SKU: 77042104715
britax discovery

britax discovery Britax Römer Discovery Plus 2 in Dusty Rose

$22.62 $25.13
Save 10%
No.2 Bestseller on www.warpunited.com >

Pay in installments of $6.28 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 28 - Aug 2

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

britax discovery Britax Römer Discovery Plus 2 in Dusty RoseA Trusted Choice for Growing Families When it comes to keeping your child safe on the road, peace of mind is everything. The DISCOVERY PLUS 2 highback booster seat in Dusty Rose is thoughtfully designed to offer that peace of mind, along with everyday practicality and lasting comfort. Made in Germany and developed to meet the latest safety standards, this car seat is ideal for families who want a high quality, easy to use solution for daily travel and

A Trusted Choice for Growing Families

When it comes to keeping your child safe on the road, peace of mind is everything. The DISCOVERY PLUS 2 highback booster seat in Dusty Rose is thoughtfully designed to offer that peace of mind, along with everyday practicality and lasting comfort. Made in Germany and developed to meet the latest safety standards, this car seat is ideal for families who want a high-quality, easy-to-use solution for daily travel and long adventures alike.

With its sleek design and reliable build, the DISCOVERY PLUS 2 is the perfect partner for any car journey – and a reassuring presence for parents who want only the best.

Built to Meet the Latest i-Size Standards

Safety comes first – and the DISCOVERY PLUS 2 doesn’t compromise. This seat is fully compliant with the latest R129 regulations, including the updated i-Size standard that becomes mandatory from September 2023. That means your child will benefit from enhanced protection that meets the most up-to-date requirements for road safety across Europe.

Designed for children measuring 100–150 cm in height (roughly ages 3.5 to 12), the DISCOVERY PLUS 2 grows with your little one, supporting their development while maintaining top-tier safety every step of the way.

Comfort and Convenience, All in One

Longer journeys are easier when your child is happy – and thanks to the generously padded fabric covers and ergonomically optimised seating area, they’ll stay cosy and supported from start to finish. Whether it’s a weekend visit to the grandparents or the daily school run, comfort comes as standard.

The slim design makes this booster seat particularly flexible for families with more than one child – you can fit up to three seats across the back of many cars. And when it’s time to switch vehicles, the clearly marked adjustable headrest helps you get the right fit in seconds.

Installation is quick and secure thanks to the ISOFIX system, which locks the seat firmly into place, reducing movement and increasing safety – without any hassle.

German Engineering with a Greener Footprint

Every DISCOVERY PLUS 2 is made in Germany by BRITAX RÖMER, a name known for exceptional quality and attention to detail. Manufacturing closer to home not only ensures top-tier craftsmanship – it also helps reduce environmental impact by keeping transport distances shorter.

Even the packaging has been carefully considered. The seat arrives in a compact, recycled cardboard box, reducing waste and making delivery more efficient and eco-friendly. It’s one small step that supports a more sustainable future – without compromising on performance or safety.

Key Features

  • i-Size approved under the latest R129 safety regulations

  • Designed for children 100–150 cm tall (approx. 3.5–12 years)

  • Comfort-focused design with soft padded covers

  • Slim fit – install up to three seats across in many vehicles

  • Easy headrest adjustment with clear markings

  • ISOFIX installation for simple and secure fitting

  • Made in Germany for exceptional quality and reduced emissions

  • Ships in recycled packaging – eco-conscious and efficient

  • Lightweight design – only 5.9 kg

Specifications:

Weight: 5.9 kg
Height: 63 – 83 cm
Width: 44cm
Depth: 42cm
Dimensions: H63-83 x W44 x D42cm
Age Range: 15 – 36 kg (Approx 3.5 - 12 years)

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 77042104715

Discover Niche Categories That Outsell britax discovery

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 14 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Janeee
Grantham, US
★★★★★ 5
Fantastic speaker plug at a great price!
Size: 5 Pack, Pattern Name: Banana Plugs
This is a product that gets the job done effectively, and at a good price. Banana plugs are used to clean up speaker wire - you can generally screw in speaker wire, but banana plugs provide a nice interface that allows you to plug in and remove speaker wire as needed. These closed plugs do a good job terminating / hiding the wire. They fit very well into various components and amps that I own. INSTRUCTIONS to install / use them: * Remove around 1" - 2" of the white casing to expose the red and white individual speaker wires * Strip each wire so ~1/2" metal is showing * Make sure the plug end is screwed in tightly (this does not need to come out) * Unscrew the base of the plug from the other end * WithOUT twisting the metal wiring, insert the wire (match wire color with plug color; start with either one) from the bottom of the plug until the metal sticks out the top * Have ~1/4" metal hanging past the plug * take the wiring and drape it down the sides of the plug (just the smooth side, do NOT cover any of the screw threading or it will be very hard to close it) * Spread the draped wiring around the plug as evenly as possible (makes it easier to screw in later) * Screw the two ends of the plug back together (the side with the draped wiring will go inside the plug) * If you get stuck while screwing it back in, unscrew and adjust the wiring * Repeat for the other side, and you're done!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2019
L
Verified Purchase
L. Yu
Phoenix, US
★★★★★ 4
pretty good banana plugs
Size: 5 Pack, Pattern Name: Banana Plugs
i bought these over 6 months ago and i just installed them to the front left and right floor standing speakers - sony ssf-7000 i have them for over 10 years hooked up to a yamaha 7.1 AVR. alot of people have had trouble installing this - one single banana plug comes in 3 parts - the bottom and top (the banana plug tip) can be unscrewed. what i did was tightened the top first (top being the tip of the banana plug) then unscrew the bottom off completely - make sure you have like 3/4" - 1" (depending on your gauge of wire) of exposed speaker wire that is straight - then thread it through the hole at the bottom up - i then rolled the exposed 3/4 - 1" exposed copper wiring into a ball that is bigger than the hole of the banana plug bottom piece so the wire doesn't fall back through where it came from. then i screwed on the top and middle piece back with the bottom piece - tightening it a bit so i know there's good contact. also make sure the tip is screwed in all the way as well as a double check. what you don't want to do is have the copper wire touch the threaded part of the bottom piece - the wire will cut off from the screwing action. i plugged it into my sony speakers and it wasn't a real snug fit - a bit too loose to feel secure - it didn't seem to go all the way in - but it fit fairly well in my receiver. my intention was to use these banana plugs with my 2 channel set up but i decided to go pre-constructed mediabridge 12 AWG speaker cable instead - those fit my 2 channel set up on my receiver and elacs really snug and secure. i tested it and it works fine. i didn't hear any loss of signal or any extraneous noise. none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there. i bought 5 pairs - but i find that it is an odd number to include a package - even numbered pairs would be better. anyway they seem constructed well - easy enough to install and they do work. thanks for reading
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 12, 2019
A
Verified Purchase
AB
Birmingham, US
★★★★★ 5
High quality and robust
Size: 12 Pairs, Pattern Name: Banana Plugs
Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
W
Verified Purchase
William
Los Angeles, US
★★★★★ 5
Solid banana clips
Size: 5 Pack, Pattern Name: Banana Plugs
Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
L
Verified Purchase
Leyland Cypress
Draper, US
★★★★★ 3
Get the right wire guage
Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video. Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug. Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly. Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2012

recommand products

Sweetheart Ivy Plants
22.10
Buy Philodendron Heart Leaf in Trellis
28.34
4" Aeschynanthus Rasta 'Curly Lipstick' hanging basket – Canopy Plant Co
21.87
Pilea 'Aluminum'
21.18
Pilea 'Aluminum'
25.47