SKU: 52176771669
bonsai tree in living room

bonsai tree in living room Bonsai Tree 3-Piece Metal Wall Art – Galvanized Steel Bonsai Triptych Decor

$22.36 $24.84
Save 10%
No.2 Bestseller on www.warpunited.com >

Pay in installments of $6.21 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 8 - Sep 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

bonsai tree in living room Bonsai Tree 3-Piece Metal Wall Art – Galvanized Steel Bonsai Triptych Decor3 Pieces Bonsai Tree works as a focused wall feature for living rooms, bedrooms, and covered outdoor walls when generic filler feels too flat. The 3 Pieces Bonsai Tree Wall Art from Grandmix is a laser cut bonsai tree triptych in powder coated galvanized metal, three coordinated panels rendered in clean cutwork that reads as gallery grade triptych rather than printed canvas reproduction. Available in 5 sizes across Black and White finishes. Why It

3 Pieces Bonsai Tree works as a focused wall feature for living rooms, bedrooms, and covered outdoor walls when generic filler feels too flat. The 3 Pieces Bonsai Tree Wall Art from Grandmix is a laser-cut bonsai-tree triptych in powder-coated galvanized metal, three coordinated panels rendered in clean cutwork that reads as gallery-grade triptych rather than printed canvas reproduction. Available in 5 sizes across Black and White finishes.

Why It Works

  • Bonsai tree triptych in cut powder-coated galvanized metal: Three laser-cut panels combine into a single bonsai composition with intricate trunk and leaf detail, graphic, modern, and reads beautifully above a sofa, sideboard, or master-bed headboard.
  • Wide spans for over-sofa walls: From 32-inch (smallest panel set) to 63-inch oversized, pick by available wall width above a 6-foot to 9-foot sofa, console, or media unit.
  • powder-coated galvanized metal + powder-coat: Rust-resistant finish handles indoor humidity, sun-room placement, and covered outdoor walls, direct rain on a covered porch is acceptable.
  • Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

  • Dimensions: Five sizes (H × W): 32 x 16 in / 81 x 41 cm; 39 x 20 in / 99 x 51 cm; 47 x 24 in / 119 x 61 cm; 55 x 28 in / 140 x 71 cm; 63 x 32 in / 160 x 80 cm.
  • Material: powder-coated galvanized metal with electrostatic powder-coat finish (rust-resistant)
  • Finishes: Black, White
  • Weight: From about 3 kg / 6.6 lb at the smallest size (3 panels combined)
  • Mounting: Wall-mounted as a 3-panel set; mounting screws and anchors are included for each panel. Space panels 1-2 inches apart for the recommended layout.

What's Included

  • 3 Pieces Bonsai Tree Wall Art (size and finish as ordered)
  • Mounting screws and wall anchors
  • Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain, the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Meditation rooms, yoga studios, Zen-styled bedrooms, modern-Asian dining rooms, spa-bathroom feature walls, and reading-corner displays all suit this design. The piece pairs well with neutral wall paints, natural wood furniture, and minimalist supporting decor that lets the silhouette breathe across the wall.

How does it mount to the wall?
Each panel ships with mounting screws and wall anchors. Mark all panel positions on the wall using a level (panels are spaced about 1-2 inches apart for visual rhythm), drill pilot holes, insert anchors, and drive the screws.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable, powder-coated galvanized metal with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look, especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated galvanized metal with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 52176771669

