Pay in installments of $7.02 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 17 - Oct 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
uppababy car seat strap covers UPPAbaby Aria V2 Infant Car Seat + Base – Berg's Baby & Teen FurnitureBuilt For Their Safety. Designed For Your Ease. Aria V2 is designed with a Load Leg and Anti Rebound+ Panel to reduce crash forces and protect what matters most. Safe, secure, and portable, all in a thoughtfully lightweight design. Product highlights The Anti Rebound+ Panel and Load Leg are designed to help reduce movement and absorb energy, providing more protection in a crash The visual indicators within our SmartSecure System helps ensure a correct
Built For Their Safety. Designed For Your Ease.
Aria V2 is designed with a Load Leg and Anti-Rebound+ Panel to reduce crash forces and protect what matters most. Safe, secure, and portable, all in a thoughtfully lightweight design.
Product highlights
- The Anti-Rebound+ Panel and Load Leg are designed to help reduce movement and absorb energy, providing more protection in a crash
- The visual indicators within our SmartSecure® System helps ensure a correct and confident install, every ride
- The harness adjusts easily, even with baby in the seat, protecting baby as they grow without rethreading straps
- Advanced Side Impact Protection with energy-absorbing EPP foam to cushion and shield in a collision
- Two-piece robust infant insert ensures proper fit and body positioning for preemies from approximately 4 lbs. with ability to fit babies up to 4 months
- Extra-large, UPF 50+ canopy with pop-out sunshade and ventilation for airflow
- Lightest infant car seat on the market weighing in at just 6 lbs
- Direct attachment for Vista® and Cruz® strollers + convenient adapters for the Minu® and Ridge®
Additional Highlights
- Advanced Protection
- Meets FMVSS 213a and 213b safety standards for side and frontal impact protection
- Carrier is FAA certified for aircraft use
- Ride-share and airplane friendly, with option to use a secure seat belt installation without the base
- Base Installation & Vehicle Fit
- Auto-retracting LATCH for effortless installation
- Built-in lock-off for secure seatbelt installation
- Dual bubble level indicators ensure correct base alignment
- Adjustable base foot with four positions to accommodate different seat angles
- Narrow 17” wide footprint to maximize space in your backseat
- Child Fit & Comfort
- Adjustable headrest with 25 preset positions for a more precise fit
- Simple one-crotch buckle position simplifies the buckling process
- Back panel ventilation for additional airflow keeping baby cool and comfortable
- Included All-Weather FootCover ensures baby is secure, cozy, and covered in all seasons
- Adjustable headrest with 25 preset positions for a more precise fit
- Carrier Ease
- Ergonomic aluminum carry-handle for comfort and portability
- Easy-to-release base for quick attachment and detachment
- Removable, machine-washable seat and canopy fabrics for easy cleaning
- Ergonomic aluminum carry-handle for comfort and portability
- All the Extras
- All fashions are Fire Retardant Free through our DualTech™ fabrics
- GREENGUARD® Gold Certified to support healthier air quality and low chemical emissions
- Streamlined, low-profile base with finished bottom
- One-on-one virtual consultations for product support, car seat checks, or service appointments
- Product Lifetime Warranty
- All fashions are Fire Retardant Free through our DualTech™ fabrics
What's included
- Carrier
- Two-piece robust infant insert
- All-weather FootCover
- Base
- Product lifetime warranty
Specifications
- Carrier weight (without canopy and insert): 6 lbs
- Base weight: 12.6 lbs
- Carrier dimensions: 25.8” L x 17” W x 23.7” H
- Base dimensions: 23.9” L x 14” W x 15.2” H
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 12 reviews
Sort
Product Reviews
★★★★★ 5
Great Quality and Value - Perfect Connections
Size: 10 Pairs, Pattern Name: Banana Plugs
I used these Monoprice 24k gold-plated banana plugs to connect both my surround sound and desktop speakers, and they work perfectly. The connections are solid and secure, with no looseness or signal issues.
