SKU: 66381135211
striped philodendron

striped philodendron Philodendron Birkin

Sale price$18.61 Regular price$20.68
Save 10%

Pay in installments of $5.17 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 25 - Jul 30

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

striped philodendron Philodendron BirkinPhilodendron 'Birkin' ('White Measure') Philodendron 'Birkin' is a compact, self heading Philodendron with dark green leaves and fine pale striping. Its pinstripe pattern and upright growth give it a tidy profile in indoor pots, while the short stems keep the plant denser than many climbing Philodendron. The plant grows from short, upright stems with thick petioles. New leaves can open with softer striping and deepen in contrast as they mature, while

Philodendron 'Birkin' ('White Measure')

Philodendron 'Birkin' is a compact, self-heading Philodendron with dark green leaves and fine pale striping. Its pinstripe pattern and upright growth give it a tidy profile in indoor pots, while the short stems keep the plant denser than many climbing Philodendron.

The plant grows from short, upright stems with thick petioles. New leaves can open with softer striping and deepen in contrast as they mature, while each leaf carries its own pattern.

Birkin traits and growth habit

  • Growth habit: Compact, self-heading Philodendron with upright stems and short internodes.
  • Leaf pattern: Dark green leaves carry fine white, cream, yellowish, or light green pinstripes.
  • Leaf variation: Every leaf develops its own stripe density, so the plant changes gradually as it grows.
  • Indoor size: Usually remains compact in pots, with slower, tighter growth when root space is limited.
  • Flowering: Mature plants can produce a spathe and spadix inflorescence indoors, but flowering is uncommon in typical home conditions.

Compact stems and striped leaves

Philodendron 'Birkin' develops as a dense, upright plant. The stems remain short, and the petioles hold leaves outward from the centre, so the pinstriped blades sit clearly around the crown as the plant fills out.

The pale striping sits within the leaf tissue and varies naturally. Some leaves may be strongly striped, while others may be greener or more lightly marked.

Growing Philodendron 'Birkin' indoors

  • Light: Place in bright filtered light. Strong direct sun can scorch the leaves, especially where the pale striping is broad.
  • Watering: Water when the upper part of the substrate has dried. Keep moisture even, then let excess water drain completely.
  • Substrate: Use a loose aroid mix with bark, coco coir or chips, perlite, pumice, and a small moisture-retentive fraction.
  • Drainage: Keep the plant in a pot with drainage holes and avoid dense, collapsed substrate around the central stem and lower roots.
  • Humidity: Around 50–60% or higher supports smooth leaf expansion and reduces dry tips on new growth.
  • Temperature: Keep between 18–28°C. Avoid cold draughts and cold wet substrate, which can slow the central growing point.
  • Feeding: Feed lightly during active growth with a balanced houseplant fertiliser. Reduce feeding when new leaves slow down.
  • Repotting: Repot when roots fill the pot or watering becomes difficult to balance. Move up gradually to avoid excess wet substrate.
  • Pruning: Remove yellow, damaged, or weak leaves close to the stem with clean tools.
  • Semi-hydroponics: Can adapt to airy mineral substrates if roots are cleaned carefully and the central stem stays above the wet zone.
  • Propagation: Use a cutting or division with a viable node and growth point. A single detached leaf cannot become a new plant.

Common issues with Philodendron 'Birkin'

  • Yellowing leaves: Check whether the mix is staying wet for too long. Improve drainage and let the upper substrate dry further before watering again.
  • Brown tips: Often linked to dry air, irregular moisture, fertiliser buildup, or stressed roots. Flush the substrate and stabilise watering.
  • Small new leaves: Check light, root space, and feeding. A compact plant can still slow down when the root ball is depleted.
  • Weak central growth: Inspect the crown and upper roots for rot if new leaves emerge soft, distorted, or unusually pale.
  • Greener new growth: Some leaves may emerge with weaker striping or more green tissue. Remove fully reverted growth back to a healthy patterned point if plain green leaves continue.
  • Pest damage: Thrips, mites, scale, and mealybugs can hide around petioles and new leaves. Check closely if striping becomes scarred or growth twists.

Managing mature growth

Philodendron 'Birkin' keeps a more even shape when the pot is turned occasionally and the plant is not pushed into an oversized container. Older leaves can be removed once they yellow naturally, while healthy leaves are best left in place unless the plant needs reshaping.

If the plant becomes uneven, refresh the shape by removing weak or damaged growth. Stronger correction is best done during active growth, when the plant has enough light and warmth to produce new leaves from the central growing point.

Safety around pets and children

Keep Philodendron 'Birkin' away from pets and children. Like other Philodendron, it contains insoluble calcium oxalate crystals that can irritate the mouth, throat, digestive tract, and sensitive skin. Wear gloves if you react to aroid sap, and wash hands after pruning.

