SKU: 59517236615
compare-n-save herbicide

compare-n-save herbicide Ragan & Massey Compare-N-Save Concentrate Grass and Weed Killer 41% Glyphosate - Du Bois, PA

Sale price$18.41 Regular price$20.45
Save 10%

Pay in installments of $5.11 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 26 - Jul 31

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

compare-n-save herbicide Ragan & Massey Compare-N-Save Concentrate Grass and Weed Killer 41% Glyphosate - Du Bois, PAGet to the root and kill grass and weeds with Compare N Save 41 percent Glyphosate Concentrate Grass and Weed Killer. Use for lawn or garden replacement, on patios, walkways, or in and around fences and gardens to remove unwanted grass and weeds. Visible results in as little as 2 to 4 days. Kills all grass and weeds. Rainproof in 2 hours Contains 41 percent glyphosate For Best Results: For best results, apply on a warm sunny day when daytime

Get to the root and kill grass and weeds with Compare-N-Save 41-percent Glyphosate Concentrate Grass and Weed Killer. Use for lawn or garden replacement, on patios, walkways, or in and around fences and gardens to remove unwanted grass and weeds. 

  • Visible results in as little as 2 to 4 days.
  • Kills all grass and weeds.
  • Rainproof in 2 hours
  • Contains 41-percent glyphosate

For Best Results: For best results, apply on a warm sunny day when daytime temperature is above 60°F and no rainfall is forecast for 24 hours. Because this herbicide will kill all green plants including lawn grass it is not recommended for spot spraying in lawns.

Kills To The Root: Be sure to spray the foliage of the treated plants and avoid any spray mist drifting to plants you do not wish to treat. Glyphosate is absorbed through the foliage and travels to the root to kill the plant.

Mixes Easily With Water: Use 1.5 ounces (3 tablespoons) of concentrate in 1 gallon of water for general weed control. For tougher weed control of perennials or brush, mix 2.5 ounces (5 tablespoons) in 1 gallon of water. One gallon of ready-to-use equivalent will cover 300 square feet.

No Residual Activity: Glyphosate is a post-emergent herbicide. It will not prevent new or future growth. Treated areas can be replanted in as little as one day in ornamental areas. See the label for a complete list of when to replant fruits and vegetables.

WHERE TO USE:

Around farm buildings and barns Driveways Agricultural uncultivated areas
Ornamental gardens Gravel paths For establishment and maintenance of wildlife openings.
Roadsides Along fences Walkways
Parking areas Farmyards Mulch beds
Vacant lots Lawn replacement

 

WHEN TO USE:

Use any time weeds are actively growing. Most treated weeds show initial symptoms in 2 to 4 days and complete kill in 1 to 2 weeks. Larger more established weeds may take up to 4 weeks for complete kill.

For best results, apply on a warm, sunny day when daytime temperature is above 60°F and no rainfall is forecast for 24 hours. Warm, sunny weather will speed up weed control.

Apply only when air is calm. If necessary, use cardboard or plastic to shield desirable plants.

Reapply if it rains within 2 hours after application. Rainfall or watering 2 hours after application will not wash away effectiveness.

HOW TO USE:

To apply this product, use

  • Plastic, aluminum or stainless steel tank sprayer
  • Other hose-end sprayer recommended for weed killers
  • Hand-trigger sprayer

Do not use or store solutions of this product in galvanized steel or unlined steel sprayers, or apply through any type of irrigation system or with a sprinkling can.

Rinse sprayer and flush all sprayer components with water 3 times after use. Spray rinse water on bare soil or gravel. After very thorough cleaning, sprayer may be used to apply other products. Close cap tightly after use.

General Weed Control

Use along fences, paths, patios, sidewalks, driveways and in brick and gravel walkways, around trees, shrubs, ornamental plantings and flower beds, and around buildings. Use to trim and edge landscape areas.

Spot Spraying

Use on actively growing weeds in and around flower beds, ornamental trees, fruit and nut trees, grapevines, shrubs, fences, driveways and walkways. Make sure Concentrate Grass & Weed Killer 41% Glyphosate does not contact the leaves, green stems or exposed roots of plants you don’t want to kill. Concentrate Grass & Weed Killer 41% Glyphosate will not move in or on the soil to untreated plants. If used to control weeds around fruit or nut trees or grapevines, allow 21 days before eating the fruit or nuts.

Landscaping

Use to prepare areas for planting of ornamentals, trees, shrubs, desert landscapes, rock gardens, flower beds or similar plantings. Treated areas can be replanted 1 day after treatment.

