Pay in installments of $6.89 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 21 - Sep 26
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
how to clean uppababy vista v2 UPPAbaby VISTA V2 + MESA MAX Travel SystemVista V2. With Mesa V2. The VISTA V2s intuitive design allows for multiple configurations, making transporting a second and third child a breeze all while strolling like a single. The included MESA MESA MAX infant car seat attaches directly to the VISTA delivering a Performance Travel System that is the ultimate in portability and safety. No need to sacrifice performance for convenience. Whether you always roll with neutrals or prefer a pop of color,
Vista V2. With Mesa V2.
The VISTA V2’s intuitive design allows for multiple configurations, making transporting a second and third child a breeze — all while strolling like a single. The included MESA MESA MAX infant car seat attaches directly to the VISTA delivering a Performance Travel System that is the ultimate in portability and safety. No need to sacrifice performance for convenience.
Whether you always roll with neutrals or prefer a pop of color, there’s a VISTA V2 to fit your style. Choose from a wide range of colors, including new innovative textile options with stylish REACH-certified leather accents. Don’t let the latest refinements fool you though – these VISTAs are the same hardworking strollers parents love, only a dash more sleek.
Vista V2 Updates
- NEW Colors! Fashions feature color blocking, texture and standout shades.
- More Comfort for Growing Toddlers: A higher back and deeper footrest on the toddler seat provide added comfort for growing children.
- More Sun Protection and Ventilation: Extended canopy on toddler seat include zip out fabric for even more shade and open a mesh peek-a-boo window. A second flap in the front of the canopy can be opened for additional ventilation.
- Hassle-Free Harness: The no-rethread harness adjusts in a singular motion for added ease while providing a precise fit for growing babies.
- Improved All-Wheel Suspension: Enjoy a softer ride pushing one child (or three!) over any ground surface thanks to a new spring-action, all-wheel suspension and softer tires. Green indicators provide a visual signal when the wheels are locked and unlocked
- Storage Basket: Sleeker design and now has storage pockets for keeping accessories like your rain shield or car seat adapters easily accessible.
- UPPAbaby logo is now embedded on a leather tab attached on the canopy.
Frame/Seat Features
- Includes both Bassinet and Toddler Seat – completely interchangeable and requires no fabric swapping
- Performance Travel System with the included MESA MAX Infant Car Seat– direct attachment, no adapters necessary.
- Allows you to transport up to 3 children without growing wider with RumbleSeat and PiggyBack Board (sold separately)
- Expandable seat selections that allow for two rear and forward facing seats; reclining toddler seats, two Mesa infant car seats, two bassinets, and countless other combinations
- Genuine leather handlebar/bumper bar covers on all VISTA colors. Full grain cow hide leather available in brown and black color. It's REACH certified with no chemicals used in the tanning process. The handlebars are hand stitched onto stroller and will get darker and softer over time. It's also replaceable if it gets ruined.
