esr gear coupon Simpson Strong-Tie Angle Zmax, 2" x 1.5" x 2.75"

esr gear coupon Simpson Strong-Tie Angle Zmax, 2" x 1.5" x 2.75"The Simpson Strong Tie A Reinforcing Framing Angle Bracket is designed to strengthen and stabilize 90 degree wood to wood connections in structural framing applications. Whether you're reinforcing a wall intersection, bracing a corner, or adding strength to a framing joint, these angles provide reliable load transfer and long term performance. Manufactured from durable steel, select models (A21, A21Z, A23, and A23Z) are formed from 18 gauge steel for

The Simpson Strong-Tie A Reinforcing Framing Angle Bracket is designed to strengthen and stabilize 90-degree wood-to-wood connections in structural framing applications. Whether you're reinforcing a wall intersection, bracing a corner, or adding strength to a framing joint, these angles provide reliable load transfer and long-term performance.

Manufactured from durable steel, select models (A21, A21Z, A23, and A23Z) are formed from 18-gauge steel for standard reinforcement applications, while the remaining sizes are constructed from heavier 12-gauge steel for higher load demands. Available in G90 galvanized for light corrosion protection for interior and covered exterior applications or ZMAX finish for enhanced corrosion resistance in exterior applications. Engineered for versatility, the A series framing angles feature pre-punched fastener holes for quick installation and consistent fastening patterns. Whether you're a contractor framing a home or a DIYer reinforcing a project, these brackets deliver dependable structural reinforcement where it matters most.

Key Features

• Reinforces 90° Connections: Designed to strengthen wood framing joints at right angles.
• Multiple Gauge Options: A21, A21Z, A23, and A23Z are manufactured from 18-gauge steel; remaining models are formed from heavy-duty 12-gauge steel for increased load capacity.
• Corrosion Protection Choices:
  • G90 Galvanized: Suitable for light corrosion environments.
  • ZMAX: Enhanced corrosion resistance for exterior or treated lumber applications.
• Pre-Punched Fastener Holes: Helps ensure proper fastener placement and simplified installation.
• Versatile Framing Support: Supports a wide range of structural reinforcement needs.

Applications

• Reinforcing wall-to-floor connections
• Strengthening inside or outside corner framing
• Joist-to-beam or stud-to-plate reinforcement
• Deck framing reinforcement
• General wood framing requiring added rigidity at 90-degree angles

Installation

Install the Simpson Strong-Tie A Reinforcing Framing Angle Bracket using the specified Simpson Strong-Tie fasteners for your selected model and application.

• Use all required fastener holes to achieve maximum published load values.
• Select fasteners compatible with the chosen finish to maintain corrosion resistance.
• Ensure the angle is seated tightly at the joint before fastening.
• Follow Simpson Strong-Tie installation guidance and applicable building codes.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

California Residents: WARNING