SKU: 28532279105
blue flapper dress

blue flapper dress Roaring 20s satin dress in dark blue with handkerchief hemline – LaVieDelight

$23.75 $26.39
Save 10%
No.2 Bestseller on www.warpunited.com >

Pay in installments of $6.60 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 15 - Oct 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

blue flapper dress Roaring 20s satin dress in dark blue with handkerchief hemline – LaVieDelightDance away all night at your roaring twenties party with this stunning dress with handkerchief skirt, made of dark blue satin (not quite navy blue). The fabric is super smooth and soft. It drapes very well. This roaring 20s dress can be worn, for example, as a Charleston dance dress or a Great Gatsby party dress. This dress is also available in other colors, both in chiffon and satin, see handkerchief dresses. More dark blue dresses can be found here.

Dance away all night at your roaring twenties party with this stunning dress with handkerchief skirt, made of dark blue satin (not quite navy blue). The fabric is super smooth and soft. It drapes very well. This roaring 20s dress can be worn, for example, as a Charleston dance dress or a Great Gatsby party dress.

This dress is also available in other colors, both in chiffon and satin, see handkerchief dresses.

More dark blue dresses can be found here.

  • This item is made to order and is not in stock
  • The current production time is stated on the announcement bar on the top of this page.
  • Since the product is yet to be made, there is an opportunity to customize it based on your body measurements and height. Check the size chart and if you are not sure which size to choose or need a custom size, please Contact Us before placing your order.

 DRESS DESIGN

The dress is loose fitting, sleeveless and comes with a V neckline both the front and back. It features a drop waist and 2-layered handkerchief skirt, typical of party dresses 1920s. One side of the skirt has a sash attached to it and can be tied up as a bow.

The dress is fully lined with soft breathable rayon fabric, has no zipper and can be slipped on through the head. Professionally and neatly hand-crafted with great attention to small details.

The dress length is a couple of inches below the knee or depending on your height. Check length details below for each size. Please note that because of its drop waist, the dress will look less flattering or less correct if you are a lot shorter or taller than the person’s height recommended for each size. In that case, we recommend ordering a custom size. There are no extra charges for the customization. Contact us for this.

NB: The accessories (necklace, gloves, hats) are not included in the listing.

SIZES

The dress is available in 4 regular sizes, S, M, L, XL, and custom sizes for up to person's bust of 48 inches. The measurements of bust, waist and hips below are of a person’s BODY, not the dress itself.

If you are not sure about sizing, kindly contact us with your body measurements and height. We are more than happy to help you choose the right size.

*The model wears a custom dress based on her body measurements and height.

CUSTOMIZATION

Make sure you know your 'exact' body measurements, which have been measured correctly as instructed in the Size Chart. If you are between sizes send us your measurements and height. We will help consider whether you need a custom size. Most of the time we encourage you have your clothes customized to your body measurements and height so that they fit well, correctly and are body flattering. And you will look great and feel confident in them. We offer custom orders of up to person's bust of 48”. There are no extra fees for size customization. However, a custom item cannot be returned for refund or exchange. Please contact us first if you would like a custom item before placing your order.

CARE

Dry clean or hand wash in cool water (30C) with mild detergent. Hang to dry and iron with low heat.

 

CONTACT US IN CASE OF QUESTIONS

We are based in Thailand. Do not hesitate to contact us if you have questions about this dress or anything in our shop.

Happy shopping.
- Thongbai, on behalf of the La Vie Delight Team.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 28532279105

