dwarfcraft pedals Pitch Grinder – ROBOTSPEAk

dwarfcraft pedals Pitch Grinder – ROBOTSPEAkDwarfcraft's first Digital pedal is a sequenced pitch shifter called Pitch Grinder. The first foray into the digital realm, the PG smashes your signal down into 8 bits of mayhem, and then tosses them up and down in pitch, in intervals of your choosing. The Pitchgrinder is ready for action! It has eight tunable stages, labeled in sequence on the face of the box, with a handy bunch of LEDs to inform you of which step you are on. The shift range is from

Dwarfcraft's first Digital pedal is a sequenced pitch shifter called Pitch Grinder.

The first foray into the digital realm, the PG smashes your signal down into 8 bits of mayhem, and then tosses them up and down in pitch, in intervals of your choosing.

The Pitchgrinder is ready for action! It has eight tunable stages, labeled in sequence on the face of the box, with a handy bunch of LEDs to inform you of which step you are on. The shift range is from -1 octave to +2 octaves. Don’t worry about hitting the “in between” notes, the PG will only hit what most consider “real” shifting intervals. Of course, if your input is slightly out of tune, your effected signal will be as well.

The engage switch makes the thing go. The tap switch does many things. Of course, it sets the tempo for the unit. When your Grinder is running, depress the tap switch to freeze the pattern where it is. When you release the tap switch, the Grinder will resume running the pattern.

The “Length” knob controls the length of the pattern, from one to eight steps. When the length is set to 1, the Tap switch can be used to cycle to the next stage of shifting.

DC added a feature to push this pedal into outer space… Glide. Glide mode will be turned on and off via a toggle on the face of the unit. This mode is much like the glide function on a synthesizer, winding your pitch up or down to the next step in the pattern.