, and yellow-toned petioles continue the colour through the centre of the plant.

Firm patterned leaves belong to the normal cultivar appearance. Sudden even yellowing on older leaves, soft stems or persistent wet substrate point to root-zone stress.

Aglaonema 'Golden Bay' green-and-gold pattern

  • Leaf colour: Green and golden areas share the leaf surface.
  • Petioles: Yellow-toned petioles echo the warm colour of the leaves.
  • Pattern: The leaf surface shows a mixed green-and-gold pattern.
  • Habit: Upright petioles and short stems form a leafy clump.
  • Container growth: New leaves rise from the centre and gradually thicken the plant in the pot.
  • Light: Filtered light gives the plant enough brightness while reducing direct-sun scorch on pale sections.

Aglaonema 'Golden Bay' colour and root-zone clues

A firm leaf with green-and-gold patterning is normal for Aglaonema 'Golden Bay'. Stress yellowing looks more even, often starting on older leaves while the substrate stays wet or the base of the plant softens.

Because the plant grows as a dense clump, the root zone needs air as well as moisture. A compact pot with an airy mix is safer than a large pot filled with heavy substrate, especially in cooler indoor conditions.

Aglaonema 'Golden Bay' indoor care

  • Light: Place it in bright filtered to medium indirect light. Direct sun can scorch yellow or cream-toned sections.
  • Water: Water after the upper layer of substrate has started to dry, then let excess water drain fully.
  • Substrate: Use a loose, moisture-retentive mix that does not collapse around the roots.
  • Temperature: Keep it warm and stable. Cold roots and wet substrate can cause quick decline.
  • Humidity: Moderate indoor humidity is suitable, with higher humidity reducing the chance of dry new leaf edges.
  • Cleaning: Wipe leaves gently so mineral marks and dust do not dull the green-and-gold pattern.

Aglaonema 'Golden Bay' care signals

  • Patterned leaves: Firm leaves with green-and-gold colouring are normal for this cultivar.
  • Stress yellowing: Sudden, even yellowing on older leaves often points to watering or root-zone problems.
  • Soft stems: Wet substrate and cool conditions can damage the base of the plant.
  • Scorched areas: Direct sun can brown pale yellow or cream-toned sections.
  • Brown tips: Dry air, salt buildup or irregular watering can mark the leaf edges.

Aglaonema 'Golden Bay' safety

Aglaonema 'Golden Bay' should be kept away from pets and small children. Like other Aglaonema, it contains calcium oxalate crystals that can irritate the mouth, throat, skin or eyes.

Aglaonema 'Golden Bay' botanical note

Aglaonema 'Golden Bay' is a cultivated interspecific Aglaonema hybrid. Aglaonema belongs to Araceae, and the genus name comes from Greek roots meaning bright or clear and thread, referring to floral structure.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 29016899178

Discover Niche Categories That Outsell aglaonema golden bay care

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 9 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Joseph E. Brackman
Charlottesville, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Boise, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
C
Verified Purchase
Colauhu
Fort Morgan, US
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
G
Verified Purchase
Gigi
Belleville, US
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
M
Verified Purchase
Michelle bullard
West Palm Beach, US
★★★★★ 5
Stable and easy to assemble
I used these to support a heavy piece of countertop would to create a side table. Looks great and holds steady.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2023

recommand products