Discover Niche Categories That Outsell bonsai tree in living room

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 25 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Grantham, US
★★★★★ 5
All-around thumbs up!
Size: 934W-Z, Color: Black
So far, so awesome. Easy to assemble, comfortable, arrived quickly and is exactly what I was looking for. I have a tall work bench in my new studio so I needed a chair that we could allow me to sit higher than a regular office chair and allow me to get off my feet after standing on the concrete floor. Plus its a nice looking chair that I am sure will last a long time. I love the flip-up arms and the lumbar support. This is just right!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
D
Verified Purchase
Danielle Chen
Bozeman, US
★★★★★ 5
Perfect Balance of Comfort, Support, and Style!
Size: 934-Z, Color: Black, Size: 934-Z, Color: Black
I’ve been using this chair for a few weeks now, and I’m genuinely impressed with how much of a difference it’s made in my workspace. The mesh back is one of my favorite features—it offers excellent breathability and prevents that sticky, overheated feeling you sometimes get with solid-back chairs, even after sitting for hours. The seat cushion is firm enough to give proper support but still has enough give to keep me comfortable through long workdays. It feels like the perfect middle ground between soft and supportive. The adjustable foot ring has been a complete game changer for me. I use a taller desk setup, and having somewhere to rest my feet makes a huge difference in posture and overall comfort. Whether I’m sitting upright for focused work or leaning back to read, it’s always at the right height. The flip-up armrests are another smart design choice. When I’m typing, I like to have them down for support, but when I’m done, I can flip them up and push the chair neatly under my desk—saving space and keeping things tidy. The casters roll smoothly on both hardwood and rugs, so I can move around easily without scraping the floor or getting stuck. The overall build quality feels solid and sturdy, with no wobbles or creaks. Assembly was surprisingly quick—everything was clearly labeled, the parts felt durable, and it only took me about 20 minutes from opening the box to sitting in the chair. The sleek, modern look is another big plus—it blends in perfectly with my home office décor without feeling bulky or taking up too much visual space. If you’re looking for a chair that combines comfort, ergonomic support, durability, and style, I can’t recommend this one enough. It’s equally great for work, studying, or just relaxing at your desk, and it’s definitely been worth every penny.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2025
S
Verified Purchase
sleepywan
Lake Worth, US
★★★★★ 3
OK for the price, but overall comfort is avergae
Size: 934-Z, Color: Mustard
Easy to put together, color (mustard) accurate to images, and while I understand this is not a high-end chair, I feel like it still needs to be rated for its quality. Pros: the seat cushions are fairly comfortable and it rolls well. Adjustable footrest is easy enough and mostly sturdy. Cons: For a tall office chair, it doesn't go up high enough. I actually had to lower my standing desk to sit at it, which then isn't where I want it when I'm standing now. It's also a bit wobbly. The seat area's attachment to the post isn't as solid as it should be for a tall chair, so while sitting, it does tend to lean/slope forward and wobble side to side. The lumbar support is not adjustable, so I'm not even really sure what it does. And the armrests are not very comfortable to use. Since they are hard plastic, they are just a bit too rigid to rely on for any comfort. They are basically there to hold on to when you're getting out of the chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
M
Verified Purchase
Mel
Belleville, US
★★★★★ 4
Good Value for a Tall Chair
Size: 934W-Z, Color: White
I have received this chair just today and would like to give my first impressions of it. Height is super adjustable as well as the foot rest. My desk is very tall (~34 inches vs standard ~29 inches) and does not suit a standard height chair. This chair's height is enough to sit comfortably at mybut also still having adjustment to be even higher. Lumbar support is a manual adjustment that can be adjusted by sliding the lumbar piece up or down and it seems it can be tiled as well. No reclining feature or slight backrest tilt adjustment. I'm used to my chairs reclining so it feels a little awkward siting in a flat base and straight backrest. I feel like I'm sitting too forward or leaning forward slightly but is probably something I can get use to. Easy to put together and feels very sturdy. Plastic parts of chair are made from a really sturdy plastic, like playhouse plastic materials. Wheels roll around carpet easily. Mesh seems to be a strong material, though the mesh feels kind itchy on bare skin. Overall, I think this is a good chair to get if you're needing a tall chair for a good value and can sacrifice no backrest tilt.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
O
Verified Purchase
Orion
Belleville, US
★★★★★ 5
Unexpectedly great chair - easily adjusting it to suit changing day-to-day needs makes it incredible
Color: Black Rhythm
