SKU: 13545023112
3 drawer grey dresser

3 drawer grey dresser Nathan James Kova 3 Drawer 37 in. W Bohemian Dresser Storage Cabinet with Rattan Accent and Metal Legs, Light Oak/Black

$25.44 $28.27
Save 10%
No.2 Bestseller on www.warpunited.com >
Size: 4
Size Recommendation How To Measure

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 12 - Jul 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

3 drawer grey dresser Nathan James Kova 3 Drawer 37 in. W Bohemian Dresser Storage Cabinet with Rattan Accent and Metal Legs, Light Oak/BlackAT A GLANCE Sturdy powder coated metal base and drawer pulls Leveling floor protectors included 3 Drawers on strong metal drawer slides for easy gliding Pair multiple units side by side to make a larger statement piece Durable, woven textilene rattan drawer fronts 26 lb. weight limit per drawer Anti tip hardware included PRODUCT DESCRIPTION Meet Kova, a sleek and sturdy storage piece with a powder coated metal base and durable woven textilene rattan

AT A GLANCE

  • Sturdy powder coated metal base and drawer pulls
  • Leveling floor protectors included
  • 3 Drawers on strong metal drawer slides for easy gliding
  • Pair multiple units side-by-side to make a larger statement piece
  • Durable, woven textilene rattan drawer fronts
  • 26 lb. weight limit per drawer
  • Anti-tip hardware included

PRODUCT DESCRIPTION

Meet Kova, a sleek and sturdy storage piece with a powder-coated metal base and durable woven textilene rattan drawer fronts. With smooth metal slides and leveling floor protectors, it’s perfect for easy use. Pair multiple units for a larger statement. Each drawer holds up to 26 lbs!

STYLE

Modern Contemporary

DIMENSIONS

  • Width: 37.2 inches
  • Height: 34 inches
  • Length: 16.9 inches

WEIGHT LIMIT

154 lbs.

MATERIALS

  • Particleboard, Paper Laminate, Metal, MDF, Textilene

ASSEMBLY & CARE

  • Estimated assembly time: 140 minutes
  • All hardware and instructions included

Care Instructions

Do not modify this product in any way. Our products are designed and tested to meet safety standards. Modifications to the product(s) can result in product failure and/or safety issues which NJ will not be responsible for. Dust with a soft, dry cloth or duster. Clean with a soft, damp, colorfast cloth + mild soap & water. For stubborn stains, use non-abrasive, water-based cleaners only. To protect the finish, avoid the use of chemicals, household cleaners and abrasives. If you are going to use a mild cleaner or chemical, it is recommend to first test it on a small discreet location to see how it reacts with the materials before applying it to visible areas. Avoid flooding laminate surfaces as liquids can seep between the joints and loosen the laminate from the substrate and/or damaging the substrate. Always wipe the surface in the direction of the wood grain and ensure there is no pooling of liquid at the seams. Always use a coaster when setting any vessel containing hot liquids on any surfaces. Blot spills immediately with a clean, damp, colorfast cloth to avoid potential staining. Soak up any remaining moisture immediately with a soft, dry, colorfast cloth to prevent potential watermarks, bubbling, etc. Limit direct contact with heat, moisture and other elements to avoid finish damage. To prevent potential color fading, keep out of direct sunlight. Follow assembly instructions carefully and inspect product upon receipt and each use. Do not make temporary repairs. Do not exceed provided weight limits. Do not use for commercial purposes. Do not leave spilled liquids unaddressed. Do not continue use of product if it has been damaged. Do not place or use on an uneven surface. Do not use products for anything other than their intended purposes. Inspect and re-tighten all hardware connections periodically. Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.

SHIPPING, RETURNS & PRODUCT GUARANTEE

About Nathan James

Nathan James designs modern furniture at an honest price. Our goal is to make your shopping experience simple, from purchase to assembly.

Shipping

All orders ship free. There is no minimum purchase required. In stock products ship next day.

Returns

We offer free returns within 100 days of purchase. There are no return fees, and returns are accepted for any reason. We arrange the pickup.

Product Guarantee

All Nathan James products include a lifetime guarantee. There is no fine print, no hassle, and no registration needed.

Customer Support

You can speak to a real person on our customer support team.

Phone, text message, or WhatsApp: 1-866-619-1004

Email: [email protected]

We have over 50,000 5-star customer reviews and are in over 1 million homes.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 13545023112

Discover Niche Categories That Outsell 3 drawer grey dresser

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 2226 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Elton Smith
Massapequa, US
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
H
Verified Purchase
hearmeout
Carnegie, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Boise, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Boise, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Phoenix, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026

recommand products

Beetlejuice Lydia Deetz Outfits Cosplay Costume Red Wedding Outfits Halloween Carnival Suit
20.42
Pink Dollar Sequin Dress
29.50
Beetlejuice Lydia Deetz in Red Wedding Dress Phunny Plush
21.33
Girls' Red Velvet Sequin Dress Size: 4T Toddler By Mila & Rose
26.15
Gold Sequin Knee-Length Princess Dress for Girls | Gold / 7-8 Years (140cm)
26.88