SKU: 53201068191
maxi cosi coral 360 essential

maxi cosi coral 360 essential Maxi-Cosi Coral 360 Car Seat – PramFox

$20.64 $22.93
Save 10%
No.2 Bestseller on www.warpunited.com >

Pay in installments of $5.73 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 26 - Jul 31

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

maxi cosi coral 360 essential Maxi-Cosi Coral 360 Car Seat – PramFoxThe first modular 360 rotating baby car seat designed for ultra lightweight carrying; the innovative modular design of the Maxi Cosi Coral 360 combines the highest safety standard with an advanced and easily detachable lightweight soft carrier. The Maxi Cosi Coral 360 is compatible with the Maxi Cosi FamilyFix 360 Pro Base (sold separately), making it the ultimate, innovative solution for your newborn. Ultra lightweight carrying and one hand rotation

The first modular 360° rotating baby car seat designed for ultra-lightweight carrying; the innovative modular design of the Maxi-Cosi Coral 360 combines the highest safety standard with an advanced and easily detachable lightweight soft carrier.

The Maxi-Cosi Coral 360 is compatible with the Maxi-Cosi FamilyFix 360 Pro Base (sold separately), making it the ultimate, innovative solution for your newborn. Ultra-lightweight carrying and one-hand rotation makes Coral 360 the ultimate convenient solution for you and your baby. The soft carrier, which provides multiple carrying options for more intimacy, weighs just 1.7 kg and is fully upholstered with soft fabrics. The handles of the soft carrier are conveniently retractable and ensure comfortable use for both the parents and their newborn. The carrier locks easily into the intuitive safety shell, which can be clicked on the FamilyFix 360 rotative base for easy installation.

Multiple installation options

Installing the Maxi-Cosi Coral 360 has never been so easy thanks to the FamilyFix 360 rotative base, which connects to the ISOFIX anchors in your car. Click the Coral 360 on the base and just click-and-go! The Coral 360 can also be installed using only the seat belt of your car. FamilyFix 360 rotative base allows you to leave the safety shell of the Coral 360 in your car while you use the innovative lightweight soft carrier (only 1.7 kg without the newborn inlay) to go from one place to another with your baby.

With this clever modular design, you can lift your little one ergonomically out of the safety shell in the car and that with just one hand and without any hassle or bumping your head! Taking the detachable soft carrier out of the safety shell or clicking it back in requires no effort at all. The audio-visual indicators then confirm correct and safe usage.

Safety first

The innovative and first-of-its-kind Coral 360 rotating car seat is designed and manufactured with the highest safety standards in the industry (R129/03 i-Size). This means both i-Size when installed onto the FamilyFix 360 rotative ISOFIX base or with the car seat belt. So travel with your baby from birth onwards without having to worry about safety! The soft fabrics in the inlay keep your little one comfortable and safe, and lock effortlessly in the hard safety shell.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 53201068191