Discover Niche Categories That Outsell blue flapper dress

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
Diana Crossman
Cuba, US
★★★★★ 5
Quality Printer
Color: Black, Style: ET-2800-B, Pattern Name: Printer
Wonderful multi purpose printer. I bought this months ago and finally got it set up. Set up was easy. Love that the printer is so light weight and fairly compact that I can move it wherever if needed. The supply of ink that came with it was awesome. The ink goes a long way. I have printed out a lot of photos on this printer and the quality has been very good. I have not encountered any paper jams. The photo printing has not been smudged nor has the color been uneven. From documents to photos this little printer does it all and does it very well. When my work printer dies I will be replacing it w another Epson Eco Tank for sure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
J
Verified Purchase
Joy
Omaha, US
★★★★★ 1
0 STARS!! DO NOT BUY!! HORRIBLE!!
Color: Black, Style: ET-2800-B, Pattern Name: Printer, Color: Black, Style: ET-2800-B, Pattern Name: Printer
DO NOT BUY! 0 STARS -I would give 0 stars if I could. This EPSON ET-2800 is the worst printer I have ever owned. -I work from home where I need to do small print jobs throughout the month. I didn’t need a printer that is super fast or had a lot of bells and whistles. I searched many, many, many reviews and this Epson ET-2800 kept coming up as a really good option for my purposes. It had great reviews and it supposedly uses less ink. -I went ahead and bought it and it was delivered Dec. 28. -Throughout the month of January I did a few print jobs here and there. Everything seemed ok. Toward the end of January I noticed that there was black shadowing behind a whole horizontal line on one of my print jobs. The shadow went the whole width of the paper. Thought it was a one-off and didn’t think about it too much since I had so much going on at the time. I also never dreamed that I would need to clean my printer since I hadn’t even owned it for a month at this point. -February 2 I started printing some things for work again and the lettering had lines through the center of the page. Even though I had just had the printer for a month and hadn’t printed that much stuff so I really shouldn’t have to clean it already, I used the “clean nozzle” tool on the printer. **I had to do the cleaning cycle 8 times before it was printing correctly meaning there were no missing segments on the sheet that is printed after the cleaning. ** This was a huge waste of my time and ink and paper!!! -February 16 I attempted to print some pages and again there were lines throughout the papers!! -February 17 I called Amazon to try to get a refund and they said I was outside of the return window. So -I called Epson. I explained what was happening and the lady told me before they would do anything I had to go through some “detailed instructions” on how to clean the printer. Only AFTER I completed all the steps would they even think about helping me. -So first step is to perform a nozzle cleaning per the instructions. Did this. -Instructions say to wait 12 hours before doing anything else. So I waited 12 hours and did another cleaning. Did this twice. The printer showed no broken/missing segments. -So I printed some pages and several of the pages had black smudges/lines/dots on the tops of the pages and most of them had black ink all over the bottom right corners of the papers. -Did the print nozzle cleaning and had broken/missing segments again. -Instructions say to do a head cleaning. Did head cleaning twice I think, and no broken/missing segments. -Printed a few pages and several of the pages had the shadows behind the whole horizontal line again and also some random black dots sprinkled throughout several pages. -Ran a Power Cleaning which is the last step of this process. This process by the way uses up A LOT of ink! My black ink is now less than half!! All the colors are down by ¼! They were full obviously when I started using the printer and the black was only down a smidge at the beginning of this whole cleaning process. -Now I have to wait 12 hours to see if the quality improves. -This is absolutely ridiculous!!! This whole process has wasted my time (each cleaning takes at least 3 minutes to do. The Power Cleaning takes 12 minutes). This whole process has used up a TON of my ink! This whole process has used up a ton of paper!! I shouldn’t have to clean my printer head or nozzle every single time I need to print! I have only had this printer for 7 weeks!!! DO NOT BUY THIS PRINTER! It is junk! I only hope I can get a refund after all this...
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2025
S
Verified Purchase
Sam
Birmingham, US
★★★★★ 5
Almost a year after purchase and this printer has not let me down!
Color: Black, Style: ET-2800-B, Pattern Name: Printer
