Pay in installments of $5.29 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 14 - Sep 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
planting clover seed Hancock's Microclover® SeedMicroclover provides all the same advantages of regular clover but has a much smaller leaf size. It features excellent nitrogen fixing abilities without the use of extensive fertilization, fungicides, pesticides, or mowing. And, of course, it makes for beautiful turf. Microclover can be planted as a standalone lawn, or overseeded into existing lawn grasses.~~~ Microclover provides all the same advantages of regular clover but has a much smaller leaf
Microclover™ provides all the same advantages of regular clover but has a much smaller leaf size. It features excellent nitrogen-fixing abilities without the use of extensive fertilization, fungicides, pesticides, or mowing. And, of course, it makes for beautiful turf. Microclover™ can be planted as a standalone lawn, or overseeded into existing lawn grasses.~~~
Microclover™ provides all the same advantages of regular clover but has a much smaller leaf size. It features excellent nitrogen-fixing abilities without the use of extensive fertilization, fungicides, pesticides, or mowing. And, of course, it makes for a soft and beautiful turf suitable for high traffic. Microclover™ spreads densely and evenly preventing weed growth and can be planted as a standalone lawn, or overseeded into existing lawn grasses. Adding just 5%-10% of Microclover™ to your existing grass seed mixture or current lawn will result in a much improved turf.
Product Information
- Application or Use: Lawn, Golf Courses, Athletic Fields, Parks, Ground Cover
- Germination Time: 7 - 14 days, under optimal conditions
- Growing Locations: Warm Season, Transition Zone & Cool Season Zone
- Height: 1 - 5 inches, depending on mowing regimens
- Sunlight Requirements: 4 - 6 hours
- Advantages: Extremely cold and shade tolerant while moderately tolerant of drought and wet conditions.
- When to Plant: Recommended planting time in spring is after the last chance of frost when nighttime temperatures are consistently 40+ degrees and below 65 degrees. Recommended planting time in late summer / early fall is at least 8 weeks prior to first frost.
Characteristics
Microclover™ provides all the same advantages of regular clover but has a much smaller leaf size. It features excellent nitrogen-fixing abilities without the use of extensive fertilization, fungicides, pesticides, or mowing. And, of course, it makes for a soft and beautiful turf suitable for high traffic. Microclover™ can be planted as a standalone lawn, or overseeded into existing lawn grasses.
Microclover™ benefits your existing lawn grasses by providing natural nutrients...truly it's own organic fertilizer! Microclover™ has excellent cold, drought and traffic tolerance. The turf is very dense, very lush, and very beautiful. It can tolerate wet (not to be flooded for long periods of time) and shade conditions, as well as drought.
Many customers enjoy Hancock's Micro Clover as an option for alternative lawns because it has a dark shade of green that is comparable to those found in more traditional lawns. Microclover™ is a variant/selection of common White Clover that has been cultivated to supply a less problematic partnership with traditional lawn grasses. Common White Clover was once a more popular lawn option, however it frequently formed clumps and in turn created troubles for those emphasizing lawn grasses. This, and the advancement of herbicides that would kill off standard White Clover, led to the development of Microclover™, which grows lower and mixes better with lawn grass accordingly. Although it does flower, Hancock's Micro Clover does not create nearly as many blooms as traditional White Clover.
Microclover™ is extremely cold tolerant. It will go dormant slightly in the winter months, depending on location but is very aggressive and will most likely come back under harsh winter conditions. Killing frost or ice may be the exception. Microclover™, in light dormancy, will slow down and lose some vigor causing the color to dull but not completely go away.
Mowing Regimens & Guide
If Microclover™ is not cut, then the leaf size increases, the more it is cut then the smaller the leaf size. When Microclover™ is not mowed at all, the leaf size will be about 1/2 the size of White Dutch Clover. When it is mowed, new leaf heads form within a few days so it continually looks thick and lush. If it isn't mowed, it will get approximately 6 inches tall. If you mow it, it will want to quit growing just slightly taller than the height it was mowed at. For example, if you mow it at a height of 3 inches, it will head back out and quit growing at a height of approximately 4 inches. In other words, you can almost "train" its growing height with infrequent mowings. Microclover™ could present with larger leaves due to lack of density. In the springtime, especially in the first year, the clover can present with larger leaves as it attempts to reproduce as well. If you have areas with larger leaves, we recommend adding more seed to the thin areas to increase the density, then try to keep it between 1 and 4 inches in height. This should greatly improve the size of the leaves by not only adding more plants, but continuing to mow it low to encourage it to spread out which will also boost density. By doing this, the leaves should be smaller as they expect it look.