Philodendron genus and Birkin names

Philodendron belongs to the Araceae family. The genus name is commonly translated from Greek roots as “tree-loving”, reflecting the tree-associated growth seen in many Philodendron. The names 'White Wave' and 'White Measure' are also used for this compact pinstriped cultivated Philodendron.

Philodendron 'Birkin' stays compact and upright, with pale striping that shifts naturally from leaf to leaf as the plant matures.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 66381135211

Discover Niche Categories That Outsell striped philodendron

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jen
Port Orchard, US
★★★★★ 1
One year in- DONT DO IT :(
Size: 01-X10 Pro Omni Black, Size: 01-X10 Pro Omni Black
ONE YEAR IN REVIEW I have mixed thoughts because I really like it, the app is great, it cleans great. I’ve stayed on-top of all the maintenance the app has asked me to do and found replacement parts here and there as needed. I have it run everyday and it does a great job, works about as good as I could have imagined in terms of cleaning. Unfortunately exactly one year after purchasing it, 6 days after the one year warranty expired, I started having issues. For about a week I got the same error of “roller brush stuck”. I cleaned the brush, paid for replacement parts, followed every trouble shooting suggestion in the app, same error. Contacted support and did everything they told me to do in terms of trouble shooting. On Reddit I learned this is a common problem and probably from a motor issue. Worked with support for a few weeks and eventually they offered to repair it for me, even though it was a few days over the warranty. Super stoked with that. But had the weirdest interaction with the support people, felt like I was dealing with some like 3rd party questionable service, just not the interactions I expected for such a “high end” expensive product. Contacted them through the app, got an email response and they sent me a shipping label. I packed it up very well, wrapped it up, and sent it off for repair. Like two weeks later get it back on my doorstep, in the same box I sent it in, but all squished. Vacuum just set ontop of the same bubble wrap I sent it in, but like not wrapped or protected . Device was clearly beat up, everything in the box was wet and there were random parts scattered throughout the box and a panel missing from the top of the vacuum that wasn’t even in the box. Also just realized MULTIPLE parts are missing. I’m not only missing a random panel, but also a brush guard, filter and dust bin, all pieces that I sent in. I literally feel like I got scammed. So confused and disappointed. For like a $900 vacuum and only one year out, I’m disappointed to have had such a major issue so quickly and to have such an unprofessional experience with the service group. I’ve never seen something packed so poorly and was shocked, like actually dumbfounded to have found that parts are missing and like such an obvious one too, literally the panel on-top, I noticed it before the box was even open all the way. I couldn’t tell you if it worked or not because with exposed wiring and chips from the missing panel plus all the other missing parts, it literally cannot be used, it’s useless. No idea what to do now besides pray they sent me parts or just replace the thing. UPDATE: 40 something emails later I finally begged someone to send me a new device. Their original suggestion was for me to buy all the replacement parts they took and they would refund me 15% back, ridiculous in my opinion, but I literally cannot buy the most important part, the top panel that was stolen, it’s not something they sell. The “new” device they finally sent me was all scratched up with dirt, gravel, kitty litter and cat food scattered throughout the packaging. The vacuum was literally covered in the gravel and all scratched up. Clearly a returned device that was sent back dirty and no one cleaned it up before sending it to me. I thought it was all cleanable but the scratches were deep and one is right over the camera. I asked if I could exchange it and was literally told I should be grateful they sent me anything and they wouldn’t help me anymore… The customer service is so bad it’s just not worth it, get something else, save yourselves the struggle. Because of all this, I wouldn’t recommend this product. For the price, I’d expect it to last more than a year without a major repair issue needed (replacing the motor) and I’d expect better customer service and a better warranty. Stay away, it’s too expensive and too risky :(
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 28, 2025
P
Verified Purchase
Pamela J
Boise, US
★★★★★ 5
Eufy 30C is MARVELOUS!
Size: 07-C30
I purchased this Eufy 30C after 6 months of chiding from my sister, who has one. Eufy - where have you BEEN my whole life! I have uneven saltillo tile floors in this home - I was sweeping floors nearly everyday just trying to keep the floors clean in this desert environment. On a daily basis, I just could NOT keep the floors clean enough for our barefoot habits. This vacuum cleans VERY well! I turn it loose every day - it cleans under furniture and beds, it cleans my lower-nap area rugs very nicely. I use the Auto mode (random cleaning pattern). The bumper is gentle on furniture legs and walls, the sweeper automatically goes into/out of baseboard cleaning - it cleans all along the walls! Most rugs I can leave in place and let the sweeper clean those, also. The few rugs that do get caught up in the brush, I just pick up before starting the cleaning. I have moved cords so they are permanently not in the way, so I only had to deal with those issues once. The suction