Lawn Renovation

Use to kill existing weeds and grasses including the old lawn. For best results, apply in spring or fall, when daytime temperatures are at least 60°F. See label for complete lawn renovation instructions.

Brush Control

Use when brush is green and growing. If plants are taller than 5 feet, cut back and spray regrowth. Brush sprayed in the fall may not be fully controlled until the following season. Hard-to-control species such as blackberry, kudzu or poison oak may require a second application.

Stump Treatment

Stumps can be treated to prevent regrowth. For best results, treat when the vegetation is actively growing and within 5 minutes of being cut down. See label for further instructions. Treatment will control or suppress many types of woody brush and trees, such as alder, bluegum, eucalyptus, madrone, oak, giant reed, saltcedar, sweetgum and tan oak.

Vine Control

  • If vine is growing up a pole, fences, or mature tree trunk, cut vine to a height of 3 to 4 feet and spray to thoroughly cover remaining vine.
  • If vine is climbing a shrub or immature (green) tree trunk, cut vines at base and spray its regrowth. Shield shrubs and green bark from spray drift with a sheet of cardboard or plastic.

PRECAUTIONS:

Concentrate Grass & Weed Killer 41% Glyphosate is an all-purpose weed and grass killer which will kill almost all plants it contacts. DO NOT use for spot weed control in lawns since Concentrate Grass & Weed Killer 41% Glyphosate kills all green plants, including lawn grass.

If necessary, use cardboard or plastic to shield desirable plants. If plants are accidentally sprayed, rinse off immediately with water. Spray when air is calm. Spray to evenly wet the weed.

ACTIVE INGREDIENTS:

Glyphosate, isopropylamine salt 41.0%
Other Ingredients 59.0%
Total: 100.0%

 

DISCLAIMER:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read the entire label before each use. Use only according to label instructions.

See the complete label for specific use rates and detailed instructions.

Consult the Safety Data Sheet (SDS) for important safety information.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59517236615

