Pay in installments of $7.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
peg-perego primo viaggio Primo Viaggio 4-35 Nido Infant Car Seat + Base – Agio BabyPrimo Viaggio 4 35 NIDO is the new generation of protection in infant car seats. From their first ride home, little ones will be completely protected in their own personal nest of comfort. The Primo Viaggio 4 35 Nido features a built in system of safety technologies designed to provide the utmost protection for your child: Load Leg Anti Rebound Bar Pagoda Hood Protects baby from all the elements Extendable with an easy to use zipper UPF 50+ Mesh side
Primo Viaggio 4-35 NIDO is the new generation of protection in infant car seats. From their first ride home, little ones will be completely protected in their own personal nest of comfort. The Primo Viaggio 4-35 Nido features a built-in system of safety technologies designed to provide the utmost protection for your child:
- Load Leg
- Anti-Rebound Bar
- Pagoda Hood
- Protects baby from all the elements
- Extendable with an easy-to-use zipper
- UPF 50+
- Mesh side netting for ventilation
SIP: ADJUSTABLE SIDE IMPACT PROTECTION
- Easily adjusts to six different positions with no re-threading required, even with the infant in the seat.
- Side Impact Protection is developed according to Euro NCAP test protocol.
DUAL STAGE CUSHION SYSTEM
- System includes TWO cushions.
- First stage: supports neck and bottom.
- Enlarged second stage: supports growing baby.
- Both cushions, in Fresco Jersey fabric help to keep baby’s head properly positioned.
PROTECTION AND DURABILITY
- Energy-absorbing EPS-lined shell protects and is perforated to guarantee air circulation.
- EPP-lined headrest for best impact protection and durability.
- INFINITE RECLINE Turning knob allows for setting the base at the proper angle. Tri-zone bubble level indicator.
- ANTI-REBOUND BAR Protects baby minimizing forces and reducing rotations by 50% in a rear collision.
- LATCH storage compartment.
- RIGHT TIGHT SYSTEM Easily and securely locks base in place.
- LOAD LEG Protects baby by stabilizing the seat and reducing rotations by 50% in a front collision.
- Load Leg is adjustable to 10 different positions.
- The Energy Management Foot crumples under load during a crash, absorbing energy away from baby.
- Red/green indicators state when seat is correctly attached to the base.
- If not in use, indicator states when Load Leg is correctly stored.
Dimensions
For babies: 4-35 lbs and up to 32" tall
Seat with Base Dimensions: 28.5" x 17.25" x 26.5"
Seat Weight: 10 lbs
Base Weight: 11 lbs
Other Details
- Urban Mobility. A European belt path and innovative handlebar belt path allows for easy installation without the base, also allowing the handle to act as an anti-rebound bar.
- "Right Tight System." Base is equipped with an innovative system which easily and securely locks the base in place for added stability with either LATCH strap or vehicle’s seat belt.
- Infinite Recline and Trizone Level Indicator. Turning knob can adjust the recline in infinite position, while the indicator allows you to precisely find the proper seat angle to follow your child’s growth.
- Travel System Compatible. Can be used with any Peg Perego G-Matic System stroller, without the need for adapters.
- Fresco Jersey Performance Fabric. Superior quality Fresco Jersey fabric found in head panel and Dual Stage Cushion System is easy to clean, breathable, and absorbs moisture — keeping child cool and comfortable.
- FAA-Approved Certified for use in aircraft.
- NHTSA Certified For automobile or aircraft use, with or without included base.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 5
Expensive Look Without The Expense!
Size: Medium, Color: Black, Size: Medium, Color: Black
Sizing:
If you’re a true large like me and close to but less than fifteen pounds overweight, normal length and with a 44” chest, buy a medium and use the shirt to inspire you to lose the beer belly. If you have similar dimensions but are overweight by up to thirty pounds, get the large.
