seventies maxi dress Deadstock Vintage 1970s Maxi Dress by Algo Blue Polyester Jersey
SKU: 43907284664
seventies maxi dress

seventies maxi dress Deadstock Vintage 1970s Maxi Dress by Algo Blue Polyester Jersey

$23.27 $25.86
Save 10%
No.2 Bestseller on www.warpunited.com >
Size: 4
Size Recommendation How To Measure

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

seventies maxi dress Deadstock Vintage 1970s Maxi Dress by Algo Blue Polyester JerseyThis vintage 1970s maxi dress by Algo is a lovely example of Canadian made fashion and comes in excellent condition with its original hang tag still attached. Made from slightly sheer 100% polyester jersey, the fabric has soft stretch and fluid drape typical of 1970s evening and occasion dresses. The dress features a draped cowl neckline in the front and a weighted draped cowl back that creates an elegant flowing silhouette. The sleeveless bodice is

This vintage 1970s maxi dress by Algo is a lovely example of Canadian-made fashion and comes in excellent condition with its original hang tag still attached. Made from slightly sheer 100% polyester jersey, the fabric has soft stretch and fluid drape typical of 1970s evening and occasion dresses.

The dress features a draped cowl neckline in the front and a weighted draped cowl back that creates an elegant flowing silhouette. The sleeveless bodice is fitted at the waist with an elasticized waist and narrow tie belt. The belt features a small fabric flower attached with a pin, allowing it to be repositioned or removed if desired. The skirt falls in long, fluid folds to the hem, creating a classic 1970s maxi silhouette designed to move gracefully when worn.

The Canadian ILGWU union label is present, which was used between 1968 and 1984, confirming the dress was made during this period.

This is a beautiful and wearable example of a 1970s draped maxi dress and is particularly special in well-kept deadstock condition with original tags.

Details

Brand: Algo – Fashion Creations
Era: 1970s
Made in Canada
Fabric: 100% Polyester jersey (slightly sheer, stretch)
Sleeveless
Draped cowl front neckline
Weighted draped cowl back
Elastic waist with tie belt
Fabric flower detail (pinned)
Original hang tag attached
Canadian ILGWU union label

Measurements

Bust: 34” around unstretched / 36” fully stretched
Waist: 21” around unstretched / 26” fully stretched
Hips: Full, skirt meant to fall in drapes
Overall length: 58 1/2”, measured hanging from shoulder to hem

Recommended fit: Small to possibly Small-Medium depending on waist measurement and desired fit.

Condition

Excellent condition / deadstock. The dress appears unused and well stored and retains its original hang tag. No noted flaws.

Note About Model:

Three images show the garment on an AI-generated model to illustrate how the piece looks when worn. These images are for styling and fit reference only - the dress may fit differently on your body. Please refer to the mannequin and detail photos for the actual garment.