I wanted to wait to write a review on this printer to see how it held up over time. Happy to report, after almost a year, it is still working perfectly! I was very nervous about purchasing a printer since it was my first time having to shop for one and almost every printer I looked at had something negative to say about the product. After extensive research, I decided to take a leap with the Epson EcoTank 2800. I was looking for a printer to use for recreational use. Something with decent print quality and longevity as well as something on a reasonable budget. I normally print full pages of color and have been using it regularly for around a year and I have about half of the ink that came with the printer left. Safe to say, the ink lasts a while. The quality may not be the top of the line quality you can get with a more expensive printer, but for the price and just everyday use, the quality is satisfactory. It was easy to set up and walked you through the instructions to connect to devices and configure it. The screen is a little small but if you can overlook that, it really is a nice printer. I have used regular printer paper, card stock, and sticker paper with this printer and I try to load only a few sheets at a time to avoid a jam but I haven't had any issues with it so far. Overall, I am extremely happy with my purchase. It can be extremely difficult to find a decent printer and some reviews can be misleading or leave you with questions on if the product is for you. If you are looking for something for printing everyday with decent quality and ink consumption that won't cost you a fortune, this printer is definitely worth taking a chance on!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
S
Verified Purchase
Scott
Lake Worth, US
★★★★★ 4
Printing is great, wifi is a problem (I figured out how to make it work!)
Color: White, Style: ET-2800-W, Pattern Name: Printer
I was on the fence about buying this printer because most of the 1 star reviews all said the same thing... "The Wifi would not work" So I followed the instructions, Turned on the print, downloaded the IOS app, connected to the printer via Bluetooth, installed the ink, initialized the printheads. While that was going on, the app asked me to setup the wifi. a List of SSID's came up and I selected the one I wanted. I put in the password and it connected and the icon on the printer turned blue. I have a Unifi setup and I could see that the printer connected to access point #3 @ 2.4ghz and got an ip address. I locked the IP address to the printer. (For my instructions to work for you, you need to make a reservation or lock the ipaddress that your DHCP server provided to the printer. ) If you don't do this, you will get a different address every time you turn the printer on and the computer and app will not be able to find the printer. When the initialization was complete, the app on my phone said it could not connect to the printer. I decided to try to connect to a computer and come back to the phone app. I downloaded the software package from Epson and ran it. When it went to connect to the printer it could not find it and brings up a list of troubleshooting steps that are not likely to do anything. There are videos about this problem and they are all useless. I am an IT professional with 26 years of experience. I am not going to unplug the printer and wait five minutes, I am not going to re-boot my router, I have a Unifi network environment with over 150 devices connected... (I have great wifi coverage, I am not moving my printer anywhere) My network works just fine, this printer is the issue! So at this point, I know that the printer IS connected to my wifi and it got an IP address. This is not a wifi problem as everyone seems to think it is. It is an issue with the Epson software. I decided to try to install it via the windows printer installer. I selected install via TCP/IP and put the ipaddress that my Unifi system provided to the printer. Windows found the printer and since the Epson app had already installed the drivers... just asked me what drivers I wanted to use. The ET-2800 showed up on the right hand side of the screen. I selected it, it installed and I was able to try a test print. It worked fine. I can print from my computer to the printer via the network. Next was the phone app. The phone app has the option to find the printer via the IP address. I put the IP address in and it found the printer. The phone app works now too. So, It took me some time to get this working, it should not have taken any time at all if the software worked correctly. The printer is really nice, it is a shame that the software is so bad when it comes to connecting to the printer. So if you decide to buy one of these printers, save yourself the headache and just install using the ip address, it is quick and easy that way and it just works. I would have just purchased an HP printer, but I did not want to deal with all the issues of their subscription ink service. I feel like the cost of ink makes this printer worth the hassle of getting it to work.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2024
S
Verified Purchase
Sinbad
New York, US
★★★★★ 5
Premium Print Quality Meets Economic Design
Color: White, Style: ET-2803, Pattern Name: Printer
I am very impressed with the manufacturer quality of this printer. It feels durable and well-engineered. The print quality is equally excellent; colors are vibrant and text is sharp, easily meeting the standards I need for both documents and photos. Moving away from cartridges is a huge win. The ink lasts incredibly long, and the refill process is clean and simple. The only thing I miss is a USB port for printing directly from external storage. My old HP printer had this feature, and it was extremely useful for printing files quickly without a computer. I wish this Epson model included that same convenience. Final Verdict A high-quality, reliable printer that produces great results. If you don't mind the lack of a direct USB drive slot, it’s an outstanding choice for home use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026

recommand products

Men's Long Sleeve Expedition Shirt
24.01
Men's 100% Hemp Linen Long Sleeve Button Down Shirt
25.69
Adley Strapless Mermaid Dress
28.06
Danilynn Gown – One-Shoulder Satin Mermaid Dress
20.51
Men's Big & Tall Westport No-Tuck Long Sleeve Button Down Collar Stretch Performance Floral Print Sport Shirt Black Multi / XLMT
27.22