Materials: The mediums are manufactured to 70% synthetic, 30% linen—which is a great mix, as is doesn’t have to be ironed after it’s washed and hung to dry, nor does it have to be ironed every time you get up from a chair. I’ve had many 100% linen shirts and sure, they look great after you spend thirty minutes ironing them, just to look like a crumpled up newspaper after you get out of your car. My experience with linen shirts is what brought me here.
Unboxing the shirt:
I threw it on an ironing board the moment I unbagged it. I tried the Synthetic setting on the iron—it wasn’t enough. I then tried the Wool setting and set the steam setting to constant medium to high. It worked great. I didn’t have to press down at all, just lightly glided the iron across wrinkled areas of the shirt. Within five minutes, the shirt looked like a hundred-dollar shirt. The material is light, yet feels heavy to the touch and breathes very well in the heat. The hidden buttons give a clean, modern look that allows the shirt to be worn with anything from shorts and sandals to dress slacks and shoes in a club. I like to wear these shirts, untucked with a pair of jeans and western boots. This shirt is very comfortable, fits nice and is extremely versatile.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
★★★★★ 4
Great for the price
Size: Medium, Color: Grey
Nice and light material. Looks good. Suitable for hot temperatures and casual attire. The only thing I've noticed so far that isn't so great, is that the buttons are rather cheap and the middle part broke out on a few of them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
★★★★★ 5
Impressive solution for the price
Configuration: 3-pack, Style: without eero Plus
I'm a network engineer snob who won't hesitate a single second to give most of the home router and wifi junk sold today a terrible review when it's warranted. After having two router/wifi solutions made by that company that starts with Net and ends with Gear fail on me in less than 6 months, I was about ready to spend a few grand on a Ubiquiti solution and wire up my home for access points and cameras. Then a colleague and friend of mine suggested this eero mesh system as a lower cost/effort option. I'm not a fan of plug and play stuff and was skeptical but figured I could return it if not happy. I have to say I'm pretty impressed. The set up was almost too easy. Just download the eero app to your phone, plug a device in and connect the 2.5g port to your router and the app will walk you through it all. Most importantly, it worked really well when solutions like this from other vendors don't forcing you to connect a cable and manually set up. At first I didn't like that there isn't any ability to give the 2.4ghz and 5ghz networks different SSIDs (I had my previous router set up this way and changing this would have meant climbing up a ladder and reconfiguring several Ring cameras) but eero let's you change the name of the Guest Network to anything you want so this was an easy work around. As others have mentioned download the Wifiman app and shortcut and start scanning your house after you install the main router/wifi device. When you find spots that the signal drops below GOOD quality (-70dbm) drop another unit in between the first and where the signal dropped to poor quality. I bought the 3 pack thinking I'd need it to cover a 6,000 sq ft home. However one device was provided good coverage for most of my house and two provided either excellent or good signal strength everywhere inside and even outside on my patio and driveway. I only have one device on the first and second floors and both floors as well as the basement are all receiving good/excellent signal quality. I could have definitely saved $100 and gone with a two pack but I'm ok with having an extra device as a back up or if someone else in the family needs it (keep in mind any of these devices can act as a standalone router/wifi solution) or even to temporarily extend WiFi farther out into my yard in fair weather for outdoor gatherings etc.. Overall I'm impressed. The dashboard and tools/analytics included with the app are more than adequate for home users. You can even set up alerts for new devices connecting to your network. The GUI is modern and responsive and not like some of the traditional router vendors who still support an antiquated web login that takes forever to connect, lags between function and times out frequently. Time will tell if this is reliable but as mentioned a friend and colleague who owns his own network solution business told me he installs these in homes where the cost and wiring of a Ubiquiti or similar solution is prohibitive and he's never had an issue with their performance and reliability.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
★★★★★ 5
Bomb.com
Configuration: 3-pack, Style: without eero Plus
Not sure why this doesn’t have 5 stars from everyone! Got the three device set up and man this couldn’t have been easier to set up. This system is bomb, like I’m not sure how much easier of a setup people even want. Everything was basically plug-and-play, and the app walks you through it so smoothly it almost feels too easy.