This seed is surrounded in a clay based coating with inoculant, which aids in moisture retention for germination, birds tend not to eat the coated seed, and it is easier to see where it has been spread. In addition, pre-inoculated seed aids in germination and better, overall success. The coating takes up a portion of the bag, which means less seed per pound but you are getting the added benefit of the coating and inoculant. The raw seed is just how it sounds, seed in the purest form - not coated or mixed with anything.
*Product packaging may appear different than what is pictured.~~~
Soil Prep
- When choosing to start a new lawn, remove old vegetation by using a de-thatcher, power rake or tiller to kill the existing vegetation. Rake or drag the area to remove debris and dead grass for a clean area. Ensure the soil is leveled and loosened to allow the seed to have good soil contact once spread on a clean seed bed.
- If you have an area with heavy weed coverage, we recommend starting fresh by killing and removing the existing vegetation. If you choose to use chemicals, herbicides or fertilizers, you must check with the product’s manufacturer prior to planting new seed to ensure the proper waiting period.
- When overseeding an existing area, mow your lawn at the lowest setting and bag the clippings. Rake or drag any areas that have dead thatch or debris.
Seeding
- Seeding Rate: 2 lbs. per 1,000 sq. ft. or 100 lbs. per acre
- Overseeding Rate: 1 lbs. per 1,000 sq. ft. or 50 lbs. per acre
- Recommended planting time in spring is after the last chance of frost when night time temperatures are consistently 40+ degrees. Recommended planting time in late summer / early fall is at least 8 weeks prior to first frost. In the south where snow and freezing temperatures are rare, you may plant all through the winter.
- Spread at the recommended rate based on total area and whether it is bare ground or pre-existing vegetation.
- Spreader Settings: There is not any one setting that applies for all brands of spreaders. We recommend reviewing the seed settings chart that came with your spreader or contact the manufacturer directly. Ensure you are choosing a seed on the list by the manufacturer that closely resembles the seed you are choosing to plant.
- If you have any concerns on what setting you should use, we recommend always starting with the smallest option then adjusting it to match the recommended seeding rate.
Fertilizer
- Grass like all living things need food to survive. Food for grasses is fertilizer. We recommend fertilizing every 3 - 4 months with Hancock's 16-04-08 Lawn & Pasture Fertilizer. Our 16-04-08 Lawn and Pasture Fertilizer is custom blended to provide a slow-releasing, water-activated economical fertilizer. Hancock's 16-04-08 Lawn & Pasture Fertilizer can be applied at a rate of 5 lbs. per 1,000 sq. ft. or 250 lbs. per acre. The most probable cause of a declining lawn or pasture is poor nutrition. If you have any concerns about your soil, we recommend getting your soil tested to determine what nutrients you are low in as well as your pH. The results of the soil testing will give you the best information to amend your soil for the best grass growth.
Watering Schedule
- For best results, water your lawn each morning and evening for 30 minutes based on weather conditions, until the new seedlings have reached the height of 3 - 5 inches for lawns or 8 - 20 inches for pasture.
- Once they have reached that height, water 3 times per week as needed.
- For best results, keep the soil moist while not over-watering the area or creating puddles.