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 43907284664

Discover Niche Categories That Outsell seventies maxi dress

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 407 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazonian
Charlottesville, US
★★★★★ 4
Good product, expensive price, poor adhesive
Premium packaging for a premium device. Useful for IR remote signal delivery with extra functions on the side. Price though is luxury for it’s use. Used this for a Logitech Harmony hub control of an non-smart electric fireplace. Setup is a breeze but only if you’re tech savvy. Highly recommend to watch the YouTube video for information on all it’s application. There a many other cheaper devices similar to this available on Amazon that I could have used for the same application. If you have a need for multiple control within the same vicinity of other devices, this may be more useful for you. However, if you plan on utilizing an IR repeater/extender for only a single device and would like to save some money, don’t buy this one. This device works quite well though. Have had no issues achieving the effect needed. Only four stars due to the poor adhesive on the emitter attachment. As stated earlier, I used this on an electric fireplace with a glass surface. I used the attachable emitter to the front glass sensor where the IR receiver was located on the fireplace. After only one day, the emitter attachment fell off even though I made sure the glass was thoroughly cleaned prior to adhering it. Otherwise a good product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2019
J
Verified Purchase
James P. Karl
Louisville, US
★★★★★ 5
Denon avr ir remote port works great with sewell products
I bought a new entertainment center with glass doors and wasn't getting good signal range with the door closed. Plus i couldnt get a good of line site, since this cabinet was shorter than the orginal, and the location for my avr was further to the left than before and now my line of sight to the receiver was blocked from other parts of the room due to high couch back. I tried a couple different cheap $10 devices that used stick on transmitters/receiver buttons but they were clumsy and didn't provide me a total solution for my room layout. Works fantastic with a denon x1800 receiver (and many other models). It works directly with the denon's ir remote port in the back of the avr port. The solution is actually quite simple. Plug a stereo 3.5 mm male to male plug in the denon ir port in the back of the avr and and the other end to the orange emitter box(puck). The pics are about the size of an oreo double stuff cookie Tuck the orange box/puck away whereever and plug the power in. The box doesn't need to seen or be pointed towards anything. It's location is only limited by the length of your stereo cable and access to AC power Put the blue box puck anywhere in the room where you have general line of sight to it from where you will be using your remote, and plug power in. In my case, its sitting on top of one of my tower speakers. From there it clears the back of the couch and can see from the family room, eat-in kitchen area, and the kitchen beyond. Done. I didn't need or use any of the included emitter or transmitter cables, though if you dont have a denon, or other brand avr with an ir port to plug into , or also want to hide the blue puck ( in which case attach the included sensor cable), you'll need them. But for denon users with an ir port, you just use the two pucks and their usb power adapters. Simple.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
T
Verified Purchase
Tjaltz316
Louisville, US
★★★★★ 1
Worked good then died at six months (Updated)
Worked good for a couple of months, then started to develop a lag between when you pressed a button on the remote, and when the TV would respond. If I moved the speaker blocking the TV’s IR receiver, and pointed the remote at it, it worked perfectly. Add the IR blaster back in and the delay returns. The delay kept getting longer and longer, sometimes 5 to 10 seconds. Then it just died. Would not pass any IR signals, even though the receiver and emitter both had power. Tried rebooting, changing communication channels to no avail. Out of Amazon return window. Manufacturer wants you do go through a troubleshooting process for warranty that is too complicated and time consuming. Customer Service Rep at Sewell send me a warranty replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2025
J
Verified Purchase
Jack & Ann Kenny
Cuba, US
★★★★★ 5
Nice Product and Customer Service
I ordered this BlastIR Wireless Pro IR Repeater from Sewell to replace a wired version of an IR repeater from another company. We have moved our TV on to a wall location and are in the process of hiding all the wiring out of sight behind walls and/or in a cabinet. We still have some wires to go, but this product has enabled us to eliminate the IR wiring all together. It's a real improvement in both looks and performance over the cheaper, wired version we originally tried. The BlasterIR's Receiver is the component that faces the room and receives the IR signal from our remote controls. It's small enough to fit in the space between our sound bar and the bottom of the TV. It's range is great for our room size (about 22' long and 18' wide) and picks up the remotes signal from a side angle that's almost parallel to the TV itself. The receiver is powered through one of the USB ports integrated into the TV (although the device itself supports either a USB or regular plug-in option). I haven't used them yet but Sewell appears to have provided a few options to help with affixing the IR devices in their final positions including some adhesive pads and a magnetic pad option as well. I'm still playing around with the permanent placement of the IR Blaster Emitter. It sits inside a closed cabinet and faces the concealed cable box receiver, router and DVR components. It retransmits the various IR signals it receives from the IR receiver by blasting that signal to anything it faces. I just placed it in the cabinet about 5" away from the devices I wanted to control, plugged it in and it worked with no other set up. So far the BlastIR is working seamlessly and with much better function response time than the cheaper IR version we'd tried at first. The lag time between when a button is pressed on the remote control and the action taking place on the device I'm communicating with is minimal. The emitter itself is plugged into an outlet on a surge protector powering the other in-cabinet devices, although it too could be powered via the provided USB connection if desired. As a note, we did experience a shipping issue during our ordering process. The order it self was processed quickly and shipped in a timely manner. However, there was an issue with our actual receipt of the product and the USPS who reported it delivered to our mailbox when in fact it had not been. Regardless, we reached out to Sewell directly and they quickly resolved the issue for us with no problems and in a timely manner. I would recommend both this IR Blaster Pro product as well as Sewell as a trusted company itself.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2021
S
Verified Purchase
Scott C
Draper, US
★★★★★ 3
Does NOT Transmit Through Walls
Quick and easy setup! Works great within the room. However, will not work effectively between walls (i.e. - AV closet to living room).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026

recommand products

Ball Gown Short-Mini Satin Tulle Little White Dress Zipper Back Bridal Dress COCOMELODY 771775523326, 7 Days / Ivory / S
22.36
Men's Slip On Black Loafer Shoes
24.37
Ralph Mens Synthetic comfortable Slip on Casual Shoes
23.40
LaDivine CD0132 Short Lace Off Shoulder Homecoming Dress
20.41
Men's Black Patent Leather Penny Loafers — Horncastle US 7 / Black / D
25.47