Discover Niche Categories That Outsell maxi cosi coral 360 essential

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 9 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
S
Bozeman, US
★★★★★ 5
Comparison with POTAUTO filter: Very similar but cheaper
I bought a POTAUTO MAP 1033C and EPAuto CP846 cabin air filter to compare them for use in my 09 Legacy (gen 4). They both seemed comparable and are cheaper than most other, similar filters, though the POTAUTO was and still is ~33% more expensive than the EPAuto. Both seem built well-enough, considering they're only being used as relatively low-flow cabin filters. That said, the EPAuto is slightly better, mainly due to the white trim piece being unattached along one side on the bottom of the POTAUTO filter. Almost certainly nothing that will affect its performance or longevity, but it is interesting considering it's the more expensive of the two. However, it must be kept in mind that this is an incredibly small sample size. In one of my very scientific tests (/s), I held them up side by side and looked through them toward the sun (obviously being careful) to judge thickness/density and uniformity. Neither had any thin spots that I noticed, and they were pretty similar overall. One of them blocked slightly more light than the other, indicating more filtration, but I unfortunately don't remember which one. I feel like it was the EPAuto, but I don't really want to speculate as I could very well be wrong. What I do remember is that the difference was so minor that all else being equal, it wouldn't justify the cost difference between the two. In other words, even if the POTAUTO were the slightly better one, it wouldn't be worth the extra few dollars for the minimal amount of extra filtration. In another test, I compared the filters to each other and the old filter (which I'm pretty sure was OEM, but certainly not a charcoal filter, so it was significantly thinner) by blowing air from a compressor through them. I held the nozzle at roughly the same distance from each on one side of the filters, and I held my other hand at roughly the same distance from each on the other side. The old filter, unsurprisingly, let much more air flow through. Both charcoal filters were much more restrictive due to their extra thickness, leading me to feel much less air coming through. Both were roughly the same. Both filters also held up just fine to the strong blasts of air. I bought a couple other filters that I was going to cut to fit to use one or both with these filters as a pre-filter and/or additional charcoal layer. After the airflow test, I decided against this, as these are a lot more restrictive than OEM already, and I didn't want to push it, since that could at best cause issues with getting good airflow into the car, and at worst could damage the blower. If not for the fact many, many people have been using these and similar filters for a long time without apparent issue caused by this, I would hesitate to even use these. I haven't noticed a decrease in the airflow, but it's doubtful I would since I rarely turn the fan up past the first couple settings (usually have it on the first) if I have it running at all, and I have the center vents pulled out (to access the inside of the dash) which causes the flow at the vents to be reduced slightly. TL;DR - Both the POTAUTO and EPAuto charcoal filters appear to be a good choice, with the EPAuto having a slight edge on build quality (based on my limited sample size of one each) and a cheaper price. Filtration appears to be very similar between the two, certainly not enough of a difference to warrant the extra price for the POTAUTO over the EPAuto. Flow is significantly more restrictive than OEM filter but doesn't appear to be an issue. I give the EPAuto 5 stars and the POTAUTO 4 stars, only because the value of the POTAUTO is a good bit less (very similar or possibly even inferior quality for 33% more money). I can't speak to their longevity or performance, but I don't imagine either should prove to be an issue. -------------------------------------------------- As a side note relating specifically to the Legacy: replacing the cabin filter in this car is a PITA. It's not overly difficult per se, but a serious pain and certainly not something you're going to do when you have a spare few minutes. I'd rate it probably around a 3.5/10 in difficulty and a 7/10 for annoyance. While you can sort of access it by removing the manual compartment, you can't remove the tray through that. So you need to actually take the whole glove box out, which requires removing the side panel, unhooking the string/loop that keeps it from falling all the way down, and removing a few plastic screws, which can be a bit of a pain (and apparently Subaru loves them since they're all over the car). A stubby Philips driver will be helpful. Once you have the glove box out of the way, you have to unscrew several more of those plastic screws to remove the plastic cover between the glove box and the filter. This hole is where you gain access. Be careful when removing the old filter as loose dirt and debris may fall out and make a bit of a mess. You don't really want to get any in the fan below it if you can help it. Reverse the steps to reassemble it, and remember to reattach the string. Getting the glove box back in its track can be a bit of a challenge; in my experience from doing it multiple times I've found you sort of half force it and half don't. That is, it'll likely offer some resistance even if it's lined up, so if you try to baby it you'll probably be there a while, but also play with the alignment a bit to see if you can get it without marring up the tab and the slot on the right side too much. All in all, expect to spend anywhere from 15-45 minutes on this, and make sure you have a standard length as well as a shorter or stubby Philips screwdriver. I have to say, when it comes to air filters, this car is horrible. The air intake filter is a pain to change, too--much worse than most if not all other cars I've done. -------------------------------------------------- Keywords: Subaru Legacy, fourth gen, fourth generation, 4th gen, 4th generation, 03, 04, 05, 06, 07, 08, 09, 2003, 2004, 2005, 2006, 2007, 2008, 2009
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 29, 2017
R
Verified Purchase
R
Cuba, US
★★★★★ 5
Good price on the part and 5 min install saved me $35
Fit fine in my 4th gen 4Runner took 5mins to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
M
Verified Purchase
M. Clark
Port Orchard, US
★★★★★ 4
Fit 4runner
Fit my 05 4runner. Good product
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 2, 2025
W
Verified Purchase
WTG
Dallas, US
★★★★★ 5
Great price!
I love that I can order these on Amazon for less than half of what I would pay at the mechanic. They fit perfect, and they're a pretty easy install.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 22, 2026
S
Verified Purchase
Sean
Carnegie, US
★★★★★ 5
Will buy again!
What a perfect replacement and they fit just right.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026

recommand products

Saint 4-in-1 Convertible Crib
25.66
Maxi-Cosi Kori 2 in 1 Rocker
23.68
Maxi-Cosi Peri 180 Rotating Infant Car Seat, Onyx Wonder
22.30
Maxi-Cosi Pria™ All-in-One Convertible Car Seat
21.79
Delta Children Saint 4-In-1 Convertible Crib
27.06