Germination Time
- 7 - 14 days, under optimal conditions
Mowing Requirements
- 1 - 5 inches; depending on mowing regimens
- If Microclover™ is not cut, then the leaf size increases, the more it is cut then the smaller the leaf size. When Microclover™ is not mowed at all, the leaf size will be about 1/2 the size of White Dutch Clover. When it is mowed, new leaf heads form within a few days so it continually looks thick and lush. If it isn't mowed, it will get approximately 6 inches tall. If you mow it, it will want to quit growing just slightly taller than the height it was mowed at. For example, if you mow it at a height of 3 inches, it will head back out and quit growing at a height of approximately 4 inches. In other words, you can almost "train" its growing height with infrequent mowings. Microclover™ could present with larger leaves due to lack of density. In the springtime, especially in the first year, the clover can present with larger leaves as it attempts to reproduce as well. If you have areas with larger leaves, we recommend adding more seed to the thin areas to increase the density, then try to keep it between 1 and 4 inches in height. This should greatly improve the size of the leaves by not only adding more plants, but continuing to mow it low to encourage it to spread out which will also boost density. By doing this, the leaves should be smaller as they expect it look.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 12 reviews
Sort
Product Reviews
★★★★★ 5
Amazing deal on everything you need to keep your Omni C20 going for years
First and foremost, when I opened the package all the side brushes were all bent up crazy and all over the place (appearing to be ruined) but there was a little business card tucked away in the bag (I included a picture) that tells you to put them into 80 degree Celsius water (which is 176 degrees Fahrenheit BTW) and that they would straight and I have to admit I was skeptical... until about 5 minutes ago.
WOW - I mean WOW - they straightened right up like it was poetry in motion, very cool to see it work - in my case I dipped the ends in individually 1 by 1 with all 6 of them and they're good to go now.
Tested the pads for size and fit as well as the rollers, filters and bags the other day and they were all perfect matches as well.
They also packed it extremely efficiently in a nice bag which is very reusable for long term storage.
Also included is a detangle cutter if you have people with long hair in the house - and a brush for filter and roller cleaning if needed.
It's such an incredible set that LITERALLY every single Omni C20 should buy. It's a no brainer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
Replacement Kit for Eufy C20 Omni
I got this 28-piece accessory kit for my robot vacuum, and it is a great value for the price. It contains everything you need for several rounds of maintenance, including main brushes, filters, side brushes, mop pads, and dust bags. It even comes with a small cleaning tool and a screwdriver to help with the installation.
Everything in the pack fits the C20 Omni perfectly and works just as well as the original parts. The mop pads are absorbent and easy to wash in the machine, and the brushes do a good job of picking up dust and hair. It’s much cheaper than buying brand-name replacements and makes it easy to keep the robot running at peak performance.
Overall, it is a functional and complete product that does exactly what it is supposed to do. It is a simple and cost-effective way to stock up on all the replacement parts you'll need for several months.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
★★★★★ 5
Roborock S7 MaxV keeps my laminate floors dust free.
Although the Roborock S7 MaxV is not light on the wallet it has proven thus far to have been well worth the money spent. I did several weeks worth of research before buying this robotic vacuum cleaner. I chose not to buy the new S8 because I have all laminate flooring, no carpet anywhere and the S7 single roller seemed the logical choice. I ended up getting the black S7 MaxV and the white Auto-Empty charging dock separately because it was cheaper and there did not seem to be anyplace selling both the units in black.
=== THE VACUUM CLEANING UNIT ===
* The initial rapid (no vacuuming option) LIDAR MAPPING is exceptional in it's accuracy although if a room has ceiling to floor mirrors the LIDAR laser ranging will think that what's in the mirror is another room and it will show on the map on your cell phone app. Just create a "no-go" zone for that area and no problem. With each successive cleaning the machine seems to fine tune it's "understanding" of each room. However if one completely rearranges everything in a room it may take a run or two for it to fully adapt.
* The OBSTACLE AVOIDANCE artificial intelligence exceeded my expectations. That said, when I do manual vacuuming I always move things around some to get to various tight spots so I do something similar for this robotic vac before turning it loose and I'm not lugging around a manual vac while doing so. Obviously if an object is very small it will not be considered an obstacle and it will go over it and try to suck it into it's dust bin. Sometimes an A/C power cord will fall into this category and it will wrestle with it and in my experience it eventually just leaves it but I just make sure I clear such wires before sending the gizmo on it's vacuum run.