- Frame combines aluminum with magnesium for optimal lightweight and durable performance
- Carbon frame is powder coated, it's matte and less susceptible to scratching
- Full size reversible toddler seat
- One-handed, multi-position recline
- 5-point no-rethread adjustable harness
- UPF 50+ sunshade with a soft, wrinkle-resistant material
- Extended canopy on toddler seat include zip out fabric for even more shade
- Height adjustable canopy to accommodate growing children
- Canopy locks to keep it in place when you slide it up and down
- Mesh peek-a-boo window in canopy extension
- Flap in the front of the canopy can be opened for ventilation
- Shock-absorbing front & rear suspension
- Solid polyurethane tires for that classic effortless push
- Smooth rolling 'no-flat' foam and rubber wheels
- One-step fold, with or without seat attached
- Stands on its own when folded
- Lockable front swivel wheels
- Rear wheel brakes
- One-button telescoping handlebar
- One-hand release, pivoting bumper bar for easy loading
- An easy to clean, single piece bumper bar
- X-Large easy-access basket with 30 lb. weight limit
- Fabrics are removable and washable
- All-weather protection with included Toddler Seat Rain Shield and Bug Shield
Bassinet Features
- Large sleeping area
- Zip-out, water-repellant inner liner and boot cover are easy to remove and clean keeping baby’s sleeping surface dry and comfortable
- The back of the Bassinet canopy unzips for additional airflow, and the pop-out sunshade shields your child from harmful UV rays, keeping baby cool and comfortable
- The perforated mattress pad and vented base allow for added breathability creating a truly comfortable and safe resting space for your baby
- Depth and ventilation provide a safe overnight sleeping solution
- Snaps into the Bassinet Stand for a secure and elevated fixture for baby to rest easy (sold separately)
- Includes Bassinet Bug Shield and Storage Bag
MESA MAX
-
Robust infant insert designed to provide better fit and body positioning for babies approximately 4–11 lbs
-
4th anti-rebound handle position for increased safety in rebound and rear-impact collisions when installing without the base
-
European Routing for a more secure installation when installing without the base
-
Side ventilation for airflow
-
Belt path easily holds harness straps out of the way
-
Direct attachment to VISTA and CRUZ strollers; convenient adapters available for the MINU and RIDGE strollers
-
Carry handle with stroller release button
-
All fashions are Fire Retardant Free through our DUALTECH and PURETECH fabrics
- GREENGUARD® GOLD Certified to support healthier air quality and low chemical emissions
MESA MAX BASE
- Included base with load leg for additional stability and energy absorption
- Anti-rebound+ panel for increased safety in rebound and rear-impact collisions
- SMARTSecure® System with red-to-green visual indicator installs in seconds
- Built-in lock off for secure seatbelt installation
- Bubble level indicators on both sides to aid in getting correct angle during installation
- Streamlined, low-profile base with finished bottom
- Four-position adjustable foot to accommodate various car seat angles
Specifications
- VISTA V2
- Open dimensions: 36”L x 25.7”W x 39.5”H
- Folded with seat attached: 17.3”L x 25.7”W x 33.3”H
- Folded without seat attached: 13″ L x 25.7″ W x 32″ H
- Weight of Frame + Seat: 27 lbs
- Weight of Frame: 20 lbs
- Weight of Seat: 7 lbs
- Weight of Bassinet: 8.8 lbs
- Bassinet suitable for infants up to 20 lbs, and 25" long
- Toddler Seat suitable from 3 months to 50 lbs
- MESA MAX
- Approximately 0–1 years
- Suitable from 4–35 lbs, or up to 32″ in height, whichever comes first
- Included infant insert suitable from 4–11 lbs
- Car Seat dimensions: 17″W x 25.8″L x 23″H
- Car Seat on base dimensions: 17″W x 28″L x 25″H
- Car Seat base-only dimensions: 14.5″W x 21.3″L x 10.3″H
- True weight:
- Car Seat 9.9 lbs
- Base 12.6 lbs
What's Included: Frame + Basket, Wheels, Bassinet, Bassinet Bug Shield, Bassinet Storage Bag, Toddler Seat + Canopy, Toddler Seat Rain Shield, Toddler Seat Bug Shield, Bumper Bar, MESA MAX Infant car seat, car seat base and infant insert.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 25 reviews
Sort
Product Reviews
★★★★★ 5
Great Stuff
Size: 120 ML
Product is good, Easy to spread for the most part. The only complaint I would give it is that the applicators do not hole up after several applications, I would suggest using a microfiber cloth to apply.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Restored My Trim Instantly
Size: 120 ML
I used this plastic restorer on the faded trim around my SUV, and the difference was immediate. The dull gray plastic turned back to a rich black color within minutes. It spreads evenly and doesn’t leave greasy streaks behind. After a few weeks and several rainy days, the finish still looks great. My car honestly looks years newer now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 5
Great result, exceptional value, and easy, forgiving application.
