Pay in installments of $6.42 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 15 - Oct 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
watering mats for indoor plants AquaMat Capillary Mat Irrigation Systems — Bottom-Up WateringTake the guesswork out of watering with AquaMat Capillary Mat Kits designed for consistent, bottom up hydration that accelerates vegetative growth and increases soil aeration. Each kit is fully customizable. Choose your mat size, irrigation control method, and container option. Mat Size Options 24 ft 33 ft 44 ft 48 ft Irrigation Control Options Preset 5" Blumat Sensor Placed into a pilot container filled with soil, this sensor regulates water flow
Take the guesswork out of watering with AquaMat Capillary Mat Kits — designed for consistent, bottom-up hydration that accelerates vegetative growth and increases soil aeration. Each kit is fully customizable. Choose your mat size, irrigation control method, and container option.
Mat Size Options ＋
- 2×4 ft
- 3×3 ft
- 4×4 ft
- 4×8 ft
Irrigation Control Options ＋
- Preset 5" Blumat Sensor — Placed into a pilot container filled with soil, this sensor regulates water flow into the mat based on soil moisture levels. Best suited for pots 4" or larger.
- Surface-Mounted Blumat — A bell-shaped ceramic base that attaches to a Blumat sensor and sits directly on the mat. Fine-tune moisture levels for uniform watering across the surface. Ideal for cell trays or small containers.
- No Sensor — For manual watering. No fittings included.
Container Options ＋
- Grassroots 1-Gallon Bottomless Sleeves — Maximize aeration and allow roots to grow through the open base into the mat. Ideal for easy transplanting. (10 for 2×4, 20 for 3×3 or 4×4, 40 for 4×8)
- Non-Woven Nursery Pots — Biodegradable, tear-resistant fabric bags that allow roots to grow through the sides and bottom for easy transplanting. (50 with any mat size)
- None — Use your own containers. Any pot with holes flush to the bottom will work.
What You'll Also Need ＋
This kit covers the mat and containers. To complete your system you'll also need an 8mm supply line and a water source:
- 8mm Supply Line — runs from your water source to the sensor. See our 8mm SuperFlex Supply Line Kits.
- Gravity Reservoir — our complete 5-Gallon Deluxe Bucket Kit, or use our 8mm Bulkhead Fittings with any container of your choosing.
- Pressurized Source (hose bib or pump) — requires a Pressure Reducer to bring pressure down to the safe Blumat range of 7–15 PSI.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 30 reviews
Sort
Product Reviews
★★★★★ 5
It works as expected
Size: 8.3" x 9.3" x 1.3"
Great. It does block air flow by a bit, but it is ok, if you don't need strong air blowing your face at maximum setting all the time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 14, 2025
★★★★★ 5
Great cabin filter for 2019 Acura RDX
Size: 8.3" x 9.3" x 1.3"
When I have my car serviced at the Acura dealership, they routinely recommend that the cabin filter be replaced. As we all know, a dealership is going to charge an arm and a leg for a basic service. Therefore, I have been replacing the cabin air filter myself for the past few years. I like BOSCH products and when I found this filter on Amazon, I knew that was the one to purchase for my 2019 Acura RDX. The filter fits perfectly in its location in the glove box. It literally takes less than five minutes to swap out the old filter for the new. I will continue to use this product while I have the RDX.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 30, 2025
★★★★★ 5
Perfect fit, easy installation.
Size: 8.3" x 9.3" x 1.3"
This part fits perfectly. Directional flow is printed on the part however you need to confirm which way air flows in the actual air box. The easiest test is to run the a/c with the filter out, wet a finger, and stick in in the air box to see which side the air blows cold. Then just install this part in the air flow direction as printed on the part. I have not noticed a difference in air quality yet, however I imagine being a HEPA filter, this will do wonders keeping pollen out of the car. Installed this in a 2011 Honda CR-Z. Easy installation. Part looks high quality which is fitting for Bosch.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 4
Great filter, but doesn't fit 2013 Honda Fit without modification
Size: 8.3" x 9.3" x 1.3"
Right off the bat: I don't have any airflow problems with this filter. It works great, the air is noticeably cleaner, and airflow has not been meaningfully reduced. However, it doesn't fit my air filter holder very well.
The ' air filter holder' (a plastic tray that slides horizontally into the air flow system) has two plastic fringes on either side of the tray, which each have two small notches in them, a few inches apart from one another. This appears to act as a sort of 'key' by which you can gauge you are putting the filter in with the correct alignment. On an OEM filter, the slots line up with two strips of material that stretch across the length of the filter, which themselves rest within the slots. However, the slots don't line up with the strips on this filter. I had to cut the fringes so that the slots in them are wider, so the strips would fit in them. Without doing this, the filter wouldn't press down into the tray.
Having done that, and the filter now rests flush in the tray, there are still marginal gaps around the perimeter of the filter. It's a millimeter or two too small for the tray, so there is some airflow around the filter. This could be rectified by wrapping insulation tape or something around the edge of the filter, or could be ignored if you're not super picky. I haven't added any wrapping to get an airtight seal, and even with that gap I still noticed that the air is way better.
So ultimately, it didn't fit exactly, but it fits 90% of the way and, with some finagling, is a superior filter by any other measure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2018
★★★★★ 5
Don't overlook this important bit of maintenance
Size: 8.3" x 9.3" x 1.3"
Cabin air filters get dirty and gross quicker than you realize. I recommend changing them twice a year. Bosch is a quality brand, very happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026