The obstacle avoidance feature has 2 settings with one being less strict than the other setting. I use it on the less strict setting so that it navigates narrow spaces more thoroughly. This can result in it bumping a door that is ajar such that it shuts itself into a room and can't get out by itself to either go on the next room to vac or to the charging dock. I just wedge rubber door stops under the ends of such doors and they stay put during operations. The MaxV variant of the S7 has the more advanced AI obstacle avoidance system and to me was worth the extra cost. The newer S8 units have similarly capable obstacle avoidance systems using just slightly different technology.
* Roborock's mapping app for the cell phone does the job and and can be updated automatically. My only very minor issue with it is that when dividing rooms or marking off "no-go" zones on my smaller Android phone it can get a bit fiddly but I think most people have iPad sized phones these days so likely won't find this an issue.
=== THE AUTO-EMPTY DOCKING UNIT ===
* The docking unit is pretty straight forward and does a stellar job of emptying 95-100% out of the vacuum's sealed on-board dust bin into the sealed bag within the sealed container on the dock. The dock has an additional HEPA filter which prevents essentially any particles from escaping into the air around it. It can be rather loud during this operation which will at most only last 30 seconds. The empty frequency can be adjusted from "Smart", "Light", "Balanced" and "Max". the "Max" runs the full 30 secs and the other 3 are pretty much left up to the AI to figure out. Not sure what the diff is between the "Smart" and "Balanced". I just use "Balanced" and if in doubt manually run it from the app which will go 30 secs. I haven't filled the bag yet because it claims to hold 1-4 months worth of dust but that depends on how many pets, kids, foot traffic and where one lives as to how much service will be had from the bag. Also with this older (released early-2022) Roborock Auto-Empty units used with the model S7 MaxV vacuum a non-bag canister can be obtained which I purchased just in case inflation (no pun) makes buying bags a "no-go" zone. I don't think Roborock is offering that option with their latest S8 units. I just swap the container holding the bag with the special container using no bag.
=== THE APP USED TO CONTROL EVERYTHING ===
* I mentioned what I deemed the most significant aspects of the app above but it has other features which can be found in the manual and on Youtube.
Bottom line is I am most pleased with my new Roborock vac. It keeps my house clean with really minimal effort. I am a bit of a technical geek (retired programmer/analyst) so maintaining the thing is more fun than a chore to me. It also made me laugh one time when I sent it on a mission to vacuum the wash room. I heard the unit's voice announce that it was leaving the dock to go clean. It rolled out into the living room where I was sitting and at first seemed to be looking around as though lost moving to and fro then after a few seconds of roving it suddenly figured out what to do and went straight through the dining are to the wash room to finish it's mission. This likely is not as amusing put into words as it was to watch.
UPDATE 05-05-2023: After more time with this Roborock S7 MaxV I felt relating some additional experiences may be useful to some. Although I have not used the vacuum's mopping feature at all because my main interest is in it's vacuuming and superior navigational capability over time I began noticing my laminate flooring suddenly looking shinier. Mind you I hadn't manually mopped in an embarrassingly long time so this vac was doing better than I with my excellent Miele canister vac which I now only use to occasionally tune up the Roborock of accumulated surface dust from it's missions. The robot vac shamed me into actually doing a proper mopping of the floor. Now it will stay that way.
The point here is that prior to using this type vacuum it is very useful to first thoroughly clean the floors (or carpets) as a baseline THEN use this spiffy device to keep it that way on a daily basis as it has for me. I'm an older widower living alone now for 8 years and I try to keep the place as clean as possible. With the S7 MaxV it's like having a service regularly vacuuming the floors. I live in the mountains and it takes no time for dust to accumulate here so again I am quite satisfied with this particular robotic vacuum.
UPDATE 06-06-2023: After a couple months of owning the Roborock S7 MaxV and it's self-empty docking station I can say that using it to clean my laminate flooring once a week is more than adequate for a single guy living in a 2050 square foot single story home. I fired if up a lot the first week or so to assess it's capabilities. It was cleaning overkill for my purposes BUT I have zero pets and just one person with no carpets. My experience might have been different had I not first baseline super cleaned the house before beginning to use this vacuum. I mention this because I watched many reviews with videos showing problems with too much pet hair or "dirt" accumulated in the vacuum's dust bin before the thing could even finish a trip around their home's flooring. I've concluded that carpets are tougher for these machines which is why I have no issues with it's performance. Also if a home has 2 adults, 3 kids, 3 dogs, a cat or two and live in the country expecting one of these things to do a perfect job might be a big ask. Particularly if one does not have regular vacuum schedule adjusted to the amount of daily/weekly accumulated dirt. I get buy once a week but a household such as the one described above might require a daily run to avoid massive dirt accumulation in the dust bin before it's finished doing it's thing.