on this vacuum is terrific - the combination of the spinning side brushes and the roller brush pick up everything. If the sweeper has been there, the area is spotless! It moves easily from floors to rugs. I normally run the sweeper as we are having breakfast - it is very quiet, although a little "rattling" as it moves across these saltillo tiles. I have used the daily programmed mode, but personally prefer to run it when I am "ready" (some rugs picked up). The vac does not ever seem to "miss" a room using this random pattern, and eventually it seems to get everywhere in a room. It just roams around the house and does it's thing - WITHOUT my help, and better job than I did on a daily basis! I have a large, heavy-nap area rug that I prefer to run the regular sweeper on once a week rather than have my Eufy waste sweeping power there. I placed the boundary strips under the very edges of that rug to keep the Eufy off. This works most times although, occasionally, Eufy finds his way onto that carpet, anyway. I have to remind myself, but I do use an upright sweeper on all the rugs and a canister sweeper for the tile about every one to two weeks. I empty the waste container everyday when cleaning is finished (I am always amazed at how much this sweeper "finds" and picks up!). I also clean the filters everyday with a small, battery powered hand vac (opposite the direction of airflow of the Eufy). This seems to remove the fine dust from the filter. I did purchase an additional filter set. Each week, I change the filter to a clean one, and wash out the used filter under running-spray tap water and let it dry. The filters are disposable pressed paper (and a small foam filter sheet that is also washable), but I have interchanged these two filters for 6 months and they are still working just fine. Emptying the waste container and cleaning/changing the filters is extremely easy and fast. I clean the roller brush of hair and carpet fuzz as needed. I have contacted the company with questions and they were extremely responsive. I also had the brush guard replaced from the company without any issues or questions at all. Customer service was very nice. (I believe the uneven tiles just wore on a very small rubber piece and it eventually came off. Looking back, I really don't believe it affected the performance of the sweeper, or the brush guard, at all. If it happens again, I probably will not bother to replace it). I cannot think of one dislike I have of this Eufy 30c. I believe the price was extremely reasonable for the excellent job it does. It has made a big difference in the attitude I have about this house as the one, most annoying, issue I had - seemingly constantly dirty floors - is now a non-issue. If this sweeper broke down tomorrow, I would have trouble getting another here fast enough!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 3, 2019
G
Verified Purchase
gnfo
Natrona Heights, US
★★★★★ 5
Nice bundle and great customer service
Size: Saros 10R/Qrevo CurvX/Edge 2 Accessories
I purchased this as an economical bundle for my Roborock Qrevo Curv. All of the parts seem to work and fit properly, which is good since I have actually had problems with the main brushes from a different maker. The only issue I ran into was that the Roborock website seemed to indicate that all of the Qrevo Curv models use the same filter size. Apparently the CurvX/Curv 2 Pro use a different filter. When I asked VIEWALL about it through Amazon messaging, they were kind enough to let me know about the difference and even offered to send me filters for my model. So you can count on excellent customer service from the company.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 7, 2026
S
SaminAustin
Pawtucket, US
★★★★★ 4
Affordable Roborock Qrevo CurvX Accessories That Fit Well
Size: Saros 10R/Qrevo CurvX/Edge 2 Accessories, Size: Saros 10R/Qrevo CurvX/Edge 2 Accessories
I have a Roborock Qrevo CurvX vacuum cleaner, so when I saw this replacement parts pack, I wanted to give it a try. The box contained everything needed to carry out the maintenance schedule recommended in the Roborock app. It even included a small screwdriver, which made changing the side brush easy — a thoughtful extra touch. I compared all of the replacement parts to the original ones and didn’t notice any major differences. Overall, the parts do seem slightly lower in quality than the originals, but not to the extent that I think it will significantly affect performance or durability. I replaced the side brush without any issues, and it fit properly. The mop pads were softer and fluffier than the originals and didn’t fit quite as snugly, although I don’t think this will have much impact on cleaning performance. The new filter installed perfectly, and the vacuum bags also fit as expected. Overall, I’m happy with this product. It’s reasonably priced and represents good value for money. I can see myself continuing to use these replacement parts in the future. I’m taking one star off due to the parts being of slightly lower quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
K
Verified Purchase
K
Grantham, US
★★★★★ 5
Value replacements
Size: Saros 10R/Qrevo CurvX/Edge 2 Accessories
As far as I can tell these are pretty solid replacements for the SAROS 10R. My original side brush was all torn up after just a few months of use so I found these replacement parts. Haven’t used the mop pads yet, but they are a similar design to the “upgraded” mop pads offered by Roborock which are superior to the standard one IMO. Everything else seems to be equal quality to the OEM parts, and at less than $12 I have no complaints on this kit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2025

recommand products