SKU: 51994264200
plant with white lily

plant with white lily Hymenocallis liriosme (native) - "Texas Spider Lily"

Sale price$21.17 Regular price$23.52
Save 10%

Pay in installments of $5.88 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 11 - Sep 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

plant with white lily Hymenocallis liriosme (native) - "Texas Spider Lily"This native lily is also known as the "Texas Spider Lily." Every April, these spidery white blooms begin to appear in wetland areas across Texas and the Southeastern United States. They make large clumps and showy displays in settings that are often too hostile to other bulbs and plants. The flowers fade as we head into May, but the show is well worth it! They produce multiple softball size blooms atop strong stalks amid dark green foliage. In pond

This native lily is also known as the "Texas Spider Lily." Every April, these spidery white blooms begin to appear in wetland areas across Texas and the Southeastern United States. They make large clumps and showy displays in settings that are often too hostile to other bulbs and plants. The flowers fade as we head into May, but the show is well worth it! They produce multiple softball-size blooms atop strong stalks amid dark green foliage. In pond areas, they look like islands of white color!

We can start with a lot of things to say about the "Texas Spider lily", but let's just start with that it is one-of-a-kind and one of the only natives we readily grow and promote. As gardeners, we are always looking for something to make our garden beautiful yet connected to our environment as well. The "Texas Spider lily" offers a unique opportunity to satisfy both of those goals. As a native though, we want to be very clear on something. Natives like to be in specific conditions.

WARNING: Yes, we have this above, but we want your bulbs to be successful for you and this is extremely important! Please note that the native habitat for this bulb is an environment in which it is extremely wet in the spring, and dry in the summer. Some examples of this would be fields that have standing water in the spring but dry out in the summer, spillways from lakes or ponds that over flow in the spring but don't in the summer, stream banks that are high in the spring and low in the summer, bar ditches that collect water in the spring off the side of a road, etc. The bulbs are smaller than what you would expect for the amount of blooms they eventually put out once they are mature. We have them circling the farm ponds at the Southern Bulb Company farm. In August, these ponds are lower and dry around the banks...the bulbs love it, and bloom in standing water in April when the ponds are high.

Appearance: When the "Texas Spider lily" blooms, the white "spiders" sit on tall, narrow stems. The dark green stems usually stand about 2 feet tall, but they can grow up to 3 feet tall depending on the conditions. The blooms usually appear in April, and the white blooms cluster to create a softball-size clump. The Hymenocallis liriosme is distinguished from other varieties by the yellow center deep in the bloom's center. The "Texas Spider lily" has a light sweet fragrance.

Resilient: The "Texas Spider lily" is a hardy plant that can grow in zones 8-10. This bulb needs to be planted in an area that is extremely wet in the spring and dry in the summer. WARNING: Native flowers and bulbs can be hard to sometimes adapt to modern landscapes. Please note that the native habitat for this bulb is an environment in which it is extremely wet in the spring, and dry in the summer.

Uses for this Bulb: Some examples of this would be fields that have standing water in the spring but dry out in the summer, spillways from lakes or ponds that over flow in the spring but don't in the summer, stream banks that are high in the spring and low in the summer, bar ditches that collect water in the spring off the side of a road, etc.

Urban examples of use for this water loving flower include detention areas required for commercial construction, natural drainage areas that need native plants and aren't easily mowed, or areas that have clean water requirements and needs plants to help filter the water before it drains off site.

The bulbs are smaller than what you would expect for the amount of blooms they eventually put out once they are mature. We have them circling the farm ponds at the Southern Bulb Company farm. In August, these ponds are lower and dry around the banks...the bulbs love it, and bloom in standing water in April when the ponds are high.

Native and History: This bulb is a native Texas bulb. It can endure the tough weather that Texas has to offer especially the hot dry summer in full sun. We have an early historical account of this bulb in the State of Texas. In the early to mid-1800's, explorer Jean Louis Berlandier, a Swiss-French botanist, charted the plants of Mexico, an area that included sections of present-day Texas. In his journal he describes a scene where his expedition party that hiked from San Antonio to Rusk, TX found itself surrounded by knee-high white lilies. Many believe these flowers were the white spidery blooms of Hymenocallis liriosme. Berlandier wrote of many interesting aspects of life in Texas in the mid 1850's, such as foot long fresh water prawns from the rivers taken to open markets in San Antonio in wooden wheel barrows. Alas, abundant foot long fresh water prawns in Texas rivers can no longer be found. However, the botanical displays of these white spider lilies have persisted and can still be enjoyed today! Drive county roads in April, and you could find yourself in the middle of these spectacular beauties. We're excited to offer them to our customers!