The bottom line here is that this machine appears to be well designed both from a hardware and software standpoint but even artificial intelligence and sturdy hardware have their limitations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2023
★★★★★ 5
Fabulous robovac
Color: Black01
I bought this as a replacement for my iRobot Roomba j7+ (7550). We have been loyal iRobot fans for years but their quality lately has been subpar. The j7+ was a perfect example of it...I spent so much time messing with it getting stuck & having issues I might as well have pulled out the Kirby and just vacuumed myself. After research this machine constantly came back as highly recommended. So far, I can see why!! It does occasionally get stuck under my Island but other than that it works wonderfully and my floors are cleaner than they've been in a long time. The app features are great...I love that I can see mid function exactly where it has cleaned, it was easy to use and program. It works so fast too! The Roomba used to take 6 hours or so to do the 2200 sq feet on our first floor but this one usually does it in less than half that time. And it's soooo much quieter. I've been on Teams meetings with it in my office w/me and no one noticed. I highly recommend this unit!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
★★★★★ 5
It’s not quite perfect, but it’s so much better than cleaning by hand.
I’m going to frame this review as a series of responses to what I imagine are common concerns for potential buyers.
Q. This version doesn’t come with the fancy dock. Is that bad?
A. Yes and no. The robot has an internal dustbin of perhaps 20 cubic inches volume, which is enough to clean a few large rooms in a row without filling up, but only if they’ve been cleaned already recently (which thankfully is usually the case after a while if you’ve set a proper cleaning schedule). That said, since the robot runs as little as once per week or as much as 4 full runs per day (“full run” here meaning the robot runs until its battery reaches 20% and it has to return to dock), depending on your schedule, if a lot of dirt is introduced or you haven’t run it recently, it can get tiresome to empty the dustbin manually. On the one hand, that’s still a lot less effort than manually shoving a vacuum into every corner of the space, but since the robot uses a semi-enclosed dustbin rather than a filter bag, you have to shake all the dust and fibers out of the bin by hand which inevitably leads to a small cloud of dust in your face and around your trash bin. I lasted less than a week before I decided to order the auto- empty, or “plus” dock.
Q. What about my privacy? I heard this model has a camera.
A. It does. It also has an onboard AI to process the images from the camera so it doesn’t need to send them to the cloud for processing. It’s not my job nor my area of expertise to tell you how much privacy you need, but i will say that I’ve had the robot for most of a week and my router has logged a total traffic of about 500MB from the robot. Since I’ve been monitoring the robot from my phone at work and used the remote access function, that’s a reasonable amount.
Q. Remote access?! But what if someone used that to drive around my home taking pictures of my stuff?
A. Well, assuming that they didn’t go to the effort of brute forcing their way past the encryption on the connection, they’d have to have your login information for the app (they’d have to know which brand of robot you got to even know which app to use) and they’d have to enter the dot-pattern lock code that the app asks for every time you use the remote function, and that’s assuming you enabled that function at all, as it’s disabled by default and can only be enabled by physically interacting with the robot. But even assuming that they got past those hurdles, they’d then have the privilege of directing the robot to crawl across your floor at ~5 inches per second while announcing that “remote viewing is active”, and they’d still only have a camera view from 1.5 inches over the ground, which isn’t a great perspective from which to steal someone’s data. Combine that with the fact that the robot is incapable of opening doors and the remote connection can be terminated by pushing any of the easily accessible buttons on the slowly moving robot, and you aren’t exactly left with the stuff of nightmares.
Q. What about the AI? Is it going to take over the world?
A. Well, I can’t be sure about larger AIs, but the one in this robot is nearly smart enough to avoid getting the robot trapped by chairs with crossbars for feet and not quite smart enough to find a way to roll over ethernet cables without tangling them. It helps the robot navigate and it lets you look at pictures of objects the robot has identified as obstructions (if you have that option enabled), but it’s not going to be thinking circles around even the average housepet.
