micro metal gear servo 9gm DIGITAL METAL GEAR MICRO SERVO (SURPASS)

micro metal gear servo 9gm DIGITAL METAL GEAR MICRO SERVO (SURPASS)This popular micro size metal gear servo is appropriate for small RC models where extra strength is needed such as aircraft direct connect retracts and nose gear steering for aircraft and RC cars. The metal gears give it extra strength (less chance of a gear tooth breaking). The servo weighs approx. 9 grams (13. 5 gms including the wire and connector). Supplied with plastic servo arms and mounting screws. (you may simply glue the servo onto the model

This popular micro-size metal-gear servo is appropriate for small RC models where extra strength is needed - such as aircraft direct-connect retracts and nose-gear steering for aircraft and RC cars.  The metal gears give it extra strength (less chance of a gear tooth breaking).

The servo weighs approx. 9 grams (13.5 gms including the wire and connector). Supplied with plastic servo arms and mounting screws. (you may simply glue the servo onto the model if you prefer)

SPECIFICATIONS:

Brand: Surpass Hobby part# S0009M  (metal gear)
Torque: 1.1 kgf.cm at 4.8V; 1.4 kgf.cm at 6V;
No load speed: 0.11s/60 degree at 4.8V; 0.09s/60 degree at 6V;
Product weight: 13.5g (0.47oz);
Outside dimension: 23 x 12 x 27.3mm (0.92 x 0.48 x 1.07inch);
Operating voltage: 4.8V ~ 6VDC;
Working frequency: 1520 μ s / 333hz;

FYI: The two halves of the servo's plastic outer case are held together by micro-size screws, not by a plastic band. Universal connector.