You will receive small to medium bulbs in this special offer. The bulbs were harvested from our wet spring soil so be prepared for them to look this way. The best thing that you can do is to plant them as soon as possible in conditions similar to their native environment - somewhere wet right now that will be dry this summer. We know that this means digging in the mud, but you are doing this for the bulbs and for the beautiful stand that you will have in the future!

If we are sold out, contact our office to be put on a waiting list for the Texas Spider Lily! You can email us at [email protected] or call us at 1-888-285-2486.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 51994264200

Discover Niche Categories That Outsell plant with white lily

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
morey smith
New York, US
★★★★★ 5
Easy to apply.
Size: 4 Oz
Product did a great job renewing my plastic house shutters. It brought back the deep rich color and made them look better the new.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
S
Verified Purchase
Stuart R. Stengel
San Leandro, US
★★★★★ 5
Great Stuff
Size: 120 ML
Product is good, Easy to spread for the most part. The only complaint I would give it is that the applicators do not hole up after several applications, I would suggest using a microfiber cloth to apply.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
T
Teresa Wilson
Louisville, US
★★★★★ 5
Restored My Trim Instantly
Size: 120 ML
I used this plastic restorer on the faded trim around my SUV, and the difference was immediate. The dull gray plastic turned back to a rich black color within minutes. It spreads evenly and doesn’t leave greasy streaks behind. After a few weeks and several rainy days, the finish still looks great. My car honestly looks years newer now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
E
Verified Purchase
Eric J. Jenislawski
Pawtucket, US
★★★★★ 5
Great result, exceptional value, and easy, forgiving application.
Size: TRIM COAT KIT
I am thoroughly pleased with the results of this product, and the application was easier than I expected. Outstanding stuff. I am writing a longer review in case it helps people who are unsure about a "once and done" product that calls itself permanent. It's not hard to apply. It is forgiving and there's time to even it out. But here are some things to anticipate. My use case: I used Cerakote to restore the plastic trim on a used 2014 black Dodge Challenger that had been repainted but the plastic trim was original and it had been kept outside by the prior owner, so the contrast between the new paint and faded trim was noticeable. The trim was originally a deep, dark gray (it is never as black as the paint). It had faded to a medium-gray in many places: running boards on the side beneath the door, below the read bumper (which were also somewhat worn from debris), around the tail lights, and the plastic piece beneath the windshield wipers between the windshield and the hood. These were all looking weathered. The trim was very oxidized in some places, chalky grey near the hood and around the back bumper. The plastic around the tail lights also had light streaks in it from where water drains down from the trunk. What else I tried before I tried Cerakote: I got middling results from Mother's Back to Black. It looked somewhat better for a week or two, and then it went back to looking as before. Not impressed. I got a tip online to try rubbing the plastic trim with a melamine magic eraser, so I did that next, and this made a significant difference. Melamine is abrasive, so be careful if you do this on your trim. I went gently, up-and-down, side-to-side and in small circles, by hand, with gentle pressure like one would with a polishing compound. By removing the oxidation, the plastic was a few shades darker in the worst spots and the streaking on the rear tail light piece was gone. The rough spots on the trim at the bottom of the car and around the wheels looked somewhat better. But it certainly did not "like new." Cerakote experience: I decided to give Cerakote a try based on the video and good reviews. Bam! Back to factory-like deep dark gray. I wish I had taken pictures. It's incredible. Fully satisfied! I had already washed the trim with Dawn dish soap. I started with the trim bone dry. You are warned everywhere that water droplets will ruin the result, so don't expect to do this process right after you wash the car unless you like to live dangerously and have compressed air to spray cracks and crevices. I was worried that application would be streaky if I didn't do it right. Not so. It is forgiving. Here's what I learned. 1) The first 20% of what you'll get out of the packet goes on heavy with the lightest touch. One packet goes a long way. The next 60% is the "normal" application. This goes on the easiest. You can really milk the last drop out of each towelette, but I didn't because the last 20% of what you can get out of it by rubbing it really hard comes out very light and is not worth the uneven application unless you have some random area you don't care much about and want to use the remainder for that. I only used 5 packets to do the whole car. When you start a new packet, the beginning is where you might want to go back later and even it out once the application gets more normal. Or better, start a new packet on a big section to spread it around well and then move to smaller trim when the towelette is less fresh. 