The bottom line on this chair is that it is unexpectedly miraculous. After just 3 days, I've found it is unconventionally comfortable and the thing that makes it unique is that it renders adjusting it a normal part of its usage. I was originally like most folks, I presume - set the chair and then see how it does - but this chair demands that you use its intuitive controls to change things around as your needs change during the day. It is so easy to do, and that is where the magic is. I graduated from an excellent budget chair, the Alera Elusion high-back that is very adjustable. After over 5 years of pretty heavy usage, though, it was showing its wear, and I was really starting to feel the cushion every time I sat on it. I also started to experience some neck, shoulder, and lower back discomfort, and decided it was time to graduate to a better solution. I did not consider the Embody chair initially. At first glance, it looked a bit weird, and it was also on the expensive side, so I blew right past it. My initial starting point was the Aeron. I had used one at work years ago, and I recalled its adjustability. My body was much younger when I had used it, so I didn't experience its ergonomic benefits as well as I should have. I also looked at Steelcase models as they had some good reviews. Steelcase didn't fit my requirements as well as the Herman Miller solutions, so I gravitated strongly to the Aeron and was about to push the trigger on the order. A last second search on YouTube led me to the Embody and I was intrigued because of a couple of factors: the intuitiveness of the controls and the emphasis on the flexibility of the back and seat. The people that loved it REALLY loved it, and that, compounded with the Herman Miller return policy interested me enough to try it. So, here are some findings from the past 3 days: First, the seat is incredibly comfortable. The pixellated solution flexes with the weight that is applied to it, and it makes you feel as though you are suspended with no uncomfortable pressure points - this completely resolved the issue I was facing with the old Alera. It breathes well, is cool, and just invites you to sit down. The seat length adjustment required a little strength, but works well - you are not stuck with just the default length that might be either too small or too large. I had to adjust a couple of times to get just the right length. Once set, I don't foresee having to adjust it often. Second, I have found that I change the recline setting on the chair frequently. When I am typing, I set it so that it is relatively rigid, and when I am mostly reading, I set it so that it flexes more. There are several aspects to this - for typing, I set the tilt limiter to the position that allows the least possible movement or the next step down. I tighten the recline knob to keep me more upright, and adjust the back to a comfortable setting. It is all really easy, and the chair gives immediate feedback to ensure a good setting. When I am reading, I set the recline to setting 2 or 3 (more recline) and relax the recline a bit. That gives me the opportunity to lean back as needed and move around, with full support. If I am watching YouTube, I go to the most relaxed recline setting, and adjust the back to a less aggressive setting, and it is very comfortable. Setting/resetting all of the controls is responsive, easy, and intuitive. I never thought that this would be so required in a good seating experience. Third, I fiddled with the height of the chair to find the most comfortable setting. I use an iMovR standing desk and a Kinesis Advantage keyboard. I initially set the chair/desk combination so that my feet were flat on the ground and so that my forearms were angled downward slightly - supposedly more ergonomic. I ended up with some discomfort in my right wrist. Through experimentation, I found that raising my table or lowering the chair so that my forearms are angled a bit upwards got me in the correct wrist position for the keyboard, since it has wells. I am more upright with these settings, and am finding that my back is much more in contact with the chair, providing great and flexible support. This may not work well for folks using normal keyboards, but it is great with the Advantage. I also adjusted the height of the monitor so that it is a little higher than most ergonomic folks would recommend. I had found that by keeping the top of the monitor strictly at eye level as recommended, I was moving my head down to read the lower part of the screen, and this was causing some neck discomfort. My current setting is very comfortable. I have spent long hours in this chair over the past few days, and I am very impressed. My experience with the Alera and Aeron, both excellent chairs, is that they unwittingly promote the initial set and don't adjust paradigm, simply because adjustments, though technically possible, are not as integrated into the seating experience - you have to bend, get up, or twist unnaturally to do the adjustment. The Embody chair, on the other hand, encourages adjustments while you are in the seated position because the controls are few and easy to reach. This allows adjustments that correlate to the changing needs of our bodies throughout the day with immediate feedback because all of the controls are so well placed and simple to use. Flexibility and consistent support are inherently part of the design. No doubt that this chair is expensive, but with the generous 12 year warranty, this chair is about as good an investment you can make for your back and your general health if you spend significant time in a chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2020

recommand products

Bugaboo Dragonfly | Bugaboo Strollers | Bugaboo Canada
27.40
Bugaboo Dragonfly Seat Complete Stroller – Active Baby
26.20
Bugaboo Dragonfly Compact Stroller — Nurtured
26.22
Dragonfly Complete Compact Stroller | Snuggle Bugz
21.67
Bugaboo Bee 6 Base & Seat Fabric
25.57