SKU: 45975949467
ruffled philodendron

ruffled philodendron Philodendron scandens ssp. oxycardium 'Frilly Philly'

Sale price$23.45 Regular price$26.06
Save 10%

Pay in installments of $6.51 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 24 - Jul 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ruffled philodendron Philodendron scandens ssp. oxycardium 'Frilly Philly'Philodendron scandens ssp. oxycardium Frilly Philly is a stunning and rare vining plant with uniquely ruffled, heart shaped leaves that set it apart from other Philodendrons. Its fast growing, trailing nature makes it an excellent choice for bioactive enclosures, where it provides lush coverage, increased humidity retention, and climbing foliage. This low maintenance, adaptable plant thrives in terrariums, vivariums, and paludariums, adding a touch of

Philodendron scandens ssp. oxycardium ‘Frilly Philly’ is a stunning and rare vining plant with uniquely ruffled, heart-shaped leaves that set it apart from other Philodendrons. Its fast-growing, trailing nature makes it an excellent choice for bioactive enclosures, where it provides lush coverage, increased humidity retention, and climbing foliage. This low-maintenance, adaptable plant thrives in terrariums, vivariums, and paludariums, adding a touch of wild, tropical beauty to any setup.

Care Instructions

LIGHT. Prefers bright, indirect light but can tolerate lower light levels. However, brighter light encourages stronger growth and more pronounced frilly foliage. In bioactive setups, position it near a light source but avoid direct sun exposure, which can scorch its delicate leaves.

SOIL. Thrives in a well-draining, airy substrate. A mix of coconut coir, orchid bark, and perlite mimics its natural tropical habitat, ensuring good aeration and moisture balance. In bioactive enclosures, this soil type also supports decomposers like isopods and springtails, creating a healthy micro-ecosystem.

WATERING. Keep the soil consistently moist but not soggy. Allow the top 1-2 inches of soil to dry out before watering again. In a bioactive setup, springtails and isopods help regulate moisture levels, preventing overwatering issues and root rot.

HUMIDITY. Thrives in high humidity (above 60%), making it ideal for bioactive environments. If humidity levels drop too low, leaves may become dry and crispy. Misting or using a water dish in the enclosure can help maintain optimal conditions.

TEMPERATURE. Prefers warm temperatures between 65°F and 85°F (18°C to 29°C). Avoid exposure to cold drafts or temperatures below 55°F (13°C), as it may cause growth to slow or leaves to drop.

FERTILIZATION. Feed with a diluted balanced liquid fertilizer every 4-6 weeks during the growing season (spring and summer). In bioactive setups, organic fertilizers like Mealworm Frass provide slow-release nutrients for healthy, robust growth. Reduce feeding in winter, as growth naturally slows.

Cohabitation with Bioactive Organisms

ISOPODS. These beneficial decomposers break down plant debris and uneaten organic matter, enriching the soil with nutrients while preventing compaction, which supports strong root development.

SPRINGTAILS. Essential for mold prevention, springtails thrive in the humid, organic-rich environment that Philodendron ‘Frilly Philly’ loves, ensuring a healthy and balanced substrate.

Soil and Maintenance Tips

SUBSTRATE. A loose, well-draining mix of coconut coir, orchid bark, and perlite ensures healthy root development while preventing waterlogging. Adding a thin layer of activated charcoal at the bottom can help with filtration and odor control in bioactive setups.

HUMIDITY CONTROL. Misting the enclosure, incorporating a water feature, or keeping a moisture-retaining substrate ensures optimal humidity levels. Springtails and isopods help regulate excess moisture and maintain a stable microenvironment.

TRIMMING. Regular pruning encourages bushier growth and prevents the vines from becoming too leggy. Cuttings are easy to propagate in water or directly in soil, making it simple to expand your collection.

PEST CONTROL. Naturally resistant to most pests, but in drier conditions, it may attract spider mites or aphids. The presence of isopods and springtails helps control pest populations naturally, keeping your plant healthy.


