SKU: 44462612472
japanese maple potting mix

japanese maple potting mix Japanese Maple Grow Kit | Made in USA

Sale price$23.56 Regular price$26.18
Save 10%

Pay in installments of $6.54 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

japanese maple potting mix Japanese Maple Grow Kit | Made in USAGrow Your Own Japanese Maple from Seed The Seeds In A Cup Japanese Maple Grow Kit is a complete seed to sprout system for growing Acer palmatum at home. Curated by Kevin Bruce, expert horticulturalist, this kit gives you everything you need to grow your own japanese maple from a single seed. A rewarding long term growing project for patient gardeners, nature lovers, and families who want to watch something extraordinary take root. Rated Difficulty

Grow Your Own Japanese Maple from Seed

The Seeds In A Cup® Japanese Maple Grow Kit is a complete seed-to-sprout system for growing Acer palmatum at home. Curated by Kevin Bruce, expert horticulturalist, this kit gives you everything you need to grow your own japanese maple from a single seed. A rewarding long-term growing project for patient gardeners, nature lovers, and families who want to watch something extraordinary take root.

Rated Difficulty Level 1 (Beginner) — no prior gardening experience needed. Germination typically occurs in 30-120 days under proper conditions. Plants can reach 15-25 feet at maturity and thrive in partial shade to full sun (4-6 hours daily).

Note from Kevin Bruce, Horticulturalist: Acer palmatum seeds require cold stratification (a period of cold-moist treatment that mimics winter) to break dormancy before germination. Full stratification instructions are included in your kit.

Why Growers Trust Seeds In A Cup®

  • 100% recyclable eco-friendly packaging
  • Hand-assembled in Cleveland, Ohio, USA
  • High-germination non-GMO batch-tested seeds
  • All-in-one kit: seeds, real soil, planter & instructions
  • 100% Growth Guarantee — seeds don't sprout? We replace them free

What's Included in Your Japanese Maple Grow Kit

  • Premium Non-GMO Acer palmatum Seeds — batch-tested for high germination rates (2-7+ Seeds)
  • Real Loose Potting Soil — nutrient-rich growing medium, not compressed coir discs
  • Recyclable Planter with Lid — clear lid doubles as a humidity dome for germination and a saucer for drainage
  • Step-by-Step Growing Instructions — detailed care guide from seed to transplant, written by Kevin Bruce

No extra supplies needed. Just add water and sunlight.

How to Grow Japanese Maple from Seed: Quick-Start Guide

  1. Stratify (if required): Follow the cold stratification instructions included in your kit before planting.
  2. Plant: Fill your planter with the included soil. Plant japanese maple seeds at the depth indicated in your instructions. Mist with water and place the clear lid on top.
  3. Germinate: Keep soil warm and moist. Seeds typically sprout in 30-120 days. Remove lid once seedlings emerge.
  4. Grow: Place in partial shade to full sun (4-6 hours daily). Water when the top inch of soil feels dry. Follow the included care guide for feeding and transplant timing.

Japanese Maple Plant Profile

Scientific Name Acer palmatum
Plant Type Deciduous Ornamental Tree
Difficulty Level Beginner
Germination Time 30-90 days at 33-40F (cold stratification)
Mature Height 15-25 feet
Sunlight Needs Partial Shade to Full Sun (4-6 hours daily)
USDA Hardiness Zones 5-8 (Outdoor); All Zones (Indoor)
Planting Season Fall (for stratification)
Cold Stratification Required (instructions included)
Seeds Included 2-7+ Seeds

Frequently Asked Questions

What is included in the Seeds In A Cup Japanese Maple Grow Kit?

Every kit includes premium non-GMO Acer palmatum seeds, real loose nutrient-rich potting soil, a recyclable planter with clear humidity lid, and detailed growing instructions written by expert horticulturalist Kevin Bruce. No additional supplies are needed.

How long does japanese maple take to grow from seed?

Acer palmatum seeds typically germinate in 30-120 days under proper conditions (30-90 days at 33-40F (cold stratification)). Plants can reach 15-25 feet at full maturity. Growing conditions including light, temperature, and watering will affect growth rate.

Can I grow japanese maple indoors?

Yes! This kit is designed for indoor growing on windowsills, countertops, and in apartments. Japanese Maple needs partial shade to full sun (4-6 hours daily) for best results. A south-facing window is ideal. Grow lights can supplement natural light in lower-light spaces.

Where are Seeds In A Cup kits made?

Every Seeds In A Cup® kit is hand-assembled and ships from our headquarters in Cleveland, Ohio, USA. We are a Made in USA company using American-sourced materials and supporting Midwestern agriculture standards.

What if my seeds don't sprout?

We stand behind every kit with our 100% Growth Guarantee. If your seeds do not germinate, contact our support team and we will send you replacement seeds at no charge. We batch-test all seeds in Cleveland to ensure high germination rates.

About Seeds In A Cup®

Seeds In A Cup® provides complete seed starter kits designed for first-time growers to experienced gardeners. Every kit combines premium loose potting soil, high-germination non-GMO seeds, and clear instructions in 100% recyclable packaging. Hand-assembled in Cleveland, Ohio with a 100% Growth Guarantee.

Expert Guidance: All growing instructions and care guides are developed by Kevin Bruce, expert horticulturalist, ensuring accurate and reliable plant care information you can trust.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 44462612472

Discover Niche Categories That Outsell japanese maple potting mix

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mark Kadrich
Battle Creek, US
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
J
Verified Purchase
Josh
Omaha, US
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
W
Verified Purchase
william scott
Chelsea, US
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
M
Verified Purchase
Mike
Port Orchard, US
★★★★★ 5
Great sound mat for the price!
Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
P
Verified Purchase
Paul
Draper, US
★★★★★ 5
Excellent sound deadening mats
Style: 80 mil 36 sqft, Style: 80 mil 36 sqft
Purchased these for a 2020 Lexus RX350 due to the hollow sound of the car doors when shutting. They sounded cheap. The mats are super sticky and I applied them when the doors were hot from sitting in the sun. They alubutyl sticks like crazy and the end result was perfect. Now I have solid sounding doors. Good quality product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026

recommand products