Size: TRIM COAT KIT
I am thoroughly pleased with the results of this product, and the application was easier than I expected. Outstanding stuff. I am writing a longer review in case it helps people who are unsure about a "once and done" product that calls itself permanent. It's not hard to apply. It is forgiving and there's time to even it out. But here are some things to anticipate.
My use case:
I used Cerakote to restore the plastic trim on a used 2014 black Dodge Challenger that had been repainted but the plastic trim was original and it had been kept outside by the prior owner, so the contrast between the new paint and faded trim was noticeable. The trim was originally a deep, dark gray (it is never as black as the paint). It had faded to a medium-gray in many places: running boards on the side beneath the door, below the read bumper (which were also somewhat worn from debris), around the tail lights, and the plastic piece beneath the windshield wipers between the windshield and the hood. These were all looking weathered. The trim was very oxidized in some places, chalky grey near the hood and around the back bumper. The plastic around the tail lights also had light streaks in it from where water drains down from the trunk.
What else I tried before I tried Cerakote:
I got middling results from Mother's Back to Black. It looked somewhat better for a week or two, and then it went back to looking as before. Not impressed.
I got a tip online to try rubbing the plastic trim with a melamine magic eraser, so I did that next, and this made a significant difference. Melamine is abrasive, so be careful if you do this on your trim. I went gently, up-and-down, side-to-side and in small circles, by hand, with gentle pressure like one would with a polishing compound. By removing the oxidation, the plastic was a few shades darker in the worst spots and the streaking on the rear tail light piece was gone. The rough spots on the trim at the bottom of the car and around the wheels looked somewhat better. But it certainly did not "like new."
Cerakote experience:
I decided to give Cerakote a try based on the video and good reviews. Bam! Back to factory-like deep dark gray. I wish I had taken pictures. It's incredible. Fully satisfied!
I had already washed the trim with Dawn dish soap. I started with the trim bone dry. You are warned everywhere that water droplets will ruin the result, so don't expect to do this process right after you wash the car unless you like to live dangerously and have compressed air to spray cracks and crevices.
I was worried that application would be streaky if I didn't do it right. Not so. It is forgiving. Here's what I learned.
1) The first 20% of what you'll get out of the packet goes on heavy with the lightest touch. One packet goes a long way. The next 60% is the "normal" application. This goes on the easiest. You can really milk the last drop out of each towelette, but I didn't because the last 20% of what you can get out of it by rubbing it really hard comes out very light and is not worth the uneven application unless you have some random area you don't care much about and want to use the remainder for that. I only used 5 packets to do the whole car.
When you start a new packet, the beginning is where you might want to go back later and even it out once the application gets more normal. Or better, start a new packet on a big section to spread it around well and then move to smaller trim when the towelette is less fresh.
2) You've got time to work with it and make corrections. It stayed liquid like water for at least 20 minutes in my conditions: about 80 degrees, not very humid, indirect sunlight on an 80 degree car. Don't apply in direct sun or on a hot car. The product then gets sticky as it cures, but you can still work with it during the sticky time, rubbing it in and spreading it evenly with the towelette. I did not use a microfiber to "knock down" heavy spots. I just came back around with the towelette. I think a dry microfiber might pull off too much product. When it is half-cured, it is sticky and you can buff it with the towelette at this stage to further flatten and even things out. Work in sections, one piece of trim at a time.
3) Overlaps won't show as long as you rub it all in thoroughly. I tried the overlapping parallel passes method that they recommend, and this works pretty well. I was worried that I might get a "double heavy" streak where the passes overlap but this not so unless the towelette is fresh, but this is fixable. You can do a pretty natural, casual back-and-forth motion for the most part and it comes out fine. This is NOT a super-finicky product. I made a second or third back-and-forth pass in a few areas, and used circular motion in some places where the trim was textured or a little rough from wear, and it all looked even in the end. Just rub it down into the plastic and even out the sheen while it is uncured and it's good.
4) It cures like you see it when it's still wet. It doesn't lighten up very much as it cures. It just looks a little less wet. So get it right by eye when it is wet and that's pretty much what you will still have in an hour when it is cured.