With its unique frilly foliage and easy-care nature, Philodendron scandens ssp. oxycardium ‘Frilly Philly’ is a perfect addition to bioactive setups. Its trailing growth enhances terrariums, vivariums, and paludariums, while its natural affinity for high humidity makes it an ideal plant for tropical ecosystems. By providing the right light, moisture, and substrate, you’ll support strong, healthy growth, ensuring this stunning Philodendron flourishes in your enclosure.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 45975949467

Discover Niche Categories That Outsell ruffled philodendron

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Movie Fan
Pawtucket, US
★★★★★ 3
Nice Edger as long as the blade doesn't come loose -- and it will come loose, repeatedly!
Probably could've/should've rated this 2 stars yet it works well when it works. I purchased this edger to edge my drive and sidewalks and not for trenching. The edger arrived very quickly after I ordered it (I am not a Prime member so this was a nice surprise). Assembly was easy and straight-forward. The first use went smoothly and the edger performed flawlessly and provided clean, smooth edging. About 20 minutes into the second use I noticed that the edger was cutting and quickly determined that the blade was spinning freely -- fortunately the hex nut was still attached to the threaded shaft. I reviewed the manual that came with the edger, grabbed the correct sized socket and torque wrench. I removed the hex nut, the first washer, the blade and then the second washer. To install I followed the directions ensuring that the flats of the washer aligned with the flat on the shaft and tightened the hex nut to the specified 140 in-lbs. The edger worked well for about 10 minutes and the blade once again became loose. This time I replaced the original blade (which did not need to be replaced from a wear perspective) with a new B&D blade and new washers. Once again I followed the instructions and this time the edger performed flawlessly until about 5 minutes remaining in my edging when once again the blade came loose. my experience has most certainly been frustrating to say the least. one should not need to carry a socket and torque wrench with them and repeatedly need to tighten the blade. So, when the edger performs as intended it does an excellent job at edging; however I have no confidence that this edger will be able to perform as intended throughout repeated uses and more importantly has shown that it cannot complete my edging without requiring tightening the blade (which requires disassembly down to the second keyed washer). Potential buyers should be prepared for this experience and make your decision accordingly. Note: I tried contacting black and decker via twitter (@blackdeckerhome) and never received a response; I could not find a separate customer service/support twitter account. Trying to contact customer service via the phone these days is an exercise in patience to say the least.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 11, 2022
C
Verified Purchase
Christopher
Phoenix, US
★★★★★ 5
Great edger for home use
This WORX 12 Amp Electric Lawn Edger did exactly what I needed it to do. It was easy to use, had plenty of power for cleaning up the edges around my driveway and sidewalk, and gave the yard a much cleaner, finished look. I like that it is corded because I do not have to worry about batteries dying, and it has enough power for regular homeowner use. The first pass took a little extra time since the edges needed cleaned up, but once I got going, it worked great. Overall, this is a solid edger/trencher for the price, and I would definitely recommend it for anyone wanting cleaner lawn edges without dealing with gas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
R
Verified Purchase
rmkd
Lexington, US
★★★★★ 5
Little work horse!
I LOVE the look of an edged sidewalk. After a few calls to some local landscape companies, I couldn't find anyone with an edger. Crazy! So I bought myself this one! Super easy to put together and just as easy to use. My walk hasn't been edged for many years and was very overgrown. I was nervous that I wouldn't be able to run this thing, but this little work horse did the job for me and did it perfectly. It will be super easy to keep it edged now. Extremely happy with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
B
Verified Purchase
B. Colonna
New York, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
J
Verified Purchase
Jason
Dallas, US
★★★★★ 5
Does the job!
Puts in the work! Knocked out my driveway no problem. Unsure about longevity but it’s great for a homeowner. Easy to assemble. Easy to use. Adjustment is nice along with the guide plate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026

recommand products