suzuki swift roof tent SWIFT 1400 ALUMINUM HARDTOP ROOFTOP TENT – 4x4extrasonline

The Swift 1400 features a 220 x 130cm mattress, at over 7 feet long, this bed is fit for a very tall king and is complemented by a high-density foam mattress and absorbing 3D anti-condensation mat for a total of 8cm of sleeping support and comfort. With a total open height of 163cm, there is plenty of internal headroom for sitting up for a game of cards or to simply get changed. The sleeping quarters maintain optimal comfort thanks to the 23mm insulated roof panel paired with a 280gsm ripstop poly-cotton and a removable thermal roof liner not to mention the aforementioned 3D anti-condensation mat. Access is available via any of the three windows/doors located on each side and the front of the tent. Each entry is complete with dual-layer 120gsm fine mesh and an internal poly-cotton screen. The front entry point is protected by a hooded awning. Internally, you will enjoy the sewn roof organizer pockets perfect for storing books and keys as well as a clear PVC pocket for convenient mounting of your tablet for the occasional movie night! The area is complete with 2 x ventilation windows and power cord Inlets on both sides.

THE SETUP
It really is as simple as unlatching the two clasps, a gentle shove of the lid and the two gas struts will promptly open the tent to its resting position. Expanding and attaching the 150kg rated collapsible ladder is quickly followed by installing the two awning rods and you are done!

THE PACK UP
As simple as it is set, you can be ready to hit the tracks. Remove the awning rods and attach the internal bungee strap which conveniently pulls in the tent sides as the top closes on the tent. Pull down the lid and then pack away the ladder and close the dual latches. You are ready to go.

FEATURES NOT TO FORGET
Here are a few features not to forget about the Swift 1400.

• Set up and pack down as simple as it gets
• Extruded aluminum construction is suited for roof loads while the perimeter extrusion is suited for direct mounting of T-slot accessories
• Maximised internal headspace over 150cm at the peak
• An insulated roof, anti-condensation mat, large windows and additional mesh vents make for a luxurious abode

Gas Strut Assisted Hardlid	Yes
Transit Dimensions (mm)	2300 (L) x 1400 (W) x 190 (H)
Operational Dimensions (mm)	2300 (L) x 1400 (W) x 1630 (H)
Lid Construction	Steel covered Aluminum extrusions with 23mm polystyrene insulated foam panel
Base Construction	Aluminum sheet & extrusions with honeycomb internal board
Frame	Extruded aluminum with reinforced nylon corners
Mattress Size (mm)	2200 (L) x 1300 (W) Double
Mattress Construction	Total 80mm thick 6cm non-deforming high-density foam plus 2cm 3D anti-condensation mat
Body Fabric	280gsm ripstop poly cotton
Fly Fabric	420D polyester
Waterproof Testing	2m water column
Window & Door Awning	Yes
Weight	88kg + (4kg incl roof rails)
Max Capacity	300kg
Ladder Construction & Rating	Collapsible Aluminium  |  150kg