Q. What about this mopping function?
A. I wish I could say that it’s amazing and I don’t think I’ll ever mop again, but that just isn’t so. Mostly it’s because my house was built over half a century ago and the robot was designed last year, but my kitchen is the main area that needs to be mopped and it is unfortunately filled with the sort of cupboards that overhang the floor by a couple inches - just low enough that the robot can’t get under them. As a result, the major splash zones right under the ledge go completely untouched by the mopping operation. As if that weren’t annoying enough, the mop attachment has no way to actually remove fluid from the surface it’s cleaning, so cleaning with it is kinda like putting a moist washcloth on a string attached to a stick and kinda dragging along the ground over the stains: not the most immediately effective option. That said, with enough passes and cleaning of the mop attachment proportional to the amount of material to be cleaned, it eventually gets most of the floor pretty clean. And since individual passes are essentially free as far as personal effort goes… it’s good enough I guess. I just wouldn’t go for this model if all you need done is mopping.
Q. What about the price?
A. Well, at 2-5 times the cost of manually operated vacuums, it is definitely an investment, and it does fall a little short in some ways. For example, it doesn’t agitate carpet as energetically as most vacuums and doesn’t suck quite as hard either, so it’s unlikely to get as much cleaning done on the first pass as other vacuums. Then again, each pass is a significant investment of your time and effort with a regular vacuum, whereas with the robot you just have to tell it where you want it to clean, how many times, and what level of suction or scrubbing to do and it will do the rest on its own (note: it will charge in between cleaning cycles if it needs more charge to be able to finish, but it will resume once it has enough charge and will remember where it left off. second note: depending on which dock you have, you may be required to intervene to empty the dustbin, as well). The other main flaw is that there are some things it just can’t do. The robot is incapable of fitting into tight spaces and can’t climb stairs, so cleaning those areas is right out. In addition, the vacuum roller is several inches from the edge of the robot, so while the side brush can sometimes push loose debris into the vacuum, that pretty much only works on tile, wood and other flat non-porous surfaces. Thankfully, humans and most of our preferred living partners tend not to travel those areas much either, but you can still expect to occasionally need to shove a conventional vacuum around into those awkward spaces. And of course the stairs. In any case, I suppose it’s a long investment, but some napkin math tells me that over the course of the next year, I’ll save approximately 40 hours of cleaning. Assuming the robot lasts past the initial year (given how easy it is to maintain, I rate that as very likely), it will have paid for itself by then in saved labor.
Q. If there was one more thing you’d add to make this product better, what would it be?
A. Fast charging. The robot will automatically attempt to return to its dock when it drops below 20% power. Using the basic charging dock, it takes just over 4 hours to charge after that. In a world where most phones can charge from 20% to 80% in less than an hour (some in less than 15 minutes), I’m not entirely sure why this robot takes over 4 hours to charge. There is something to be said for the longevity gains to be had from slow charging over fast charging, but I think I would have preferred a setting in the app with an explanation attached and a slot on the side of the robot for installing a new battery. I’d like to stress that this is not a critical feature of this robot, but it would be nice to be able to schedule all the cleaning for when I’m at work, but it requires too much battery charge, and the dock can’t replenish it fast enough.
Q. Overall, are you happy with the robot?
A. Yes. Very. I was happy enough with it when all it had done was clean my carpets, but for an extra kick, I decided to ask it to clean my garage, in which everything from woodworking to machining to welding is performed and which hadn’t been cleaned for 2 years. Not only did the robot not catch fire or explode (not even a little, though it did ask me to clean its roller), but it actually cleaned up all the dust, sawdust, metal filings, welding sparks and stray leaves! I honestly hadn’t been sure it would survive that sort of torture test, especially since the manual says it’s only for indoor home use and my garage is not the environment the designers meant when they wrote that. So far, I’m quite impressed and I just hope I can find a way to make it do its job without buying every accessory and replacement part under the sun, since you kind of have to expect that sort of nonsense with companies that try to convince you their product catalogue is a lifestyle.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 18, 2022