They’re easy to install, look great, and offer excellent value for the price. Highly recommended!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 5, 2025
★★★★★ 5
Fantastic speaker plug at a great price!
Size: 5 Pack, Pattern Name: Banana Plugs
This is a product that gets the job done effectively, and at a good price. Banana plugs are used to clean up speaker wire - you can generally screw in speaker wire, but banana plugs provide a nice interface that allows you to plug in and remove speaker wire as needed.
These closed plugs do a good job terminating / hiding the wire. They fit very well into various components and amps that I own.
INSTRUCTIONS to install / use them:
* Remove around 1" - 2" of the white casing to expose the red and white individual speaker wires
* Strip each wire so ~1/2" metal is showing
* Make sure the plug end is screwed in tightly (this does not need to come out)
* Unscrew the base of the plug from the other end
* WithOUT twisting the metal wiring, insert the wire (match wire color with plug color; start with either one) from the bottom of the plug until the metal sticks out the top
* Have ~1/4" metal hanging past the plug
* take the wiring and drape it down the sides of the plug (just the smooth side, do NOT cover any of the screw threading or it will be very hard to close it)
* Spread the draped wiring around the plug as evenly as possible (makes it easier to screw in later)
* Screw the two ends of the plug back together (the side with the draped wiring will go inside the plug)
* If you get stuck while screwing it back in, unscrew and adjust the wiring
* Repeat for the other side, and you're done!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2019
★★★★★ 4
pretty good banana plugs
Size: 5 Pack, Pattern Name: Banana Plugs
i bought these over 6 months ago and i just installed them to the front left and right floor standing speakers - sony ssf-7000 i have them for over 10 years hooked up to a yamaha 7.1 AVR.
alot of people have had trouble installing this - one single banana plug comes in 3 parts - the bottom and top (the banana plug tip) can be unscrewed.
what i did was tightened the top first (top being the tip of the banana plug) then unscrew the bottom off completely - make sure you have like 3/4" - 1" (depending on your gauge of wire) of exposed speaker wire that is straight - then thread it through the hole at the bottom up - i then rolled the exposed 3/4 - 1" exposed copper wiring into a ball that is bigger than the hole of the banana plug bottom piece so the wire doesn't fall back through where it came from. then i screwed on the top and middle piece back with the bottom piece - tightening it a bit so i know there's good contact. also make sure the tip is screwed in all the way as well as a double check. what you don't want to do is have the copper wire touch the threaded part of the bottom piece - the wire will cut off from the screwing action.
i plugged it into my sony speakers and it wasn't a real snug fit - a bit too loose to feel secure - it didn't seem to go all the way in - but it fit fairly well in my receiver. my intention was to use these banana plugs with my 2 channel set up but i decided to go pre-constructed mediabridge 12 AWG speaker cable instead - those fit my 2 channel set up on my receiver and elacs really snug and secure.
i tested it and it works fine. i didn't hear any loss of signal or any extraneous noise. none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there.
i bought 5 pairs - but i find that it is an odd number to include a package - even numbered pairs would be better.
anyway they seem constructed well - easy enough to install and they do work.
thanks for reading
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 12, 2019
★★★★★ 5
High quality and robust
Size: 12 Pairs, Pattern Name: Banana Plugs
Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
★★★★★ 5
Solid banana clips
Size: 5 Pack, Pattern Name: Banana Plugs
Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
recommand products
Evenflo Gold Revolve360 Extend All-in-One Rotational Car Seat with SensorSafe
23.61
Evenflo Revolve360 Rotational All-In-One Car Seat
24.08
Evenflo GOLD SensorSafe Revolve360 Extend Rotational All-In-One Conver – Albee Baby
21.66
Evenflo Revolve360 Extend All-in-One Rotational Car Seat with SensorSafe
26.36
Evenflo Revolve360 Slim 2-in-1 Rotating Car Seat with SensorSafe
20.89