SKU: 33258114911
zz plant in the wild

zz plant in the wild ZZ Plant Zamioculcas Zamiifolia – Wild Lark

Sale price$20.61 Regular price$22.90
Save 10%

Pay in installments of $5.72 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 21 - Jul 26

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

zz plant in the wild ZZ Plant Zamioculcas Zamiifolia – Wild LarkThe ZZ Plant, scientifically known as Zamioculcas zamiifolia, is a popular and attractive houseplant native to Eastern Africa. It is highly valued for its glossy, deep green foliage, low maintenance requirements, and ability to thrive in a variety of indoor environments. The ZZ Plant is also known for its exceptional air purifying qualities, making it a great addition to homes and offices alike. To provide optimal care for your ZZ Plant, follow these

The ZZ Plant, scientifically known as Zamioculcas zamiifolia, is a popular and attractive houseplant native to Eastern Africa. It is highly valued for its glossy, deep green foliage, low maintenance requirements, and ability to thrive in a variety of indoor environments. The ZZ Plant is also known for its exceptional air-purifying qualities, making it a great addition to homes and offices alike.

To provide optimal care for your ZZ Plant, follow these guidelines:

  1. Light: ZZ Plants can adapt to a wide range of light conditions, from low to bright indirect light. However, they thrive best in bright, indirect light. Avoid placing your plant in direct sunlight, as this can scorch its leaves.

  2. Water: ZZ Plants are drought-tolerant and should be watered sparingly. Allow the soil to dry out completely between waterings to prevent overwatering and root rot. Approximately once every 2-3 weeks should suffice, but adjust the frequency depending on the season and environment.

  3. Soil: Use a well-draining potting mix that contains a blend of peat, perlite, and coarse sand. This will allow excess water to drain away from the roots and help prevent rot.

  4. Humidity: ZZ Plants can tolerate average household humidity levels but will appreciate higher humidity if possible. You can increase humidity by placing a tray filled with water and pebbles beneath the plant or by using a humidifier.

  5. Fertilizer: Fertilize your ZZ Plant sparingly, using a balanced liquid houseplant fertilizer diluted to half strength. Fertilize every 4-6 weeks during the growing season (spring and summer) and avoid fertilizing in the winter months.

  6. Temperature: ZZ Plants thrive in temperatures ranging from 65-75°F (18-24°C). Keep your plant away from cold drafts and extreme temperature fluctuations.

  7. Pruning: Prune your ZZ Plant occasionally to maintain its shape and remove any yellowing or damaged leaves. Use clean, sharp pruning shears to prevent the spread of disease.

  8. Repotting: ZZ Plants are slow-growing and typically need repotting only every 2-3 years. Choose a pot that is 1-2 inches larger in diameter than the current pot and ensure it has drainage holes.

According to the ASPCA's website, the ZZ Plant is considered toxic to pets, including cats and dogs. The plant contains calcium oxalate crystals, which can cause irritation in the mouth, throat, and gastrointestinal tract if ingested. Symptoms may include drooling, vomiting, and difficulty swallowing. If you have pets at home, it's essential to keep your ZZ Plant out of their reach to ensure their safety.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 33258114911

Discover Niche Categories That Outsell zz plant in the wild

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Whiting, US
★★★★★ 5
Quality
Quality item. Using a butcher block on top to make a desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
A
Verified Purchase
abur
Cuba, US
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together. Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there. This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
N
Verified Purchase
Nancy
Draper, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Lake Worth, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Grantham, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020

recommand products