5) Don't miss a spot! You'll see it for sure if you do because the different is so dramatic. And a "second coat" is not easy or recommended. This is the only once-and-done part that you want to get right, and you have plenty of cure time to be thorough.
6) Use the folded corner of the towelette to get into small corners and edges, like where the trim meets the paint or has an inside corner or some little nook. A fresh towelette is great for getting into small areas because a feather touch applies plenty of product when the towelette is fresh.
The trim now looks amazing and I am entirely satisfied. I will use Cerakote on my other vehicles. The only minor con is a strong ammonia smell when you are up close to it while it is wet. No smell once it is cured. I would definitely wear the recommended gloves while applying. As others say, you will probably drop that towelette on the ground. It's slippery when wet. Keep it folded in quarters as it comes for ease of application. Turn to a new quarter once a side gets dirty or dry and fold it inside out for four more quarters to use.
Bonus, but off-label -- at your own risk:
The product is not intended for the soft rubber around the windows, but I tried it there too, and it looks amazing. All I did was wash the rubber with dish soap like the trim, and I rubbed it a few times with a wet microfiber cloth to get the superficial layer of oxidized rubber off. Then I applied Cerakote. It looks great.
The rubber used to be blotchy and faded. The microfiber evened this out a little. I would not use melamine on the rubber -- this made it look worse in a test section. The Cerakote made it look great: jet black, much shiner, and much more even looking. Not quite "brand new" but far better than I thought possible. I thought I might need to replace the rubber. Now it's looking great next to the jet-black new paint. This afterthought use alone was worth the money.
Can you apply a second coat the next day?
They don't say you can, and I don't recommend it. This is meant to be one-shot, which is why you should check to make sure you don't miss any spots.
I had two areas where I tried a second coat the next day. The first was on the plastic trim between the windshield and the hood. I didn't rub this trim much with melamine beforehand so there was a lighter area (light grey originally, the worst spot) that didn't get as black as the other sections so I did it again, which helped a little, but not much. I didn't wash this area with soap beforehand because I wasn't intending to fix it until I got going. Once you put things back to black you will start noticing other faded things more.
Likewise, I did a second coat on the very top of the soft rubber at the bottom of the windows (the part which faces upward and thus gets the most sun), it wasn't as shiny as the other parts, so I went over that section gently again the next day with a fresh towelette.
As soon as I did it, I thought it was a mistake. This didn't go well initially because the cured coating is very hydrophobic so the new, wet, Cerakote of the second coat goes on smooth initially and then "puddles up" into little droplets a few minutes later. It doesn't want to stick to the first coat. I thought I had messed it up, but I let it cure a little until the sticky phase, and spread it out again with the towelette. It stayed that time but gathered back a little into some streaks. I spread it once more a few minutes later and it looked good. It stayed even. It looks just fine a few days later, so I think it cured OK.
I hope this product last for months as advertised. Even if it doesn't I would totally do it again because the results are superior, I still have half my towelettes left, and the product is not expensive. 10/10 would do again and will recommend to everyone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 25, 2025
★★★★★ 5
Easy to use, amazing results
Size: TRIM COAT KIT
This is an awesome product that is easy to use and has amazing results. My plastic trim never looked so good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
★★★★★ 5
Made My Bumper Look Brand New Again
Size: TRIM COAT KIT, Size: TRIM COAT KIT
I used this on the plastic trim and bumper on my truck, and I’m honestly impressed with how it turned out. The faded areas came back to a deep, rich black and really cleaned up the whole look of the rear end.
I prepped everything the right way by washing it first with an all purpose cleaner, then wiping it down with 91% alcohol. I also taped off the surrounding paint and chrome just to be safe. After that, the application was simple and went on smooth without any streaks or blotchy spots.
The difference was immediate. What used to look dull and worn now looks factory-fresh again. It also seems to bond well and not just sit on the surface like some cheaper products I’ve tried before.
Overall, this was easy to use, gave great results, and made a noticeable improvement. I would definitely use it again on other trim pieces.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026