2) You've got time to work with it and make corrections. It stayed liquid like water for at least 20 minutes in my conditions: about 80 degrees, not very humid, indirect sunlight on an 80 degree car. Don't apply in direct sun or on a hot car. The product then gets sticky as it cures, but you can still work with it during the sticky time, rubbing it in and spreading it evenly with the towelette. I did not use a microfiber to "knock down" heavy spots. I just came back around with the towelette. I think a dry microfiber might pull off too much product. When it is half-cured, it is sticky and you can buff it with the towelette at this stage to further flatten and even things out. Work in sections, one piece of trim at a time. 3) Overlaps won't show as long as you rub it all in thoroughly. I tried the overlapping parallel passes method that they recommend, and this works pretty well. I was worried that I might get a "double heavy" streak where the passes overlap but this not so unless the towelette is fresh, but this is fixable. You can do a pretty natural, casual back-and-forth motion for the most part and it comes out fine. This is NOT a super-finicky product. I made a second or third back-and-forth pass in a few areas, and used circular motion in some places where the trim was textured or a little rough from wear, and it all looked even in the end. Just rub it down into the plastic and even out the sheen while it is uncured and it's good. 4) It cures like you see it when it's still wet. It doesn't lighten up very much as it cures. It just looks a little less wet. So get it right by eye when it is wet and that's pretty much what you will still have in an hour when it is cured. 5) Don't miss a spot! You'll see it for sure if you do because the different is so dramatic. And a "second coat" is not easy or recommended. This is the only once-and-done part that you want to get right, and you have plenty of cure time to be thorough. 6) Use the folded corner of the towelette to get into small corners and edges, like where the trim meets the paint or has an inside corner or some little nook. A fresh towelette is great for getting into small areas because a feather touch applies plenty of product when the towelette is fresh. The trim now looks amazing and I am entirely satisfied. I will use Cerakote on my other vehicles. The only minor con is a strong ammonia smell when you are up close to it while it is wet. No smell once it is cured. I would definitely wear the recommended gloves while applying. As others say, you will probably drop that towelette on the ground. It's slippery when wet. Keep it folded in quarters as it comes for ease of application. Turn to a new quarter once a side gets dirty or dry and fold it inside out for four more quarters to use. Bonus, but off-label -- at your own risk: The product is not intended for the soft rubber around the windows, but I tried it there too, and it looks amazing. All I did was wash the rubber with dish soap like the trim, and I rubbed it a few times with a wet microfiber cloth to get the superficial layer of oxidized rubber off. Then I applied Cerakote. It looks great. The rubber used to be blotchy and faded. The microfiber evened this out a little. I would not use melamine on the rubber -- this made it look worse in a test section. The Cerakote made it look great: jet black, much shiner, and much more even looking. Not quite "brand new" but far better than I thought possible. I thought I might need to replace the rubber. Now it's looking great next to the jet-black new paint. This afterthought use alone was worth the money. Can you apply a second coat the next day? They don't say you can, and I don't recommend it. This is meant to be one-shot, which is why you should check to make sure you don't miss any spots. I had two areas where I tried a second coat the next day. The first was on the plastic trim between the windshield and the hood. I didn't rub this trim much with melamine beforehand so there was a lighter area (light grey originally, the worst spot) that didn't get as black as the other sections so I did it again, which helped a little, but not much. I didn't wash this area with soap beforehand because I wasn't intending to fix it until I got going. Once you put things back to black you will start noticing other faded things more. Likewise, I did a second coat on the very top of the soft rubber at the bottom of the windows (the part which faces upward and thus gets the most sun), it wasn't as shiny as the other parts, so I went over that section gently again the next day with a fresh towelette. As soon as I did it, I thought it was a mistake. This didn't go well initially because the cured coating is very hydrophobic so the new, wet, Cerakote of the second coat goes on smooth initially and then "puddles up" into little droplets a few minutes later. It doesn't want to stick to the first coat. I thought I had messed it up, but I let it cure a little until the sticky phase, and spread it out again with the towelette. It stayed that time but gathered back a little into some streaks. I spread it once more a few minutes later and it looked good. It stayed even. It looks just fine a few days later, so I think it cured OK. I hope this product last for months as advertised. Even if it doesn't I would totally do it again because the results are superior, I still have half my towelettes left, and the product is not expensive. 10/10 would do again and will recommend to everyone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 25, 2025
R
Verified Purchase
Robert Barger
Houston, US
★★★★★ 5
Easy to use, amazing results
Size: TRIM COAT KIT
This is an awesome product that is easy to use and has amazing results. My plastic trim never looked so good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026

recommand products