Performance-wise, it’s been amazing. The coverage is solid throughout the whole house, and the speeds are not just fast—they’re consistent everywhere on Wi-Fi, not just when you’re hardwired. I haven’t had any random drops or dead zones like I used to deal with. Compared to the Cox gateway, it’s not even close. They charge $15 a month to rent that thing and it doesn’t hold a candle to this setup—honestly kind of ridiculous.
And the quality? Top tier. It honestly feels like an Apple product. From the packaging to the devices themselves, even the cords and the app—everything just feels super polished and premium. I’m actually glad Amazon acquired eero because you can see that level of refinement in the whole experience.
My only complaint is the price tag. $400 is definitely not cheap. But when you break it down, Cox charges $15 a month to rent their gateway—that’s $180 a year. In just about two years, this system basically pays for itself, and you’re getting way better performance the whole time.
Overall, 110% happy with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 25, 2026
★★★★★ 5
Works very well. Very easy to set up.
Configuration: 1-pack, Style: without eero Plus
Previously just had the standard wifi router provided by ATT with fiber connection. It was fine really but some parts of the house lacked good signal. Purchased the 6 Pro E and put the ATT router in bridge mode, the Eero instructions on doing that were perfect and it worked. The 6 Pro E was up and running in minutes and did it's own software updated immediately. Was super easy to rename the network, set the password and permissions and every single device that was previously on the old router connected seamlessly on it's own without any intervention. I think possibly one 2.5GHz device may not have auto-connected but it connected just fine once I put it in pairing mode. We have a lot of devices, mixed 5ghz and 2.5ghz, and so far both networks broadcast fine and everything works. Also 5th Gen Echo Dots seamlessly boost the wifi signal and I already had those in nearly every room before getting the Eero 6 Pro E.
Few things to note:
I don't pay for Eero Plus subscription so I don't use any of the extra reporting features.
New devices connect with what looks like a random code or with a manufacturers name, which usually does not help identify what it is. That can be a challenge when you're trying to figure out if it is something you just added or someone else who managed to get in passed the firewall. Googling the name that shows up does not always help figure out what it is.
For some reason my iphone reconnects every few weeks as a "new device" with a name of "unknown device". This does not happen with my husband's iphone. This means that at any given time there is one active "unknown device" and several others that are inactive with that name. Looks like eventually they drop off the recently connected inactive list. Even if I rename it to something specific, after a few weeks it will reconnect as if it's brand new and I'll get an Eero notification that a new device has connected. It is frustrating to have to continually check the app to make sure it's just my own phone and not something intruding.
The Eero devices have a Zigbee hub built-in but my recent purchase of motorized Alexa compatible shades with Zigbee motors had issues. They connected sort of, but were not functioning in the Alexa app even though both Eero and the shade manufacturer said they should work. Eventually I had to also buy 2 older 4th gen Echo's that also have a Zigbee hub built-in, only then would they be found by Alexa and then they started working in Alexa app with voice and scheduling. However, adding the old 4th gen echos created two more issues: While every single other device in my house on other floors away from the Eero 6 Pro can connect just fine because I have 5th Gen Echos in most rooms boosting the mesh coverage, for some reason, the 4th Gen Echo placed on the second floor could not connect to the 6 Pro E router on the first floor. I had to end up buying a second Eero 6 for the second floor to act as a booster up there as well. Only then did the second floor 4th Gen Echo connect to wifi and stay connected. That's very odd because everything else on the second floor and in the basement and detached garage had no issues connecting to either the wide array of 5th Gen Echos or to the main 6 Pro E on the first floor. The second new issue... the Eero devices are set to roam automatically which is the point of mesh coverage. However, the Zigbee shades hated that feature and would constantly bounce from the nearest 4th Gen Echo to the 6 Pro E and back. Each bounce made them "unresponsive" in the Alexa App. Eventually I had to turn off that roaming feature in the Eero app settings so that every device now connects to whichever Echo or Eero it sees first and then stays there. Defeats the purpose of having mesh but it was the only way to make the $2000 worth of "smart" shades actually work with the network and Alexa.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2025