Discover Niche Categories That Outsell compare-n-save herbicide

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
James
Fort Morgan, US
★★★★★ 5
Great Banana Plugs
Size: 6 Pairs / 12 pcs
I recently purchased these FosPower banana plugs to tidy up my speaker wiring, and they’ve been a significant improvement over bare wire ends. Installation is straightforward: strip the wire, loosen the two tiny set screws, slide the wire in, tighten everything down, and then screw the barrel back on. Once assembled, the connection feels secure and tight, making it much easier to swap gear around and reducing the risk of stray strands causing a short. The standout feature of this design is the dual set-screw clamp. It firmly grips the speaker wire without relying on the outer collar to “crush” it in place. I’m using 12-gauge wire, and it holds well for my setup. Initially, the plugs may fit snugly in some binding posts. Once seated, there’s no wobble, but it might take a bit of extra push the first time. The set screws are small, so a bit of precision is needed. Use a small flathead screwdriver and don’t over-tighten them. Overall, these plugs feel well-made, look clean once installed, and fulfill their purpose as banana plugs: making speaker connections quick, neat, and reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
T
Verified Purchase
Todd C Blake
Los Angeles, US
★★★★★ 5
Great Banana Plugs!
Size: 6 Pairs / 12 pcs
These FosPower banana plugs work very well. I have used dozens of these great FosPower banana plugs over the years, and they definitely work as advertised. When comparing apples to apples (or bananas in this case....lol), all Banana plugs work virtually the same way, and these banana plugs are no different. Strip speaker wire, unscrew banana plug cover, loosen speaker wire retaining screw(s), insert speaker wire, tighten speaker wire retaining screw(s), screw on banana plug cover, and wallah, a secure/conductive speaker/amplifier wire connector is created. Albeit, some banana plugs require the speaker wire to be splayed over a hollow post, and then they are held down by a screw-on retainer/cover. However, I much prefer these FosPower dual retaining screw type of banana plugs for their speaker wire holding ability. I always use high quality 14 gauge OFC speaker wire with these FosPower banana plugs, and they work perfectly together. I have used these FosPower banana plugs with many different speaker and amplifier brands over the years, including Klipsch, Pioneer, Polk, Denon, Dayton Audio, and Fosi with no problems at all. They just work, and work well. I have never had a FosPower banana plug break, release the speaker wire or short out, in all of the years that I have used them. Yes, these FosPower banana plugs do fit rather tightly into the connectors, at first, on a lot of speaker and amplifier brands/models. However, after the initial "squeeze" the banana plugs will lossen up, and become easier to install and remove. However, they still retain their great holding ability even after the initial squeeze. In order to overcome this initial "tightness," I usually just stick the FosPower banana plugs into a connector of an old portable amplifier, before assembling them, in order to squeeze them before inserting them into their final speaker or amplifier destinations. This is especially useful when working in tight places, where there is not much room to work in order to push the FosPower banana plugs into their tight connections firmly. Overall, I highly recommend these FosPower banana plugs. I am currently using them all over the house and shop for home theater and music listening (and testing projects). Just be aware of the tight fit in some speakers and amplifiers. Also, the 2 very tiny speaker wire retaining screws can be a challenge sometimes. Just use a good standard blade jewelers screwdriver, and be careful not to remove the retaining screws all of the way or over-tighten them. Once these things are mastered, using these FosPower banana plugs becomes second nature. Have fun!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 28, 2024
S
Verified Purchase
Steve M Vedder
Chelsea, US
★★★★★ 5
Great Product
Size: 6 Pairs / 12 pcs
These banana plugs have worked perfectly, no matter what gauge I have run in them, they work great. Easy assembly and great quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
P
Verified Purchase
PowerTripp
Lowell, US
★★★★★ 4
The most legit banana plugs I could find on Amazon
Size: 6 Pairs / 12 pcs, Size: 6 Pairs / 12 pcs
NEW PREFACE:: I am kind of glad I first bought the horribly magnetic, horribly made and GOLD PAINTED Sewell crimp on plugs (some reviewers say that Sewell are better and easier to use than the FosPower, which is true in design, but in quality of materials FosPower beats them hands down!!) ... Changing from those to these FosPower plugs plus the Monoprice 90° plugs, I am flabbergasted at the difference they make in sound quality. I have heard people say that they can hear the difference and even as an audiophile I was skeptical..... but my skepticism has been completely erased by what I am hearing with my own ears. I waited a few days to make sure I wasn’t just tripping before updating this review 🤣....but it has become clear to me how much a difference plugs made from the right materials actually make!!! I am 100% serious that the bass coming out of my Polk Signature Series tower speakers has at least doubled at the same volume. I can also now turn the volume up Way past my max volume before, without any distortion and much more clarity and less harsh highs. Everything just sounds warmer in general now which is amazing!!!! This is dangerous info for me... because now I’m thinking about making some really nice custom wires to see how much of a difference that makes 🙄🙄🤣 OK onto the review of the actual plugs here~~ These seem like decent connectors. I can’t tell if they are brass or copper, but they only have a slight hint of a magnetic property when testing them with a very powerful magnet. I was easily able to fit x2 - 14ga wires into it for bi-wiring purposes, including screwing on the collar. (As seen in my example pic) The gold plating on the tips seems legit and not painted like some of the plugs from Sewell... I have tested and tried quite a few plugs from Amazon and most seem to be crap. These however hold up better than most! These and the Monoprice 90° banana plugs with the black and red rubber sleeves. The latter are gold plated copper and have zero magnetic properties. (if you need 90° banana plugs) UPDATE: still the best plugs I have found, but upon full install found two issues. One is a defect where a set of the plug threads for the barrel cover body weren’t cut right. The body’s do not tighten and stay loose because of that. Obvious issue for vibration with metal on metal... The other issue is that even though these say they can fit different gauge wires, they seem to be geared more towards 12 or 10 gauge. I am using semi solid strand 14 gauge and find that unless I fold the wire over to make it double thick, the bolts use up all the thread and seem to become kind of loose inside the body. They won’t fully seat and keep spinning no matter how much you tighten. They seem to stay secure still but I just wonder about longevity over time with vibrations. So I just doubled up the wire and they seated fine! Not the worst issue in the world, but just kind of a pain since you have to strip the wire longer than you normally would so you can fold it over. ANOTHER UPDATE: I had to remove these plugs from the wire to connect them to a crappy spring terminal amp while my better amp was in the shop. The issue I wrote about with the set screws "bottoming out" on smaller gauge wire became a more pronounced issue! I could not unscrew the set screws anymore and just had to cut the wires... So that means I will need to purchase more of these to replace the ones I cannot get wire back into. Not the best design, but still one of the best plugs I have found on Amazon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2021
R
Verified Purchase
Russell B
Alexandria, US
★★★★★ 5
Sturdy. Tight fit. No wobble
Size: 2 Pairs / 4 pcs
These are the best ones I’ve found. This order will connect one wire. Luckily that’s what I needed. If you’re doing more than one wire…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026

recommand products